Home > Canon > Camera > Canon network camera VBH610D User Manual

Canon network camera VBH610D User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon network camera VBH610D User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Intelligent Function Setting Tool
    111
    6
    Admin Tools
     Click [Clear] to delete the polygonal detection area.
     The camera tampering detection area cannot be changed.
    Changing a [Rectangular] detection area into a [Polygonal] 
    shape or changing a [Polygonal] detection area into a 
    [Rectangular] shape
    Changing the shape of the detection areas already set 
    deletes that area and switches to a new drawing setting.
    „Setting the Detection Line
    Use the image display area to set the detection line. 
    Specify a detection line consisting of a polygonal line with 
    a maximum of 32 angles.
    In the image display area, click the start point of the 
    detection line and then click the end point. To create a 
    detection line consisting of polygonal line, click each 
    angle in the polygonal line in order.
    To confirm a detection line, click any of the already set 
    angles.
    The angles in a confirmed detection line can be dragged 
    to change the shape of a detection line and lines between 
    angles can be dragged to change the position of the 
    detection line.
    Note
     Drag the square marks (■) at each angle to change the shape 
    of the detection line.
     Click [Clear detection line] to delete a detection line.
    „Setting Detection Criteria per Detection Type
    Specify different detection criteria for each detection type.
    Detect criteria for [Moving Object Detection]
    Set detection areas where you want to detect moving 
    objects.
    For [Object Size (%)], enter a value or move the slider to 
    set the ratio of the size of an object moving in the 
    detection area to the size of the detection area.
    When the ratio of an area where the camera has detected 
    a moving object exceeds the value set for [Object Size 
    (%)], detected mode is triggered to ON.When [Object Size (%)] is changed, an indicator frame 
    showing the size of the object is displayed for 1 second in 
    the center of the image display area, allowing 
    specification of the settings while checking the size ratio.
    Any moving objects detected are shown with contour lines.
    If a moving object is smaller than [Object Size (%)], its 
    contour lines are white. If the moving object is larger than 
    [Object Size (%)], its contour lines take on the same color 
    as the detection area, indicating that “detection” mode has 
    been triggered to ON.
    Detect criteria for [Abandoned Object Detection]
    Set areas where you want to detect abandoned objects as 
    detection areas.
    [Object Size (%)]
    Enter a value or move the slider to set the ratio of the size 
    of an object that was left behind in the detection area to 
    the size of the detection area.
    When [Object Size (%)] is changed, an indicator frame 
    representing the area of the object is displayed for 1 
    second in the center of the image display area. This 
    allows you to check the size ratio of the abandoned object 
    detection area while specifying the [Object Size (%)] 
    setting.
    [Duration (Sec)] 
    Set the time that must elapse after an object has been left.
    If both the values for [Object Size (%)] and [Duration 
    (Sec)] are exceeded, detection mode is triggered to ON.
    Object size indicator
    Detection area
    Contour lines of a 
    detected moving 
    object
    Object size indicator
    Detection area 
    						
    							112
    Any moving objects detected are shown with contour lines.
    If [Object Size (%)] and [Duration (Sec)] are not exceeded, 
    contour lines are white. When all detection criteria are met, 
    contour lines take on the same color as the detection area 
    and “detected” mode is triggered to ON.
    Detect criteria for [Removed Object Detection]
    Set detection areas for objects whose removal you want to 
    detect.
    For [Duration (Sec)], set the time that must elapse after 
    the object has been taken away. Detected mode will be 
    triggered to ON when an object is taken away from the 
    detection area for a period longer than the set [Duration 
    (Sec)].
    Any moving objects detected are shown with contour 
    lines. As long as [Duration (Sec)] has not elapsed, 
    contour lines are white. When [Duration (Sec)] has 
    elapsed, contour lines take on the same color as the 
    detection area, indicating that “detected” mode has been 
    triggered to ON.Detect criteria for [Camera Tampering Detection]
    For [Camera Tampering Detection], the entire image 
    display area becomes the detection area. “Detected” 
    mode will be triggered to ON when the image is 
    obstructed over an area exceeding the ratio set in 
    [Change Ratio (%)].
    When [Change Ratio (%)] is changed, an indicator frame 
    representing the area that can be obstructed is displayed 
    for 1 second in the center of the image display area. This 
    allows you to check the change ratio of the camera 
    tampering detection area, which occupies the entire 
    image display area, while specifying the [Change Ratio 
    (%)] setting.
    Any moving objects detected are shown with contour 
    lines. If it is smaller than [Change Ratio (%)], contour lines 
    are white. If the image is changed for an area larger than 
    [Change Ratio (%)], contour lines take on the same color 
    as the detection area, indicating that “detected” mode 
    has been triggered to ON.
    Note
    Detection will not be possible for three seconds after the change 
    ratio is modified when camera tampering detection is selected, or 
    when switching into camera tampering detection from another 
    detection mode.
    Important
    Set detection areas for removed object detection so that they 
    precisely match the contours of the object in question. 
    Influence from the target object’s shadow or adjacent objects 
    may result in the target object being recognized as larger than 
    actual and will not trigger Removed Object Detection. In such 
    cases, reconfigure the detection area to outline the recognized 
    target object.
    Contour of abandoned 
    object
    Removed object 
    detected
    Contour of removed 
    object
    Obstructed area 
    indicator
    Contour of camera 
    tampering object 
    						
