Home > Canon > Camera > Canon network camera VBM741 LE User Manual

Canon network camera VBM741 LE User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon network camera VBM741 LE User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Admin Tools
    6
    211
    Video Detection
    Detects changes to video in a specified area. Th ere are 6 types of detection to suit your needs.
    Moving Object Detection
    Detect moving objects. This function can be used  to detect visitors or suspicious individuals.
    Moving object detection is triggered while mo ving objects are inside the detection area.
    Abandoned Object Detection
    Detect objects that are carried in and abandoned for a certain duration. Th is function can be used to detect 
    suspicious objects that have been left behind. Abandoned object detection is triggered when an object is left in the 
    detection area for a specified duration.
    Removed Object Detection
    Detect objects that have been re moved. This can be used to detect actions  such as the taking away of valuables.
    Removed object detection is triggered when an object is  removed from the detection area for a specified duration.
    Background Video Generated
    Moving object enters/leaves area.
    Change in Designated Area Analysis Moving Object Detected Detection begins when a 
    moving object enters the 
    designated area.Detected
    Background Video Generated
    Object abandoned.
    Change in Designated Area Analysis Abandoned Object Detected The object is abandoned 
    and detection begins after 
    specified duration.Detected
    Background Video Generated
    Removing an object
    Change in Designated Area Analysis Object Removal Detected The picture (object) is 
    removed and detection 
    begins after a specified 
    duration.
    Detected 
    						
    							212
    Camera Tampering Detection
    Detect when capture is being disrupted. This can be used to detect when the camera orientation is changed or the 
    video display is obscured with spray, etc. Camera ta mpering detection is triggered when an area exceeding a 
    specified ratio of change is continuously altered.
    Passing Detection
    Detect when a person or moving  object crosses a specified line.
    This determines that an object is passing when the decisi on point of the object detection frame crosses a detection 
    line.
    Background Video 
    Generated
    Tampering
    Video Changes Analysis Camera Tampering  Detected
    Detection begins when the ratio 
    of change in a video exceeds a 
    specified amount.
    Detected
    Background Video 
    Generated
    Passing
    Video Changes AnalysisPassing Detected
    Detection begins when the 
    decision point crosses the 
    specified detection line.
    Detected
    Decision PointDetection 
    Frame 
    						
    							Admin Tools
    6
    213
    Intrusion Detection
    Detect when a person or moving object crosses a specified area. This can be used to detect actions such as when 
    someone climbs over a barrier and enters a restricted area in  a museum, etc. This determines that an object is entering 
    when the decision point of the object detection frame enters the detection area and the specified duration has elapsed.
     Auto Tracking
    The camera automatically tracks an object when it is detect ed moving in a detection area. This allows monitoring 
    movement, such as of suspicious persons.
     Audio Detection
    Detects audio input to the camera. There are 2 types of detection.
    These are set with [Event] > [Audio Detection] (P. 107) on t he Setting Page, not with the Intelligent Function Setting 
    Tool.
    [Volume Detection]:  Detects when volume level exceeds or falls below a reference volume.
    [ Scream Detection]:  Detects screams or cries from people.
    Notes on Intelligent Function Settings and Operations
     When setting the Intelligent Function, do an actual detect ion/tracking test to confirm that detection will be performed 
    correctly.
     If a sudden change in lightness or darkne ss occurs within the entire screen, proper detection may not be possible for up 
    to five minutes. When tracking, the effect will be  visible as soon as there is change in the scene.
     When the image is zoomed in (telephoto), de tection/tracking may not work as expected.
     Detection/tracking will not be performed wh ile the Intelligent Function is restarting.
    Background Video 
    Generated
    Intrusion
    Video Changes Analysis Intrusion  DetectedDetection begins when the 
    decision point enters the 
    detection area.Detected
    DecisionPoint
    Detection 
    Frame
    R11R10
    Background Video 
    Generated
    Video Changes Analysis Auto Tracking
    Tracking
    R11M
    641M741 
    						
