Home > Canon > Lens > Canon lens TsE 90mm f28 User Manual

Canon lens TsE 90mm f28 User Manual

Here you can view all the pages of manual Canon lens TsE 90mm f28 User Manual. The Canon manuals for Lens are available online for free. You can easily download all the documents as PDF.

Page 1

TS-E24mm f/3.5L 
TS-E24mm f/3.5L 
TS-E45mm f/2.8  TS-E45mm f/2.8 
TS-E90mm f/2.8  TS-E90mm f/2.8 
Instructions
E
EN
N G
G
@@)@+&4,03RYE    1.  

Page 2

ENG-1
Canon’s TS-E lenses are tilt-shift lenses
designed for EOS cameras. The tilt-shift
mechanism enables photographers to control
the depth of field and the area photographed
and to correct image distortion, making it
possible to take sophisticated pictures that
cannot be shot using a conventional lens.
●To   ensure that you make the most of the TS-E lens
functionality, it is recommended that you use it with
an EOS camera with 100% viewfinder visibility
(EOS-1, EOS-1D or EOS-1Ds series) and use the...

Page 3

ENG-2
aSafety Precautions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the...

Page 4

ENG-3
Nomenclature
For detailed information, reference page numbers are provided in parenth\
eses (→**).
Tilt knob ( →7)
Lens mount index ( →5)
Contacts
Shift index
Shift scale ( →9)
Shift knob ( →9)
Depth-of-Field scale ( →11 )
Distance scale ( →5, 11)
Distance index
Infrared index ( →11 )
Tilt scale ( →7)
Tilt index
02-7544_ENG  10.2.13 9:42 AM  Page 3
COPY  

Page 5

ENG-4
Nomenclature
For detailed information, reference page numbers are provided in parenth\
eses (→**).
Tilt lock knob ( →7)
Rotation lock release button (→ 10)
Shift lock knob ( →9)
Filter mounting thread 
(→ 14)
Lens
Hood mount ( →13)
Focusing ring ( →5)
Tilt index
Tilt scale (→ 7)
Shift index
Shift scale (→ 9)
02-7544_ENG  10.2.13 9:42 AM  Page 4
COPY  

Page 6

ENG-5
1.Mounting and Detaching the Lens
Focus a TS-E lens by turning the focusing ring.
(Shots cannot be taken using the auto focus.)
See your camera’s instructions for details on
mounting and detaching the lens.
2. Focusing 
●
When mounting or detaching the lens, always
ensure that the tilt and shift scales are set to the
“0” position.
● After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
contacts from getting scratched.
● If the contacts get soiled, scratched,...

Page 7

ENG-6
3. Tilt Function
Tilting inclines the lens relative to the image plane. When the tilt scal\
e is set to the “0” position, the
focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the
imaging plane.
● Example 1●Example 2
To   shoot so that all of an extensive subject is in focus, you must normally\
 use a small aperture to
obtain a large depth of field. But tilting allows you to keep all of the\
 subject in focus even when there
is insufficient depth of...

Page 8

ENG-7
T
urn the tilt lock knob in the
direction of the arrow to lock
the amount of tilt for the
shot.
Loosen the tilt lock knob by
turning it in the direction of
the arrow.
T
urn the tilt knob to adjust
the amount of tilt. Focus the
shot by turning the focusing
ring.
Using Tilt
● When you tilt the lens, sharp portions of the tilt mechanism are exposed\
 and care should be taken to avoid
touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use...

Page 9

ENG-8
4. Shift Function
Shifting moves the optical axis of the lens in parallel off the center of the imaging plane.
Shift can be used to good effect in the situations shown below.
●If you photograph a subject such as a
building with a normal lens, the top of
the building tapers away. But by placing
the camera parallel to the building and
shifting the lens, you can correct this
tapering effect.●When you are shooting a reflective
subject, you can move the camera to a
position where the camera does not...

Page 10

ENG-9
Using ShiftTurn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
T
urn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
● When you shift the lens, sharp portions of the shift mechanism are expos\
ed and care should be taken to
avoid touching these portions.
● If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only...
Start reading Canon lens TsE 90mm f28 User Manual

Related Manuals for Canon lens TsE 90mm f28 User Manual

All Canon manuals