Canon large format printer imagePROGRAF iPF6400 User Manual

6
In the AMedia Type  list, select the type of paper that is loaded. In this case, click  Canon Premium Glossy
Paper 2 280 .
Make sure the paper you select is loaded in the printer.Note
•The types of paper indicated in the printer driver and related software (as well as on the Control Panel) are updatedwhen you install the Media Configuration Tool from the User Software CD-ROM or if you change paper informationby using the Media Configuration Tool. For details, see Media Configuration Tool→P.595.7
After...

12
 
Make sure  CPage Size  on the Page Setup  pane
shows the original size as specified in  CPaper Size  in
the  Page Attributes  dialog box—in this case,  10"x12".
13
Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings 
→P.360"
14
Confirm the print settings, and then click  MPrint  to start printing.
Note
•For tips on confirming print settings, see "Confirming Print Settings →P.364"
Printing from Photoshop
Printing...

•Adjust the color balance, brightness, contrast, saturation, and gray levels.
For instructions on using the printer driver to print Adobe RGB images created in Photoshop, refer to the following
topics, as appropriate for your computer and operating system.•
Printing Adobe RGB Images (Windows)→P.43
•
Printing Adobe RGB Images (Mac OS X)→P.46
Printing Adobe RGB Images (Windows)
Printing Adobe RGB Images (Windows)
This topic describes how to print Adobe RGB images based on the following example.
•
Document:...

8
In the AMedia Type  list, select the type of paper that is loaded. In this case, click  Canon Premium Glossy
Paper 2 280 .
9
 
Click  DAdvanced Settings  to switch the print mode.
10
Click Image  in the  EPrint Priority  list.
11
Select the print quality in the  FPrint Quality  list.
Note
•Options displayed in the FPrint Quality list vary depending on the paper type.12
Click Color  in the  GColor Mode  list.
13
 
Click  HColor Settings  to display the Color Settings
dialog box.
  
Printing Adobe RGB...

14
 
Click the  Matching  tab to display the  Matching sheet.
15
In AMatching Mode , click Driver Matching Mode .
16
In CColor Space , click Adobe RGB .
17
Click OK to close the  Color Settings  dialog box.
18
 
Click the  Page Setup  tab to display the  Page Setup
sheet.
19
In the  APage Size  list, click the size of the original as specified in the source application. In this case, click
10"x12" .
20
Select and click a roll paper in the  LPaper Source  list.
21
Select the width of the loaded...

22
Confirm the print settings and print as desired.Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"
Printing Adobe RGB Images (Mac OS X)
Printing Adobe RGB Images (Mac OS X)
This topic describes how to print Adobe RGB images based on the following example.
•
Document: Adobe RGB image created in Photoshop
•
Page size: 10×12 inches (254.0×304.8 mm)
•
Paper: Roll
•
Paper type: 
Canon Premium Glossy Paper 2 280
•
Roll paper width: 10 inches (254.0 mm)
Important•In...

8
 
Click  DAdvanced Settings  to switch the print mode.
9
Click Image  in the  EPrint Priority  list.
10
Select the print quality in the  FPrint Quality  list.
Note
•Options displayed in the FPrint Quality list vary depending on the type of paper.11
Click Color  in the  HColor Mode  list.
12
Click ISet  to display the  Color Settings  dialog box.
13
Click Matching  to display the  Matching pane.
14
In Matching Mode , click Driver Matching Mode .
15
In Color Space , click Adobe RGB .
16
Click OK to close...

18
Select and click a roll paper in the APaper Source  list.
19
Make sure the width of the loaded roll paper is displayed in the  BRoll Width  list—here,  10-in. Roll
(254.0mm) .
Note
•If the width of the roll loaded in the printer is not shown inBRoll Width, click LPrinter Information on the Mainpane to update the printer information. 20
Make sure  CPage Size  in the Page Setup  pane matches the size of the original as specified in Photoshop—
in this case,  10"x12".
21
Confirm the print...

•Paper type: Plain Paper•
Paper size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
1
Choose Print in the application menu.
2
Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer
Driver Dialog Box from Applications 
→P.181 ")
3
 
Make sure the  Main sheet is displayed.
4
In the  AMedia Type  list, select the type of paper that is loaded. In this case, click  Plain Paper.
5
After confirming that  DEasy Settings  is selected, click  Office...

9
Specify additional printing conditions.
For details on available printing conditions, see " Printer Driver Settings 
→P.174"
10
Confirm the print settings and print as desired.
Note
•For tips on confirming print settings, see "Confirming Print Settings →P.178"
Printing Office Documents (Mac OS X)
Printing Office Documents (Mac OS X)
This topic describes how to print office documents based on the following example.
•
Document: Office document created using word-processing or spreadsheet...