Canon Lv-7225, Lv-7220, Lv-5220 Multimedia Projector Owners Manual

41
Video Input
This projector has a picture screen resize function, which enables you to display the desirable image size.
Press the MENU button and the On-Screen Menu will
appear.  Press the Point 
7 8button to move the red frame
pointer to the Screen Menu icon.
Press the Point d dbutton and move the red frame pointer to
the function that you want to select and then press the SET
button.
1
2
Move the red frame to a function and
press the SET button.
Screen Menu
Screen Menu icon
Provides image at a wide...

42
Keystone
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8button to move the red frame pointer to
the Setting Menu icon.1
2
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Set the red frame
pointer to the item
and press the SET
button.
Press the Point d dbutton to move the red frame pointer to
the item that you want to set and then press the 
SET...

43
Setting
Logo PIN code lock Dialog Box
QuitPointer
Enter a Logo PIN code
Select a number by pressing the Point 7 8button and fix the
number with the SET button.  The number will change to ✳.  If
you fixed a wrong number, move the pointer to Set or Clear
once by pressing the Point d d
button, then return to Logo PIN
code.  Enter the correct number again.
Repeat this step to complete entering a four-digit number. 
When the four-digit number is fixed, the pointer will automatically
move to Set.  Press the...

44
Setting
Terminal
The RGB IN-2/ COMPONENT IN/ RGB OUT terminal on the back
of the projector is switchable for computer input or monitor
output.  (See page 9)  Select Computer 2 or Monitor Out with the
Point 78button. 
RGB IN-2  . . . . . . .computer input
RGB Out  . . . . . . . .monitor out
Terminal item is not available when selecting Computer 2 to the
input source.  Change the input source to the others (Computer1
or Video) so that the Terminal item will be available.  (p27, 35, 36)   
Ceiling 
Rear...

45
Setting
Lamp mode
This function allows you to change brightness of the screen.
Normal mode ···· normal brightness 
Auto mode ···· brightness according with the input signal
Silent mode ···· lower brightness reduces the lamp power 
consumption and extends the lamp life.
The sound is quiet.
Power management
Time left until Lamp off
Press the SET button at Power
management and this box
appears.  Choose one of three
settings with the Point 7 8
button, and go to the timer
with the Point e ed
d
button and...

46
Setting
Select Spotlight or
Pointer with the Point
e ed
d
button and press
the SET button.  Then
select size or pattern
with the Point 7 8
button.
Pointer
You can emphasize a part of the projected image with this
function.  Choose either Spotlight or Pointer with the Point ed
button and press the SET button.  Then select one of three
different sizes (Large, Middle, and Small) of Spotlight or a pointer
of three different patterns (Arrow, Finger, and Dot) of Pointer.
(See page 12 for operation.)Pointer...

47
Setting
The PIN code can be changed to your desired four-digit
number.
Select PIN code change with the Point d d
button, and press
the SET button.  The New PIN code input dialog box will
appear.  
Select a number with the Point 7 8button and fix the number
with the SET button. Repeat it to complete entering a four-digit
number.  When the four-digit number is fixed, the pointer will
automatically move to Set.  Then press the SET button.  
Be sure to note the new PIN code and keep it at hand.   To...

48
Setting
This function is used to reset the lamp replace counter.  When
replacing the projection lamp, reset the lamp replace counter by
using this function.  See page 53 for operation.Lamp counter reset
Factory default
This function returns all setting values except for the user logo,
PIN code lock, logo PIN code lock and the lamp counter to the
factory default settings.Select Factory default and this
box appears.  Select [Yes] , and
the next box appears. 
Factory default
Select [Yes] to
activate it....

49
Maintenance & Cleaning
The WARNING indicator shows the state of the function which protects the projector.  Check the state of the WARNING
indicator and the POWER indicator to take proper maintenance. 
WARNINGLAMP REPLACE 
 POWER
 AUTO
  SET 
VOL
+
WARNING
blinking red
TOP CONTROL
Wa rn ing Indicator
The projector is shut down and the WARNING indicator is blinking red.
When the temperature inside the projector exceeds the normal
temperature, the projector is automatically shut down to protect
the...

50
Maintenance and Cleaning
Air Filter
Pull up and remove.
Turn off the projector, and disconnect the AC power cord
from the AC outlet.
Turn the projector upside down and remove the air filters by
pulling the latches upward.
1
2
Air filters prevent dust from accumulating on the surface of the optical elements inside the projector.  Should the air filters
become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and
adversely affect the life of...