    							Intelligent Function Setting Tool
    113
    6
    Admin Tools
    Detect criteria for [Passing Detection]
    Set the passing direction and decision point of the moving 
    object for the detection line that the moving object will 
    cross.
    [Passing Direction]
    Select the direction for moving objects to pass the 
    detection line. When an object that moves in the selected 
    direction passes the detection line, “line crossed” is 
    detected.
    A preview display shows the selected passing direction 
    on the detection line in the image display area.
    [Decision Point]
    Select the decision point of a moving object in 
    accordance with a detection line. When a decision point 
    selected here crosses the detection line, “line crossed” is 
    detected. In the image display area, a cross mark is 
    displayed to indicate the decision point in the detection 
    frame.
    [Object Size (%)]
    Enter or use the slider to set the size ratio of moving 
    objects for the entire screen.
    When a moving object exceeds the value set for [Object 
    Size (%)], it becomes a passing detection target.
    When [Object Size (%)] is changed, an indicator frame 
    showing the size of the object is displayed for 1 second in 
    the center of the image display area, allowing 
    specification of the settings while checking the size ratio.
    Note
     A ratio of up to 30% can be set for [Object Size (%)] in passing 
    detection.
     A passing detection event is notified only when the decision 
    line is crossed. Take care in setting the operation to be 
    performed when an event occurs.
    „Setting by Right-Click Menu
    Right-click on the Intelligent Function Setting Tool display 
    screen to display the menu. There, the following functions 
    can be used.
    [Copy detection area/line] 
    Copy the detection area/line of the detection setting 
    selected.
    [Paste detection area/line] 
    Paste the copied detection area/line to the detection 
    setting selected. It cannot be copied to camera tampering 
    detection. Pasting a detection line is possible only when 
    the source and the target both set passing detection.
    [Clear detection area/line] 
    Clear the detection area/line of the detection setting 
    selected. It cannot be cleared in camera tampering 
    detection.
    [Copy detection criteria settings] 
    Copy the detection criteria of the detection setting 
    selected.
    [Paste detection criteria settings] 
    Paste the copied detection criteria to the detection setting 
    selected. Pasting is possible only if the source and the 
    target are the same detection type.
    [Copy event settings] 
    Copy the event operations of the detection setting 
    selected.
    [Paste event settings] 
    Paste the copied event operations to the detection setting 
    selected.
    „Reducing effects of lighting change
    Intelligent functions may not work when the entire screen 
    is exposed to sudden changes in brightness, for example, 
    when indoor lights are turned on or off. Changing the 
    detection settings may reduce this effect.
    Decision point
    Detection lineDetection frame
    Object size indicator
    Important
    Perform a detection test in advance to make sure that the 
    detection frame continues to be displayed for a subject 
    targeted for passing detection.
    1Click [Detection Settings]. 
    						
