Canon network camera VBC500VD User Manual
Here you can view all the pages of manual Canon network camera VBC500VD User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 101
3-17 How to Operate VB-C500 Viewer VB-C500 Viewer „Saving the Paused Image How to Operate * Although the sample screen is that of Admin Viewer, you can also save the image in VB Viewer using the same operation. „ Reconnect This function is used to connect to the camera again. To reconnect the camera, click this button. Tip When the video is paused, functions others than Video Display Size, the Pause/Resume button, the Control for Admin button, and the Control for Admin items except the followings...
Page 102
3-18 How to Operate VB-C500 Viewer „Receiving Audio You can receive audio through the microphone attached to the camera. Click this button to receive audio. Displaying Information Viewer information, warning messages, etc., are shown. „Information Message An information message is indicated by a blue icon. An information message appears when a camera operation has been successful. Help messages on various buttons, pull-down lists, etc., and zoom, frame rate and other information from the camera...
Page 103
3-19 How to Operate VB-C500 Viewer VB-C500 Viewer „Warning Message A warning message is indicated by a yellow icon. If an unsupported web browser is used or audio reception stops, a message will be displayed to alert the user. „ Error Message An error message is indicated by an orange icon. An error message will be displayed if the viewer generates an error. Tip For details on the above messages, see List of VB-C500 Viewer Messages ( P. 5-17). COPY
Page 104
![Page 104
3-20
Performing Operations and Settings as the
Administrator
The operations and settings that can only be performed in the Admin Viewer are explained.
Opening Control for Admin Panel
How to Operate
1. Click Obtain/release Camera Control button to obtain the control privileges.
2. Click [Control for Admin].
3. The Control for Admin panel appears.
* You can open Control for Admin without camera control privileges, but all items in the Control for Admin
operation area except External Input Status...](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-103.png "Page 104
3-20
Performing Operations and Settings as the
Administrator
The operations and settings that can only be performed in the Admin Viewer are explained.
Opening Control for Admin Panel
How to Operate
1. Click Obtain/release Camera Control button to obtain the control privileges.
2. Click [Control for Admin].
3. The Control for Admin panel appears.
* You can open Control for Admin without camera control privileges, but all items in the Control for Admin
operation area except External Input Status...")
3-20 Performing Operations and Settings as the Administrator The operations and settings that can only be performed in the Admin Viewer are explained. Opening Control for Admin Panel How to Operate 1. Click Obtain/release Camera Control button to obtain the control privileges. 2. Click [Control for Admin]. 3. The Control for Admin panel appears. * You can open Control for Admin without camera control privileges, but all items in the Control for Admin operation area except External Input Status...
Page 105
![Page 105
3-21
Performing Operations and Settings as the Administrator
VB-C500 Viewer
Operating the External Device Output
You can operate the external device output and display the current output status using an icon.
The [ ON]/[OFF ] status can be switched by clicking this icon.
Example:
Top: Output OFF
Bottom: Output ON
Displaying the External Device Input Status
You can check the status of external device input and display it using an icon. When the external
device receives a contact input signal, the...](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-104.png "Page 105
3-21
Performing Operations and Settings as the Administrator
VB-C500 Viewer
Operating the External Device Output
You can operate the external device output and display the current output status using an icon.
The [ ON]/[OFF ] status can be switched by clicking this icon.
Example:
Top: Output OFF
Bottom: Output ON
Displaying the External Device Input Status
You can check the status of external device input and display it using an icon. When the external
device receives a contact input signal, the...")
3-21 Performing Operations and Settings as the Administrator VB-C500 Viewer Operating the External Device Output You can operate the external device output and display the current output status using an icon. The [ ON]/[OFF ] status can be switched by clicking this icon. Example: Top: Output OFF Bottom: Output ON Displaying the External Device Input Status You can check the status of external device input and display it using an icon. When the external device receives a contact input signal, the...
Page 106
3-22 Performing Operations and Settings as the Administrator Displaying the Motion Detection Status You can display the detection status of the motion detection function. Example: Areas 1 to 3: Detection status OFF Area 4: Detection status ON Controlling/Setting the Camera Click the applicable camera control buttons to pe rform zoom operation and set the speed of each operation. (1) Zoom in/out buttons You can zoom in to/out of the displayed image. Press and hold a button, and the camera will...
Page 107
![Page 107
3-23
Performing Operations and Settings as the Administrator
VB-C500 Viewer
(2) [Zoom] speed
Select a desired operation speed from [ Fas t] and [ Slow].
Setting the Exposure
You can set various options relating to exposure operation.
(1) Exposure Mode
Select [ Auto], [Manual ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ].
If [ Auto ] was selected for [ Day/Night] under [Camera] on the setting page ( P. 1-17), select
[ Auto ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ].
For...](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-106.png "Page 107
3-23
Performing Operations and Settings as the Administrator
VB-C500 Viewer
(2) [Zoom] speed
Select a desired operation speed from [ Fas t] and [ Slow].
Setting the Exposure
You can set various options relating to exposure operation.