    							214
    • If the camera is operated while configuring or using the Intelligent Functio n, [Restarting intelligent function. Please wait.] 
    is shown and the Intellige nt Function will restart.
     If the display switches between Day mode and Night mode, [R estarting intelligent function. Please wait.] is shown and 
    intelligent function will restart.
     If [Basic Settings] > [Video Se ttings] > [All Videos] > [Video Size Set] setti ngs on the Setting Page are changed, be sure 
    to change the preset position settings (only for the VB-R 11VE/VB-R11/VB-R10VE) and Intelligent Function settings, and 
    check operations. The Intelligent Function ma y not operate, depending on the settings.
     Set the Intelligent Function again if the  angle of view is changed through camera  operation, or the camera position of a 
    preset or home position is changed.
     If [Status] in [Detection Setting List] is [Enabled] when the cam era position is fixed, control privileges cannot be obtained 
    by VB Viewer or RM. Also, the preset tour will no longer run.
     Difficult-to-Detect Subjects
    The following subjects may not be detected/tracked,  or may result in erroneous detection/tracking.
     Objects or areas where there is little contrast in colo r or brightness with the background may not be detected/ 
    tracked.
     Small objects and changes on the screen may not be detected/tracked.
     Partial or entire changes in brightness  on the screen may trigger detection/tracking.
     When there are multiple overlapping ob jects, there may be a change in detection. For example, objects passing 
    may either not be detected or the timing of detection may be incorrect.
     When there are large numbers of obje cts in the scene, objects may not be properly detected/tracked.
     Objects with little movement may not be tracked.
     Objects directly below the camera  may take time to be tracked.
     Areas with bright reflections or selected areas that ar e very bright, can result in an object not probably being 
    tracked.
    Pre-register Presets  
    It is strongly recommended that you register the camera angle as a preset  in advance and lock the camera to that position 
    when using video detection. It is also recommended that the fiel d of view that captures targeted objects at a larger ratio be 
    used.
    For details on preset registration, please refer to “Register Presets” (P. 170).
    Select the Intelligent  Function Operation Mode  
    Video detection and auto tracking  cannot be used simultaneously. When you la unch the Intelligent Function Setting Tool, 
    you can select which one to use.
    Note
    The detection condition settings are retai ned even if you change operation modes.
    R11R10
    R11R10
    R11R10
    1Launch the Intelligent Function Setting Tool (P. 193).
    2Select [Video Detection] or [Auto Tracking] and click [OK]. 
    						
    							Admin Tools
    6
    215
    A confirmation screen appears.
    [Video Detection]
    When you click [Yes], the Intelligent Function Setting Tool launches with its [Lock camera position] selected. If 
    you click [No], select [Lock camera position] after video detection launches.
    [Auto Tracking]
    If you click [Yes], you will obtain camera control and can configure Auto Tracking settings. If you click [No], 
    obtain camera control after Auto Tracking launches and configure Auto Tracking settings.
    When [Video Detection] is sel ected, please refer to “Intelligent Function Setting Tool - Video Detection -” (P. 216) 
    to configure video detection settings.
    When [Auto Tracking] is selected, please refer to “Intellige nt Function Setting Tool  - Auto Tracking -” (P. 230) to 
    configure Auto Tracking settings.
    Important
    [Video Detection] and [Motion Detection] are exclusive of each ot her. Only the selected mode operates, the other is disabled.
    The settings of the disabled operation mode, however, are reta ined (except the camera angle) and used if the mode is enabled 
    again later.
    3Set the Selected Operation Mode 
    						
