Canon network camera VBM741 LE User Manual
Here you can view all the pages of manual Canon network camera VBM741 LE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 61
Setting Page 4 61 Common Setting Page Operations This section explains basic Setting Page operat ions, and operations common to all Setting Pages. Applying Changes to Settings When a setting is changed on the Setting Page, [Apply] show n on the top right and bottom right of the Setting Page changes from grayed-out to blue. Click [Apply] in this state to apply the changed settings. Click [Clear] to revert to the previous settings. Setting Changes Requiring Rebooting Items that require the camera to...
Page 62
62 About Each Setting Page This section will give an overview of each item in Setting Menu and each list of submenus. Each of the [Basic Settings], [Video and Audio]/[Video], and [Video Record] menus has a [Video Settings] submenu, but the functions are all common. The functions can be set in any of the menus and the settings will be reflected in all of the [Video Settings] submenus. Network (P. 64) Network settings for connecting to the camera. Password (P. 68) Use this to change the administrator...
Page 63
Setting Page 4 63 Video Settings (P. 72) Upload (P. 96) Settings for uploading video via HTTP or FTP when an event is triggered. Memory Card (P. 101) Settings for recording video to a memory card when an event is triggered. The settings of this item are the same as those of the [Memory Card] menu. The sett ings can be made with either of them. E-mail Notification (P. 102) Settings for sending an e-mail notification to a specified recipient when an event is triggered. Video Record Event...
Page 64
64 Network settings for connecting to the camera. LAN Set the LAN communication method and size of video transmitted from the camera. [LAN Interface] Select the interface suited to the device for connecting to the camera. Generally use [Auto]. [Maximum Packet Size] Enter the maximum packet size to be transmitted by the camera. Normally there is no need to change the default setting of 1500. A setting of 1280 or greater is necessary when using IPv6. When using ADSL, setting a slightly lower va lue may...
Page 65
Setting Page 4 65 For [Manual], enter a fixed IPv4 address into [IPv4 Address]. For [Auto (DHCP)], the settings acquired from the DHCP server will be automatical ly entered in [IPv4 Address], [Subnet Mask] and [IPv4 Default Gateway Address]. [IPv4 Address] When [IPv4 Address Setting Method] is set to [Manual], enter a fixed IPv4 address. The IP address cannot start wi th 127., such as 127.0.0.1. [ Subnet Mask] When [IPv4 Address Setting Method] is set to [Manual], ent er the designated subnet mask...
Page 66
66 [IPv6 Address (Manual)] Enter a fixed IPv6 address if you set the address manually. [Prefix Length] Enter a prefix length if [Disable] is specified in [Auto (RA)]. [IPv6 Default Gateway Address] Enter a default gateway address if [Disable] is specified in [Aut o (RA)]. Be sure to set this when connecting the camera to a different subnet from that of the Viewer. [IPv6 Address (Auto)] If [Enable] is specified in [IPv6] and [Enable] is specified in [Auto (RA)] and [Auto (DHCPv6)], then the...
Page 67
Setting Page 4 67 [Host Name] You can register the camera host name in name server using alphanumeric characters. Do not use “_” (underscore) in the hos t name in Internet Explorer 8/9/10/11. [Host Name Registration with DDN S] When you enter a name into [Host Name] and select [Enable] , the host name will be registered in the name server. Registering the host name to DDNS is useful when operating with [IPv4 Address Setting Method] set to [Auto (DHCP)] (P. 64). DNS server registration settings must be...
Page 68
68 In order to prevent users, other than administrators, from changing the system, change the administrator password from the default password. Administrator Password Change the administrator password. [Password] Enter the administrator password in alphanumeric characters (spaces or printable characters). The factory default setting is “camera”. If the Admin Viewer, Admin Tools, etc., are connected, terminate the c onnection before changing the password. [Confirm Password] Enter the same password as...
Page 69
Setting Page 4 69 Camera date and time settings. Current Date and Time The date and time set in the camera are shown. Setting Set the date and time setting method, time zone and daylight saving time for the camera. [ Setting Method] Select the date and time setting method. The settings are configured as follows depending on the setting configured in [Setting Method]. [ Set manually] Set the desired date and time in [Date] and [Time]. Set the time in 24-hour format in order. [ Synchronize with NTP...
Page 70
70 [Use DHCP] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCP server. The acquired NTP server address ap pears in [NTP Server (DHCP)]. In order to set [Use DHCP], you must change [Network] > [IPv4] > [IPv4 Address Setting Method] to [Auto (DHCP)] (P. 64). [Use DHCPv6] The camera time is synchronized with the time of the NTP server at the address acquired from the DHCPv6 server. The acquired NTP server address a ppears in [NTP Server (DHCPv6)]. In...