Canon lens EF 24mm f14L II USM User Manual

							EF24mm f/1.4L II USM
Instruction
ENG
COPY  
						

							ENG-1
Thank you for purchasing a Canon product.
The Canon EF24mm f/1.4L II USM lens is a
high-performance wide-angle lens designed
for EOS cameras.
¡“USM” stands for Ultrasonic Motor.Features
1. Aspherical and UD lens elements result in outstanding image delineation.
2. SWC (Subwavelength Structure Coating) dramatically reduces ghosting and flare
caused by light entering at an acute angle.
3. Ultrasonic motor (USM) for quick and quiet autofocusing.
4. Manual focusing is available after the subject comes into focus in autofocus mode (ONE
SHOT AF).
5. A truly round aperture hole results in a nicer background blur.
6. Tight seal structure ensures excellent dust- proof and drip-proof performance.
Conventions used in this instruction
War ning to prevent lens or camera
malfunction or damage.
Supplementary notes on using the lens
and taking pictures.
COPY  
						

							ENG-2
aSafety Precautions
aSafety Precautions•Do not look at the sun or a bright light source
through the lens or camera. Doing so could result
in loss of vision. Looking at the sun directly through
the lens is especially hazardous.
• Whether it is attached to the camera or not, do
not leave the lens under the sun without the
lens cap attached. This is to prevent the lens from
concentrating the sun’s rays, which could cause a
fire.
Handling Cautions• If the lens is taken from a cold environment into
a warm one, condensation may develop on the
lens surface and internal parts. To  prevent
condensation in this case, first put the lens into an
airtight plastic bag before taking it from a cold to
wa rm  environment. Then take out the lens after it
has warmed gradually. Do the same when taking
the lens from a warm environment into a cold one.
• Do not leave the lens in excessive heat such as in
a car in direct sunlight. High temperatures can
cause the lens to malfunction.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
COPY  
						

							ENG-3
Distance scale  (→ 5, 6)Depth-of-Field scale  ( → 6)
Contacts (→ 4) Focus mode switch (→ 5)
Hood mount (→ 7)
Lens mount index  (→ 4)
Filter mounting 
thread (→ 7)
Infrared index  (→ 6)
Focusing ring (→ 5)
Nomenclature
F or detailed information, reference page numbers are provided in parentheses (→  **).
COPY  
						

							ENG-4
See your camera’s instructions for details on
mounting and detaching the lens.
¡After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
electrical contacts from getting scratched.
¡ If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
¡ If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
¡ If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the 
Kindex of the dust cap as shown
in the diagram, and turn clockwise. To remove it,
reverse the order.
1. Mounting and Detaching the Lens
The lens mount has a rubber ring for enhanced
w ater- and dust-resistance. The rubber ring may
cause slight abrasions around the cameras lens
mount, but this will not cause any problems. If the
rub ber ring becomes worn, it is replaceable by a
Canon Service Center at cost.
COPY  
						

							ENG-5
3.Infinity Compensation Mark
To  compensate for shifting of the infinity focus
point that results from changes in temperature.
The infinity position at normal temperature is the
point at which the vertical line of the L mark is
aligned with the distance indicator on the
distance scale.
* For cameras with Live View shooting capability.
F or accurate manual focusing of subjects at
infinity, look through the viewfinder or look at the
magnified image* on the LCD screen while
rotating the focusing ring.
2.Setting the Focus Mode
After autofocusing in ONE SHOT AF mode, focus
manually by pressing the shutter button halfway
and turning the focusing ring. (Full-time manual
f ocus)
To   shoot in autofocus (AF) mode, set the focus
mode switch to AF.
To   use only manual focusing (MF), set the focus
mode switch to MF, and focus by turning the
f ocusing ring. The focusing ring always works,
regardless of the focus mode.
Infinity compensation mark
Distance index
COPY  
						

							ENG-6
5. Depth-of-Field Scale
The depth of field is the distance in front of and
behind the plane of focus on the subject that
appears sharp. The depth of field is indicated by
the area between the depth-of-field scale lines
below the distance scale.
The number on the scale is the F value.
The depth-of-field scale is an approximate
indicator.
The infrared index corrects the focus setting
when using monochrome infrared film. Focus on
the subject manually, then adjust the distance
setting by moving the focusing ring to the
corresponding infrared index mark.
4. Infrared Index
Some EOS cameras cannot use infrared film. See
the instructions for your EOS camera.
¡The infrared index position is based on awav elength of 800 nm.
¡ Be sure to observe the manufacturer’s
instructions when using infrared film.
¡ Use a red filter also when you take the picture.
COPY  
						

							ENG-7
7. Filters (Sold separately)
You can attach filters to the filter mounting thread
on the front of the lens.
¡Only one filter may be attached.
¡If you need a polarizing filter, use the Canon
Circular Polarizing Filter (77mm).
6. Hood
The EW-83K hood can keep unwanted light out
of the lens, and also protects the lens from rain,
snow, and dust.
To   attach the hood, align the hood’s attachment
position mark with the red dot on the front of the
lens, then turn the hood as shown by the arrow
until the lens red dot is aligned with the hoods
stop position mark.
The hood can be reverse-mounted on the lens
for  storage.
¡Pa rt of the picture may be blocked if the hood is
not attached properly.
¡When attaching or detaching the hood, grasp the base of the hood to turn it. To prevent
deformation, do not grasp the rim of the hood to
turn it.
COPY  
						

							ENG-8
8.Extension Tubes (Sold separately)
You can attach Extension Tube EF12 II for
magnified shots. The shooting distance and
magnification are shown below.
Camera-to-SubjectMagnificationDistance (mm)Near Far Near Far
EF12 II 156 167 0.67× 0.50×
9.Close-up Lenses (Sold separately)
Attaching a 500D (77mm) Close-up Lens
enables close-up photography.
Magnification will be 0.05
×– 0.21×.
¡The Extension Tube EF25 II cannot be used with
the lens.
¡Manual focusing is recommended for accurate focusing.
¡Close-up Lens 250D cannot be attached
because there is no size that fits the lens.
¡Manual focusing is recommended for accurate focusing.
COPY  
						

							ENG-9
Specifications
Focal Length/Aperture24 mm f/1.4Lens Construction10 groups, 13 elementsMinimum Aperturef/22Angle of ViewDiagonal: 84° Vertical: 53° Horizontal: 74°Min. Focusing Distance0.25 m / 0.82 ft.Max. Magnification 0.17 ×Field of View 139 ×208 mm / 5.5  ×8.2 inch (at 0.25 m)Filter Diameter 77 mm / 3.0 inchMax. Diameter and Length83.5 ×86.9 mm / 3.3  ×3.4 inchW eight  650 g / 22.9 oz.Hood EW-83KLens CapE-77U/E-77 II
Case LP1319
¡The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm to include the
E-77U lens cap and dust cap, and 24.2 mm for the E-77 II.
¡The size and weight listed are for the lens only, except as indicated.
¡The EF1.4X II/EF2X II extenders cannot be used with this lens.
¡Aperture settings are specified on the camera.
¡All data listed is measured according to Canon standards.
¡Product specifications and appearance are subject to change without notice.
COPY