    							114
    Note
    Since changing [Detection Settings] restarts the intelligent 
    functions, detection will not be performed during the tens of 
    seconds that it takes to complete a restart.
    „Displaying Event Status
    Click the [Event Display] button to open the event display 
    panel and confirm the detection status icon of the 
    intelligent functions.
    This panel displays the same information as [Intelligent 
    Function (Image Detection)] in the event display panel of 
    the Admin Viewer. For details, see “Displaying Event 
    Status” (p. 143).
    Note
    If the detection setting is not stored in the camera, only the 
    detection status for the currently selected detection setting is 
    displayed.
    2Select [Reduce effects of lighting change].
    3Click [Save settings].
    Important
    A [Reduce effects of lighting change] setting may not work 
    depending on the operating environment. Sudden changes in 
    brightness that persist may also have the same effect. Perform 
    a detection test to check what will work. 
    						
    							115
    Admin Tools
    6
    This tool lets you view the operating condition log of the camera. 
    Display Screens of Log Viewer
    (1) [Download] 
    Download log files from this camera or SD memory 
    cards.
    (2) [Reload] 
    Reload the displayed log file and show the latest logs.
    (3) [Previous File] 
    If there are multiple log files in the cameras internal 
    memory or SD memory card, load and display the file 
    before the currently shown log list.
    (4) [Next File] 
    If there are multiple log files in the internal memory or 
    SD memory card, load and display the file after the 
    currently shown log list.
    (5) [Open local file] 
    Load log files that are saved on a PC to the log display 
    area.
    (6) [Save to local file] 
    Save the displayed log data as a text file to a PC.
    (7) [Source]
    The name of the source from where log files are 
    loaded is shown.
    From the cameras internal memory: 
    Camera (Internal memory)
    From an SD memory card:  Camera (SD card)
    From files saved to a PC: File name(8) [Copy] 
    Copy to the clipboard logs that you have selected on 
    the log display area. 
    (9) [Select all]
    Select all the logs that are shown in the log display 
    area. 
    (10)[Show all logs] checkbox
    When selected, all logs, including those without a log 
    code, are shown.
    (11)Log display area
    The content of log files downloaded from the camera, 
    SD memory card, or PC is shown.
    (12)[Log Type]
    Select log types you want to show using the filter 
    function. 
    [Not specified]: 
    Select to show all log types. 
    [Specify type]: 
    To specify the log type, select the level ([Error], 
    [Warning], [Information]) and output module 
    ([Application], [HTTP Server], [System]) of the log. 
    Multiple checkboxes can be selected. 
    [Specify code]: 
    Logs matching the entered log code are shown.
    Log Viewer
    (1)
    (11)(9) (8) (7)
    (17) (18) (2) (3) (4) (5) (6)
    (12) (10)
    (13)
    (14)
    (15)
    (16) 
    						
    							116
    (13)[Date & Time]
    Set the date and time of the log you want to show 
    using the filter function. 
    Select the [Specify start date & time] or [Specify end 
    date & time] checkbox to set the date and time.
    (14)[Apply filter] 
    Show the filtered logs in the log display area.  
    (15)[Search for]
    Enter the character string for which you want to 
    search. 
    (16)[Match case] checkbox
    Specify whether or not to enable case sensitivity in 
    search commands. When selected, character strings 
    perfectly matching the case in the [Search for] field 
    are searched. 
    (17)[Previous]/[Next] 
    Click [Next] to move down and [Previous] to move up 
    in the search results for (18) [Search].
    (18)[Search] 
    Search logs containing the character string searched 
    in the displayed log list and display them.
    Note
    Logs cannot be deleted in the Log viewer.
    Downloading Log Files
    When Log Viewer is launched, the latest log files will be 
    downloaded and displayed automatically.
    To download a new log file list, click [Download]. A 
    [Download] dialog box is shown where you can select 
    [Internal memory] or [SD Card] as a download source. 
    When the list has been downloaded, a dialog box 
    showing the log file list opens. Select the log file you want 
    to view and click [Download], and the selected log file will 
    be downloaded.
    How to View Logs
    The log contains the following information. 
    
    For the log code, see “List of Log Messages” (p. 152). 
    The log code is shown together with one of three icons 
    corresponding to the applicable level. 
    If the log has no log code, no icon is shown. 
    
    The date and time at which the log was generated. 
    
