Canon network camera VBC60 User Manual

2-25
Preset Setting Tool
VBAdmin Tools
(11)[Preview] button
Reflect the settings of camera parameters in the preset preview frame. Also, the camera 
angle switches to this preset, and the new angle can be checked in Admin Viewer.
(12)[Admin Viewer] button
Launches Admin Viewer.
Use this button if you want to set a preset while actually checking the image using Admin 
Viewer. 
Orient the camera to the position you want to set as a preset using Admin Viewer, and then 
click the [Get value] button and...

2-26
Preset Setting Tool
„Changing Settings in Preset Preview Frame 
Use the preview frame on the panorama image to set presets. 
How to Set
1. Select the preset you want to set from the preset selection box, and then fill the [Preset name] 
field. 
Be sure to enter the preset name (single-byte alphanumerics). 
2. Drag to move/resize the preset preview frame displayed on the panorama image to set the  preset. 
Clicking on the image moves the preview frame until the clicked point becomes the center. 
At...

2-27
Preset Setting Tool
VBAdmin Tools
„Changing Settings from Camera Angle in Admin Viewer 
Launch Admin Viewer and set its viewing angle as a preset. 
How to Set
1. Select the preset you want to set from the preset selection box, and then fill the [Preset name] 
field. 
2. Click the [Admin Viewer] button to launch Admin Viewer. User authentication is required to access Admin Viewer (  P. xiv).
3. Click Obtain/release Camera Control button on Admin Viewer to obtain the control privileges  of the...

2-28
Preset Setting Tool
5. Click [Apply].Check the status list to make sure the settings have been applied correctly, and then click the 
[Save preset settings ] button to save the settings in the camera. 
Note
zThe preview based on the panorama preview function may vary slightly from the actual 
image. After setting a preset, be sure to confirm with Admin Viewer that the preset has 
been reflected correctly. 
z To apply the manual focus mode, manually adjust the focus while checking the actual 
image...

2-29
Preset Setting Tool
VBAdmin Tools
Preset Tour
Set a preset tour whereby the camera goes around and monitors the multiple presets currently 
set. 
„ Display Screen Preset Tour Setting Area
(1) Tour schedule list
A list of presets for which preset tour has been set is displayed. 
(2) [Add] button Add to the tour schedule list the preset you have set. 
(3) [Up] and [Down] buttons Select each preset in the list and click the [ Up] or [ Down ] button to change the sequence of 
preset tour. In preset...

2-30
Preset Setting Tool
(7) [Speed (PT)]Set the moving speed of the camera during panning/tilting between 1 and 3. Moving the slide 
bar from the left to right increases the value and consequently raises the speed. 
(8) [Speed (Z)] Set the speed of the camera during zoom in a range of 1 to 2. Moving the slide bar from the 
left to right increases the value and consequently raises the speed. 
(9) [Pause (sec)] Set the time at which the camera stops at the preset position between 0 and 120 seconds in...

2-31
Preset Setting Tool
VBAdmin Tools
As a rough guide, the pan/tilt mechanism can withstand 300,000 back-and-forth movements 
in full-angle operation *. The total touring time is determined by a combination of moving 
speed, moving range and pause duration. Set an appropriate time by referring to the table 
below. 
Total touring time until preset tours corresponding to 300,000 back-and-forth movements are 
completed in the pan direction (rough guide) 
Example: Speed (PT): 1, Pause: 30 seconds, Moving...

2-32
Preset Setting Tool
„Setting the Preset Tour
How to Set
1. Select the touring method from [Auto preset tour]. 
Select [ For viewers ] or [Always]. 
2. Select from [Preset] in the preset setting area the preset number you want to add to the tour  schedule, and then click the [Add] button.
The preset is registered in the tour schedule list. Up to 20 presets can be registered. 
3. Select a preset in the tour schedule list and se t the pan/tilt/zoom speeds for each preset using 
the [Speed (PT)], [Speed...

2-33
Preset Setting Tool
VBAdmin Tools
4. Click [Apply].Confirm on the status list that the settings have been applied correctly, and then click the 
[Save preset settings ] button to save the settings in the camera. 
 
Note
If preset tour is used, do not use the motion detection function. Also note that when [ Auto] is 
set under [ Day/Night], the pause time may become longer. 
Tip
The home position cannot be added to the tour schedule list.  

2-34
Motion Detection Setting Tool
This tool is used to set the motion detection function that performs upload, notifies the viewer, 
records a log, etc., if a change has occurred in the captured image due to movement of a 
subject. You can set the position and size of the motion detection area, detection judgment 
conditions, etc., while checking the image on the camera.
The Motion Detection function determines the following items to specify when the camera mode 
should change to [Detected] and the...