Home > Canon > Camera > Canon network camera VBM640VE User Manual

Canon network camera VBM640VE User Manual

Here you can view all the pages of manual Canon network camera VBM640VE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 101

Setting Page
4
101
Settings for recording video to a memo ry card when an event is triggered.
[Memory Card Operations] and [Memory Card Information] on this page are commo n with [Memory Card] (P. 130). Settings 
configured in any page will be reflected in the other pages.
Video Record Setting
Sets whether to record video from the camera to  a memory card or upload it with HTTP or FTP.
These can also be set with the [Upload] submenu (P. 96)  and will be reflected in [Video Record Setting] here.
[Video...

Page 102

102
Settings for sending an e-mail notification to a specified recipient when an event is triggered.
E-mail Notification
Set the mail server to be used for e-mail notifications and the content of the e-mail to be sent.
[Notification]
[Subject] and [Body] are text.
If you set [Text with Image], an image (JPEG format)  captured immediately before the event will be attached.
[Mail  Server Name]
Enter the host name or IP  address of the SMTP server.
[Mail  Server Port]
Enter the port number  for the SMTP...

Page 103

Setting Page
4
103
[User Name], [Password]
Enter the user name and password needed for authenticat ion when e-mail authentication is set to [SMTP-AUTH].
[ Subject]
Enter the subject of the e-mail in alphanumeric characters.
[Message Body]
Enter the message body (text) of t he e-mail in alphanumeric characters.
Parameters can be specified in the text using the “%” character (P. 252).
[E-mail Notification Test]
Clicking [Exec] initiates an e-mail notification test based on the settings currently entered....

Page 104

104
Operation settings for external device output and for external device input triggered events.
External Device Output 1, 2
Set the operation for output to the external device.
The camera has two external device outputs.  You can set the output for each of them.
Note
The output for an external device can be switched between active and  inactive with [Control for Admin] > [External Device Output] 
(P. 167).
[Operation Mode]
Select whether the output terminal s are normally open or closed.
When [Normally...

Page 105

Setting Page
4
105
External Device Input 1, 2
Set the operation to be performed when an event is  triggered by input from an external device.
The camera has two external device inputs. You can set the input for each of them.
You can set these if you have selected [E nable] in [External Device Input Event].
Note
An icon in the Admin Viewer Event Display panel will indi cate when there is an external device input event (P. 184).
[Operation Mode]
Select the circuit condition to suit the signal input from...

Page 106

106
[Video Record]
Select whether to record video depending on the event.
If you select [Enable] and an external device input event is triggered, video will be transmitted to the recording destination 
specified in [Video Record Action] (P. 96).
[E-mail Notification]
Select whether to send an e-mail notification depending on the event.
If [Enable] is selected, e-mail notification will be performed when an external device input event is triggered.
To use e-mail notification, you mu st set [Video Record] >...

Page 107

Setting Page
4
107
Audio input from the microphone connected to the camera, such as  loud noises or screams, or when expected audio input 
ceases, can trigger operations such as video recording or e-mail notification.
Note
You can check the audio detection status on the  Admin Viewer Event Display panel (P. 185).
Volume Detection
An audio detection event will be triggered when audio input vo lume is detected exceeding or falling below the reference 
volume setting.
Set the conditions for triggering a vo...

Page 108

108
[Detect Criteria Duration (sec)]
When the status meeting the volume detection criteria has continued for the duration or longer, an ON event is triggered.
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be ex ecuted according to their settings when a 
volume detection event (ON event) is triggered.
[OFF Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be ex ecuted according to their settings when a 
volume...

Page 109

Setting Page
4
109
[Scream Detection Event]
Select whether to use scream detection event.
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be ex ecuted according to their settings when a 
scream detection event  (ON event) is triggered.
[Preset]
If you specify a preset, the camera angle will automatically mo ve to the preset location when a scream detection event is 
triggered.
It is necessary to set presets beforehand with [Control for Ad min] >...

Page 110

110
The timer function can generate events that can trigger operations, such as video recording and e-mail notifications, at 
regular intervals.
You can set the following two types of timers.
 24 hours continuous from specified timer
 Within specified time only
Either type can be set to trigger timer events at regular intervals.
Note
Timer events are different than [Timer] in [Control for Admin] > [Preset/Initial Setting] > [Preset Setting] > [Auto Control Se ttings] tab 
(P. 177).
Timer 1 to 4
You can...
Start reading Canon network camera VBM640VE User Manual

Related Manuals for Canon network camera VBM640VE User Manual

All Canon manuals