Canon network camera VBH651V User Manual

Camera Viewer
4
81
Audio transmission starts.
The [Audio Transmission] button icon will change to active (purple) while transmitting audio.
Note
 To transmit audio, you must first set [Server] > [Audio Server] > [Audio Reception from Viewer] to [Enable] in the Setting Pag e 
(P. 148).
 While the icon is active (purple),  audio is constantly transmitted even if  you close the [Video and Audio] menu.
 To use the audio function in environments that  use a proxy server, select [Use a proxy server for your...

82
In the   [Event and Input/Output] menu, you can check the status of output/input operations of an external device, 
intelligent functions, and occurrence of linked events.
Operating External Device Output
You can operate output for t he external device set in [Event] > [Exter nal Device] (P. 156) on the Setting Page.
Click the icon to switch between the ac tive (purple)/inactive (gray) status.
Output 1: Output active
Output 2: Output inactive
Note
To operate [External Device Output] output, it is...

Camera Viewer
4
83
Example:
Setting 1: Image Detection status ON
Other settings: Image Detection status OFF
Note
The icon indicating the detection status will be displayed for a ma ximum of five minutes (except for Moving Object Detection).
(3) [Intelligent Function (Audio Detection)]
Displays the status of [Volume  Detection] or [Scream Detection] set in [E vent] > [Audio Detection] (P. 159) in the 
Setting Page. If detection is triggered, the icon will turn green.
Example:
Volume: Volume Detection...

84 

Chapter
 
Setting Page
The Setting Page enables you to configure all the settings required for using the camera. Please configure the 
settings in the Setting page according to how the camera will be used, before you use the camera.
The Setting Page also provides menus for when the camera is in operation; for example, camera maintenance. 

86
This section explains operations up to displaying the Setting Page, and common Setting Page operations.
Note
 The Setting Page can only be operated by administrators.
 Use the Camera Management Tool in advance to configure  the administrator account and network settings (P. 37).
Accessing the Setting Page
Directly enter the IP address set in the Camera Management Tool (P. 38) to  display the Setting Page of the camera.
Note
You can also access the Setting Page from the Camera Management Tool. For...

Setting Page
5
87
Common Setting Page Operations
This section explains basic Setting Page operations, and operations common to all Setting Pages.
Note
If you have enabled settings in your web browser to not display di alog boxes, you may be unable to perform operations on the Setting 
Page. If this happens, exit your web browser and launch it again.
 Applying Changes to Settings
If you change a setting on the Setting Pa ge, the [Apply] button on the upper right  or lower right of the screen is no...

88
Help
Click   [Help] at the beginning of any setting item  to display a detailed explanation of that setting item.
Setting Ranges and Character Limits
For settings where you must enter numerical values or ch aracters, the setting range or limits on the number of 
characters will be displayed.
Please enter the settings within the displayed limits.
Operating the Video Display Area
Some Setting Pages such as [Initial Sett ing], [Panorama] and [Intelligent Functio n] can be configured using the video...

Setting Page
5
89
(3) Zoom SliderZoom operations are the same as in the viewer (P. 66).
(4) Panorama Screen Displays the range of motion of the  camera on the panorama screen. If a panorama image is re gistered in the 
camera (P. 118), the panorama image is displayed. Yo u can set areas, etc. using mouse operations on the 
panorama screen for some Setting Pages.
(5) [Snapshot] Button Open the snapshot window and display a still image of the moment you clicked the button (P. 77).
(6) [Reconnect] Button...

90
About Each Setting Page
This section will give an overview of each item in the Setting Menu and each submenu.
Each of the [Basic],  [Video and Audio], and [Video Re cord] menus has a [Video] submenu, but the functions are all 
common. The functions can be set in any of the menus and th e settings will be reflected in all of the [Video] submenus.
 Network (P. 93)
Network settings for connecting to the camera.
 User Management (P. 97)
Use this to change administra tor account information, add/
delete...