(1) Exposure Mode
Select [ Auto], [Manual ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ].
If [ Auto ] was selected for [ Day/Night] under [Camera] on the setting page ( P. 1-17), select
[ Auto ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ].
For...")
3-23 Performing Operations and Settings as the Administrator VB-C500 Viewer (2) [Zoom] speed Select a desired operation speed from [ Fas t] and [ Slow]. Setting the Exposure You can set various options relating to exposure operation. (1) Exposure Mode Select [ Auto], [Manual ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ]. If [ Auto ] was selected for [ Day/Night] under [Camera] on the setting page ( P. 1-17), select [ Auto ], [Auto (Flickerless) ] or [Auto (Shutter-priority) ]. For...
Page 108
![Page 108
3-24
Performing Operations and Settings as the Administrator
(3) Metering ModeWhen [ Auto], [Auto (Flickerless) ] or [Auto (Shutter-priority)] is selected as the exposure mode,
select a desired metering mode from [Center-Weighted ], [Average ] and [Spot].
[Center-Weighted]
The entire screen is metered by focusing on the center of the screen.
Even when slightly darker/brighter areas are present on the periphery of the screen, an
appropriate exposure can be achieved for the subject near the center....](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-107.png "Page 108
3-24
Performing Operations and Settings as the Administrator
(3) Metering ModeWhen [ Auto], [Auto (Flickerless) ] or [Auto (Shutter-priority)] is selected as the exposure mode,
select a desired metering mode from [Center-Weighted ], [Average ] and [Spot].
[Center-Weighted]
The entire screen is metered by focusing on the center of the screen.
Even when slightly darker/brighter areas are present on the periphery of the screen, an
appropriate exposure can be achieved for the subject near the center....")
3-24 Performing Operations and Settings as the Administrator (3) Metering ModeWhen [ Auto], [Auto (Flickerless) ] or [Auto (Shutter-priority)] is selected as the exposure mode, select a desired metering mode from [Center-Weighted ], [Average ] and [Spot]. [Center-Weighted] The entire screen is metered by focusing on the center of the screen. Even when slightly darker/brighter areas are present on the periphery of the screen, an appropriate exposure can be achieved for the subject near the center....
Page 109
![Page 109
3-25
Performing Operations and Settings as the Administrator
VB-C500 Viewer
Setting the White Balance
Select a desired white balance setting from [Auto ], [Light Source ] and [Lock].
(1) [Auto] The white balance is adjusted automatically.
(2) [Light Source] Select the light source from the pull-down menu below according to the condition in which the
camera is used.
[Daylight Fluorescent ] :Select this option to capture video under daylight fluorescent
lighting.
[ White Fluorescent] :Select this...](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-108.png "Page 109
3-25
Performing Operations and Settings as the Administrator
VB-C500 Viewer
Setting the White Balance
Select a desired white balance setting from [Auto ], [Light Source ] and [Lock].
(1) [Auto] The white balance is adjusted automatically.
(2) [Light Source] Select the light source from the pull-down menu below according to the condition in which the
camera is used.
[Daylight Fluorescent ] :Select this option to capture video under daylight fluorescent
lighting.
[ White Fluorescent] :Select this...")
3-25 Performing Operations and Settings as the Administrator VB-C500 Viewer Setting the White Balance Select a desired white balance setting from [Auto ], [Light Source ] and [Lock]. (1) [Auto] The white balance is adjusted automatically. (2) [Light Source] Select the light source from the pull-down menu below according to the condition in which the camera is used. [Daylight Fluorescent ] :Select this option to capture video under daylight fluorescent lighting. [ White Fluorescent] :Select this...
Page 110
![Page 110
3-26
Performing Operations and Settings as the Administrator
(3) [Lock]The white balance is fixed to that of the video currently received.
To forcibly fix the white balance ac cording to the light source, use [One-shot WB].
Example of setting method:
Irradiate a white subject (white paper, etc.) using the light source and capture the subject
over the entire screen. In this condition, select [ One-shot WB].
Note
zSince the light source selection options are based on representative characteristics,...](http://img.usermanuals.tech/thumb/14/1372/w300_network-camera-vbc500vd-1478295481_d-109.png "Page 110
3-26
Performing Operations and Settings as the Administrator
(3) [Lock]The white balance is fixed to that of the video currently received.
To forcibly fix the white balance ac cording to the light source, use [One-shot WB].
Example of setting method:
Irradiate a white subject (white paper, etc.) using the light source and capture the subject
over the entire screen. In this condition, select [ One-shot WB].
Note
zSince the light source selection options are based on representative characteristics,...")
3-26 Performing Operations and Settings as the Administrator (3) [Lock]The white balance is fixed to that of the video currently received. To forcibly fix the white balance ac cording to the light source, use [One-shot WB]. Example of setting method: Irradiate a white subject (white paper, etc.) using the light source and capture the subject over the entire screen. In this condition, select [ One-shot WB]. Note zSince the light source selection options are based on representative characteristics,...