    A message regarding the log. 
    Information LevelWarning Level Error Level 
    						
    							Log Viewer
    117
    6
    Admin Tools
    „Saving a Log to a File/Opening a Saved Log
    How to Save
    Click [Save to local file] and save using the [Save As] 
    dialog box.
    How to View
    Click [Open local file] and select a log file using the 
    [Open] dialog box.
    „Copying/Searching Logs
    How to Copy
    Click to select the log you want to copy, and then click 
    [Copy].
    How to Search
    Enter the character string for which you want to search in 
    [Search for] and click [Search].
    If the searched log is found, it is shown as selected. 
    Click [Previous] or [Next] to search the log above or 
    below. Lines of logs found are shown as selected.
    „Showing All Logs
    Select the [Show all logs] checkbox.
    When selected, even logs without a log code are shown if 
    [Not specified] is selected for the log type [Filter].
    „Showing Filtered Logs
    You can filter logs by type, code and date & time to show 
    only the necessary information. Set the following conditions and click [Apply filter] to show 
    only the logs matching the specified conditions.
    [Log Type] 
    Select the [Specify type] or [Specify code] checkbox to 
    filter logs by type. If you do not want to filter logs by type, 
    select [Not specified]. 
    • Specify type
    Specify the log level
    Select [Error], [Warning] or [Information] for the level of 
    logs to be shown. 
    Specify log output module
    Select [Application], [HTTP Server] or [System] for the 
    output source module whose logs will be displayed. 
     Specify code
    Specify the log code. Only logs whose code contains 
    the entered characters are shown. If “A0” is entered, 
    for example, logs starting with “A0” are displayed. 
    [Date & Time] 
    Specify start date & time] checkbox
    When this checkbox is selected and a date and time 
    are entered, logs generated on or after the specified 
    date and time are shown.
    Specify end date & time] checkbox
    When this checkbox is selected and a date and time 
    are entered, logs generated on or before the specified 
    date and time are shown.
    Note
    [Application], [HTTP Server], and [System] support the List of 
    Log Messages (p. 152).
    Important
    Logs saved in the cameras internal memory are cleared when 
    you perform [Maintenance] > [Restore Default Settings] and 
    [Reboot], or press the reset switch on the camera. 
    						
    							118
    This utility manages video recorded on an SD memory card. It allows you to play back recorded video and download it to a 
    PC, display a video list or perform filtering.
    Display Screens of Recorded Video Utility
    (1) [Refresh Video List]
    Update the video list to the current state.
    (2) [Refresh Download Status]
    Update video download status to the current state.
    (3) [SD Card Details]
    Displays the dialog box for details about the SD 
    memory card.
    (4) [Number of Videos]
    Displays the number of videos in the video list.
    (5) [Select All]
    Select all video in the video list.
    (6) [Export to mov format]
    Export the [Downloaded] video selected in the video 
    list to a mov format video file.
    (7) Video List
    Displays a list of videos recorded on an SD memory 
    card and downloaded to a PC.
    (8) [Delete from Camera]
    Delete videos selected in the video list from the SD 
    memory card.
    (9) [Download]
    Download videos selected in the video list to a PC.
    (10)[Download to]
    Specify the folder that videos are downloaded to.(11)[Filter]
    Click [Filter] to open or close the filter area. Sets 
    criteria to narrow down the number of items displayed 
    in the video list (p. 119).
    (12)[Playback Videos] Area
    Plays videos selected in the video list (p. 120).
    Recorded Video Utility
    (1)
    (11)(7)
    (10)(9) (8) (5)
    (6) (4)(2) (3)
    (12) 
    						