    							216
    In video detection, select the type to detect, and set the tracking area for video changes while checking images on the 
    camera. You should also set which operati ons (e-mail notification, record video, playing audio from the speaker connected 
    to the camera) should be carried  out when changes are detected.
    Steps for Configuring Video Detection
    The following are the basic steps for configuring video detection.  For details on settings for each type of detection, please 
    refer to “Configure Detection Criteria  ([Detection Criteria] Tab)” (P. 219).
    For details on how to adjust presets, please refer to “Register Presets” (P. 170).
    Note
    You can select presets that meet the following conditions.
    Intelligent Function Setting Tool
     - Video Detection -
    R11R10
    M 641M 640M741M740
    1Select [Lock camera position] in [Camera Position  Settings], then select a preset. R11R10 
    						
    							Admin Tools
    6
    217
    – Presets configured within the view restrictions.
    – Presets with pan, tilt and zoom setting values (no empty entries) configured in the [Preset Registration] tab. (P. 171)
    Note
    You can register up to 15 detection settings.
    The added detection setting will appear in the [Detection Setting List] and [Detect Criteria] tab.
    To disable detection settings, clear this check box.
    2Click [Add] in [Detection  Setting List].
    3Select [Detection Setting Number] (1 to 15) and [Detection Type] for the detection setting to be added.
    4Click [OK].
    5Select [Enable these detection settings]. 
    						
    							218
    Set criteria in the video display area or [Detection Criteria] tab (P. 219). The detection criteria differ according to 
    the detection type.
    Set which operations to carry out for vi deo detection in the [Event] tab (P. 227).
    The settings are saved to the camera.
    Note
    To restore settings, click [Restore Settings] before saving. Thi s discards the settings you have specified and restores the settings 
    saved in the camera.
    6Configure the detection criteria.
    7Configure event settings.
    8Click [ Save settings].
    9To register multiple detecti on settings, repeat steps 2 to 8. 
    						
    							Admin Tools
    6
    219
    You can check the detection status of the specified detection settings in video display area and the event display 
    panel (P. 234).
    Configure Detection Criteria  ([Detection Criteria] Tab)
    Detection criteria is controlled  and set in the video display area  for each type of detection. 
    Settings Common to Each Detection Type
    (1) [Detection  Settings Name]
    Enter a detection name of 64 characters or less. Be  sure to enter a name in [Detection Settings Name].
    (2) [Area  Shape]
    Configure whether the detection area is  a rectangle or a free-shape polygon.
    Note
    You cannot select [Area Shape] for camera tampering detection.
    Use [Rectangular]
    Configure the detection area by moving, resizing or changing the shape of the rect angle that appears in the 
    video display area.
    Drag the area to move it, and drag the vertices to resize it.
    Use [Polygonal]
    Click the video display area to place a vertex for the polygon at the clicked position.
    Place the vertices in order, then either  click the first vertex again or double-c lick the last vertex to set the polygon 
    detection area.
    10Check the detection result.
    Important
    It is recommended that you configure the detection criteria in cond itions as close as possible to the actual conditions in which you will 
    use the camera.
    (1)
    (2)
    (3) 
    						
    							220
    Drag the area to move it, and drag the vertices to resize it.
    You can specify polygonal areas with a maximum of 32 vertices.
    Note
    If you change the shape of a detection area  you have already configured, the area is deleted and you switch to configuring a ne w 
    area.
    [Clear]
    The detection area configured with [Polygonal] is deleted.
    (3) [Display Color] Select the color for detection areas and detection lines.
    How to Configure Moving Object Detection
    Set the area you want to detect a mo ving object in as a detection area.
    This determines how large the moving ob ject must be in relation to the detection area you set in step 2 for motion 
    detection to be triggered.
    When the setting values or slider is  changed, an indicator frame representing the object size is displayed for one 
    second in the center of the video display area allowing y ou to check the size ratio while specifying the setting.
    1Select [Rectangular] or [Polygonal].
    2Use the video display area to configure the area where you would like to detect moving objects (P. 219).
    3Configure the size of the object needed for triggering detection in [Object Size (%)].
    Object  Size Indicator
    Detection Area 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon network camera VBM741 LE User Manual