Canon network camera VBM640V User Manual

							Admin Viewer/VB Viewer
5
171
(1) [Preset Registration] TabRegisters presets.
(2) [Auto Control  Settings] Tab
Displays the Auto Control Settings panel (P. 177).
(3) [Tour Route  Settings] Tab
Displays the Tour Route Settings screen (P. 179).
(4) Preset List Headers The following items appear here. Cli ck an item to sort the list.
[No.]
The number of the preset. If the position for the preset is  outside the view restriction range,   (warning icon) will 
appear on the left.
[Preset Name]
Displays the registered preset name. 
[PTZ Position  Settings]
[Yes] appears if pan, tilt or zoom positions are registered in presets.
[Camera  Settings]
[Yes] appears if camera settings (P. 174)  are registered in presets, and [Yes (partially)] if only partial camera settings 
are registered.
[ S how in viewers]
Shows whether presets are set to be selectable in the Viewers.
[Enable] appears when using [Quick Registration] or for preset s that were registered with [Show in viewers] selected in 
the [Advanced Preset Se ttings] panel (P. 173).
(5) Preset List Presets appear in a list. If you double-c lick a registered preset in the list, you can also check that preset in the video 
display area.
(4)
(5)
(3)
(2)
(6)
(7)(8)(9)
(1) 
						

							172
(6) [Delete]Delete the selected preset. [Home] (home position] cannot be deleted.
(7) Items to Register Menu Select the setting to register with [Quick Registration] (P. 172).
(8) [Quick Registration] Registers the settings selected in  [Items to Reg.] in presets (P. 173).
(9) [Advanced] Displays the [Advanced Preset Settings] panel (P. 173).
Use [Quick Registration]
Note
You can also use the following panels to change the camera angle.– Panorama Display Panel 
– Digital PTZ Panel 
Select [Home] to set the home position.
You can register the following information.
Current PTZ Positions
The current pan, tilt and zoom positi ons displayed in the video display area.
Current Camera  Settings
Current settings for items in Control  for Admin excluding the following items.
 [Pan/Tilt/Zoom] 
 [Video Reception]
1Use the Viewer to display the camera angle in t he video display area that you want to register.
2Configure the video with [Control for Admin] if necessary.
3On the preset list, select the number of  the preset to register, then select the items in [Items to Reg.] to register in 
the preset.
R11R10
M 641M 640M741M740
R11R10 
						

							Admin Viewer/VB Viewer
5
173
 [External Device Output] 
The items selected in [Items to Reg.] for the selected preset numbers will be registered.
Note
 The preset number will be appended to the preset name.
If you want to set your own preset name from the start, click  the [Advanced] button instead of the [Quick Registration] button  and 
follow the steps below for registration.
 If you select a registered preset and cl ick [Quick Registration], the preset settings will be exchanged with the current camer a 
angle and settings.
 Presets set with [Quick Registration] will be selectable in the Viewers.
Register with [Advanced Preset Settings] Panel
You can use the [Advanced Preset Settings] panel to arbitrar ily name presets, load camera information to configure 
advanced preset  settings and perform other tasks.
The [Advanced Preset Se ttings] panel appears.
4Click [Quick Registration]
R11M641M741
1Select a preset for registering advanc ed settings from the preset list.
2Click the [Advanced]. 
						

							174
(1) [Preset Name]Enter a preset name of 64 characters or le ss. Be sure to enter a name in [Preset Name].
(2) [ Show in viewers]
Select this to allow the Viewers to use the preset.
(3) [Pan/Tilt/Zoom]
You can set the pan, tilt and zoom positions by entering values.
The pan, tilt, zoom positions appear.
Note
 This check box cannot be cleared for [Home]  (home position). Be sure to set this.
  (warning icon) will appear to the left of the value  if you enter settings that fall outside the setting range.
(4) Camera Settings
Select the items in Control for Admin to apply to t he preset. For details on each item, please refer to “Use 
Control for Admin” (P. 158).
3Set each item.
(1)
(3)
(4)
(2)
(6)
(5)
(8)
(7)
R11R10
M 641M 640M741M740 
						

							Admin Viewer/VB Viewer
5
175
Note
If one of [Smart Shade Control], [Haze compensation], [Exposure], or [Infrared] (VB-M741LE) is selected, all four will be selected 
automatically.
However, the following combinations cannot be configured. – [Exposure] cannot be set to [Manual] and [Smart Shade Control] cannot be set to [Auto] at the same time.
– [Smart Shade Control] cannot be used if [Haze Compensation]  is set to [Auto] or a manual setting ([1] to [7]).
– [Haze Compensation] cannot be used if [Smart Shade Contro l] is set to [Auto] or a manual setting ([1] to [7]).
– When [Exposure] is set a value other than [M anual], [Infrared] cannot be set to [Level]. 
(5) [Get camera info]
The current video display area camera angle and camera  settings will be loaded into the [Advanced Preset 
Settings] panel.
Use this to apply changes in the came ra angle and settings to the preset.
(6) [Preview]  Click this to have the settings in the [Advanced Pres et Settings] panel applied to the video display area.
(7) [Restore settings] If you previewed incorrect settings, etc., click this  to revert to the settings registered in the camera.
(8) [ Save settings]
Registers the settings in the [Advanced Preset Settings] panel.
The edited preset settings are saved to the camera.
If you configure preset settings, be sure to  save them to the camera using [Save settings].
Context Menu
If you right-click on a preset in the preset list, the following menu appears.
[Preview]
The settings for the preset you right-clicked on are reflected in the video display area.
[Copy]
The settings for the preset you right-clicked on are copied.
[Paste]
Copied preset settings are applied to the preset you right-clicked on.
[Quick Registration]
Registers the settings selected in [I tems to Reg.] in presets (P. 172).
[Delete]
The preset you right-clicked on is deleted. [Home] (home position] cannot be deleted.
Note
The available menu items change dependin g on the preset you right-click on.
Important
If [Manual] is selected in Focus Mode, manually adjust the focus while checking the actual video in the video display area. After 
the focus has been adjusted, set the focus using [Get camera info]. Click [Save settings] to save the focus settings.
4Click [Save settings].
M741 
						