    							Recorded Video Utility
    119
    6
    Admin Tools
    Confirming Recorded Video
    The video list displays the following information:
    [Date & Time]
    Displays the date and time of a video recording.
    [Format]
    Displays the format of a recorded video ([JPEG] or 
    [H.264]).
    [Recording Type]
    Displays the type of recorded video ([Upload], 
    [Recording-Mode Stream], [Manual], [Timer], [Event]).
    [Upload] indicates video that failed to upload from the 
    camera, and [Recording-Mode Stream] indicates video 
    where video transmission failed when using RM 
    recording-mode stream.
    [Video in Camera]
    Displays whether or not any video remains on an SD 
    memory card. When video has been deleted from an SD 
    memory card after downloading it, this indicator displays 
    [No].
    [Download Status]
    Displays download status of video ([Downloaded], [Not 
    Downloaded], [Partially Downloaded]).
    Note
    Clicking a header in each column sorts the video list.
    „Refreshing Video List
    Click [Refresh Video List] to update the video list to the 
    current state.
    Click [Refresh Download Status] to update download 
    status of the video list to the current state.
    Selecting Videos
    Click a video to select it. Use the Ctrl key or the Shift key 
    while clicking to select multiple videos.Click [Select All] to select all videos on the list.
    Narrowing Down the Number of Videos
    Use [Filter] to narrow down the number of videos that 
    appear in the video list to the ones you need.
    Set the following conditions and click [Apply filter] to show 
    only the videos matching the specified conditions.
    [Date & Time]
    Specify start date & time] checkbox
    When this checkbox is selected and a date and time 
    are entered, videos recorded on or after the specified 
    date and time are shown.
    Specify end date & time] checkbox
    When this checkbox is selected and a date and time 
    are entered, videos recorded on or before the 
    specified date and time are shown.
    [Video Format]
    Select [Specified] and select the checkboxes for the 
    video format ([JPEG] or [H.264]) (multiple selections 
    possible).
    [Recording Type]
    Select [Specified] and select the checkboxes for the type 
    of video recording ([Upload], [Recording-Mode Stream], 
    [Manual], [Timer], [Event]) (multiple selections possible).
    [Video in Camera]
    Select [Not specified], [Yes] or [No].
    [Download Status]
    Select [Specified] and select the checkboxes for the 
    status of video download ([Downloaded], [Not 
    Downloaded], [Partially Downloaded]) (multiple selections 
    possible). 
    						
    							120
    Downloading Video
    Download video recorded on an SD memory card to a PC.
    Click [Browse] to specify a folder.
    The video is downloaded to the specified folder.
    Note
    When the download folder is changed, the download status of the 
    files in the download folder prior to the change becomes [Not 
    Downloaded]. Manually copy the files in the download folder 
    prior to the change to the new download folder to change their 
    status to [Downloaded].
    Downloaded videos are stored in a folder that is automatically 
    created within the specified destination folder and named using 
    the camera IP address (for example, [192.168.100.1]). Quit the 
    Recorded Video Utility before using explorer to browse the 
    folders before and after the change and copy the contents of the 
    folder with the same name as the camera IP address.
    After copying, start up the Recorded Video Utility, click [Refresh 
    Download Status] and the manually copied files will appear in the 
    video list.
    For details on the folder configuration and file naming rules for 
    the download location, see “Directory Structure for Data 
    Downloaded with Recorded Video Utility” (p. 146) in “Chapter 8 
    Appendix”.
    Exporting to Video Files That Can Be 
    Played Back
    Videos downloaded from an SD memory card to a PC can 
    be exported to video files that can be played back on a 
    PC.
    For H.264 video, subdivided files are merged into a single 
    file.
    Videos whose [Download Status] is labeled 
    [Downloaded] in the video list can be exported.The [Browse For Folder] dialog box appears.
    The video is exported.
    Note
     The exported video files can be played back using QuickTime 
    7.7 and Windows Media Player 11/12. For Windows Vista and 
    earlier, use QuickTime. However, playback when using this 
    software is not guaranteed.
     A recorded JPEG video whose size is changed during 
    recording and exported to a mov file cannot be played back by 
    Windows Media Player. Use QuickTime to play it back.
    Playing Back Videos
    Videos selected in the video list can be played back in the 
    [Playback Videos] area.
    The appearance and operations of the [Playback Videos] 
    area differ depending on the selected video format.
    „For JPEG
    [Recording Date & Time]
    Displays the date and time of video frames that are being 
    displayed.
    [Playback Frame No.]
    Displays frame numbers and total number of video frames 
    that are being displayed.
    [Playback Interval]
    
    JPEG video is played back in real time interval 
    according to the recording time. The preceding JPEG 
    video appears in an empty frame.
     [Equal Interval]
    JPEG video is played back at a 1-second interval.
    1Specify the folder to download video to in [Download 
    to].
    2Select a video to download in the video list.
    3Click [Download].
    Important
    Since the Recorded Video Utility processes both files 
    downloaded to a PC and its original videos recorded on the SD 
    memory card, the video list will not display correctly if files 
    downloaded to a PC are manually deleted. In this case, click 
    [Refresh Download Status] to refresh status of data 
    downloaded to a PC.
    1Select a video to export in the video list.
    2Click [Export to mov format].
    3Select a folder to export to and click [OK]. 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon network camera VBH610D User Manual