							176
Change Multiple Presets Simultaneously
If you select multiple presets on the preset list and register settings with [Quick Registration] or the [Advanced Preset 
Settings] panel, all of the presets will be configured with the same settings.
Note
Home positions cannot be configured simultaneously. 
						

							Admin Viewer/VB Viewer
5
177
Presets registered in advance can be executed at a specified time or when events trigger the switching of Day/Night Mode. 
Preset camera settings are also applied.
Configure [Auto Control Settings]
Select the [Switch Day/Night] or [Timer]  preset in the [Auto Control Settings] tab, and click the [Save settings]. You can 
register up to 4 timer preset auto controls.
(1) [ Switch Day/Night]
Select each registered preset to be executed when s witching to Day Mode or Night Mode using auto control.
(2) [Timer 1] to [Timer 4] To use a preset at a specified time, set the ti me in 24-hour format and select the preset.
Automatically Move to a Preset Position at a Specified Time 
(Auto Control Settings)
Important
If both [Switch Day/Night] and [Day/Night] > [Day/Night Focus Settings] > [Focus control when switching Day/Night Mode] (P. 165)  have 
been set, [Focus control when switching Day/Night Mode] will be given priority.
Important
 You cannot specify the same time multiple times in [Timer 1] to [Timer 4].
 If the [Timer] set here, and the [Timer] in in the Setting Page are set on the same time, the timer in the Setting Page will h ave priority.
Example) – [Event] >[Timer] > [Start Time] is set to [2:00] in the  Setting Page, select [preset2] as the [Start Time preset]
– [Timer] > [Time] is set to [2:00] in the [Auto C ontrol Settings] tab, and Preset is set to [preset1].
Result: Preset 2 will run at 2:00.
(4)
(3)
(1)
(2) 
						

							178
(3) [Restore settings]Revert to the auto control sett ings registered in the camera.
(4) [ Save settings]
Register the settings for  [Auto Control Settings].
Note
Auto control settings will not be executed  while you have camera control privileges.
Important
[Restore settings] is shared with the [Tour Route Settings] tab. Since clicking this affects both tabs, also take care when restoring tour 
route settings.
Important
[Save settings] is shared with the [Tour Route Settings] tab. Since clicking this  affects both tabs, also take care when saving tour route 
settings. 
						

							Admin Viewer/VB Viewer
5
179
You can have the camera automatically tour multiple registered presets to allow monitoring.
Note
Preset tour is not performed while the camera is being controlled, such as with the Admin Viewer or the Admin Tools.
Preset tour is not performed when control privileges are obtained by RM-Lite.
[Tour Route Settings] Tab
Since the number of tour routes you can register, the numbers of  preset that can be toured per route and the tour conditions 
vary depending on the camera model, sc reen configurations differ as follows.
Configure the Preset Tour Route
Important
 Since use of preset tour could lead to ov eruse of the camera, possibly resulting in camera malfunction, it should only be used when 
necessary. The amount of camera move in unit time can be reduced by  increasing the duration the camera pauses at each point along 
the tour.
 Intelligent Function cannot be us ed while using preset tour.
R11R10
R11R10
(4)
(1)(2)
(3)(5)(6) 
						

							180
(1) [Route List] This is the preset tour route list. It displays the configur ed tour conditions. You can configure five tour routes.
(2) Tour Condition Settings Configure the tour route name and conditions for touring (P. 181).
(3) Select Preset List
Registered presets in the [Preset Se tting] tab appear in this list if [PTZ Position Settings] is [Yes].
Select the preset you want to add to the tour route from this list.
Note
If the position for the preset is outside the view restri ction range,   (warning icon) will appear on the left.
(4) [Tour Presets List]
Presets that will be toured appear in this list. The y will be toured in order from the top of the list.
You can configure settings, such as changing the pres et order and the time to pause at a preset position.
(5) [Restore settings] This discards the settings you ar e configuring and reverts to the se ttings registered in the camera.
(6) [ Save settings]
The settings in the [Tour Route Se ttings] tab are saved to the camera.
Important
[Restore settings] is shared with the [Auto Control Settings] tab. Since clicking this affects both tabs, also take care when r estoring auto 
control settings.
Important
[Save settings] is shared with the [Auto Control Settings] tab.  Since clicking this affects both tabs, also take care when savi ng auto 
control settings.
M 641M 640M741M740
(4)
(3)(5)(6) (2)
R11R10