Home > Canon > Camera > Canon network camera VBR13 User Manual

Canon network camera VBR13 User Manual

Here you can view all the pages of manual Canon network camera VBR13 User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.

Page 101

Setting Page
5
101
The order of the list can be changed with the ▲▼ buttons on the right.
To delete an authorized user from the list, select the user and click [Delete].
User Authority
Set the privileges for authorized users an d guest users. This setting enables you to  set access restrictions for the Camera 
Viewer (P. 55).
[Privileged Camera Control], [Cam era Control], [Video Distribution]
[Audio Distribution]
Select the items for granting users privileges.
An authorized user has higher  privileges...

Page 102

102
Camera date and time settings.
Current Date and Time
The date and time set in the camera are shown.
Setting
Set the date and time setting method, time zone and daylight  saving time for the camera.
[Setting Method]
Select the date and time setting method.
The settings are configured as follows depending  on the setting configured in [Setting Method].
[Set manually]
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format  in  order.
[Synchronize with NTP server]
Select the...

Page 103

Setting Page
5
103
Note
 If the NTP server IP address is incorrect or a connection with the NTP server cannot  otherwise be established, the date and time will not 
be changed.
 The NTP server query interval  is 300 seconds. Synchronization will  take time if there is a large difference between the time o f the camera 
and the time of the NTP server.
[Time Zone]
Select the appropriate time zone.
If the time zone is changed, the date and time display will  update automatically according to the specified...

Page 104

104
General video settings, such as the size and quality of JPEG and H.264 video transmitted from the camera.
[Video] is common with [Video] found in  [Video and Audio] and [Video Record]. A setting configu red in any of the [Video] 
submenus will be reflected in the other [Video] submenus as well.
All Videos
Set the video size sets used by the camera.
All options in the [Video] submenu and the size sets that can  be selected in [Video Size] in all of the Setting Pages are 
determined by the video size...

Page 105

Setting Page
5
105
JPEG
You can configure settings for the quality and size of JPEG video transmitted from the camera, as well as, the video size 
when recording the camera video.
The video sizes that can be set or selected  depend on the [Video Size Set] setting.
[Video Quality]
Select the video quality transmitted from the camera for each size in a video size set.
Greater values have higher quality.
[Video Quality: Digital PTZ]
Select the video quality for digital PTZ.
[Video Size: vi deo...

Page 106

106
[Frame Rate (fps)]
Select the video frame rate.
[I Frame Interval (sec)]
Select the I frame interval (sec) for H.264 video.
H.264(2)
Settings for H.264(2) video transmitted from the camera.
The video sizes that can be selected depend on the [Video Size Set] setting.
[H.264(2)]
Select [Enable] to dual  stream H.264 video.
[Video Size], [Bit Rate  Control], [Target Bit Rate (kbps)], [Video Quality], [Frame Rate (fps)], [I Frame Interval (sec)]
Please refer to each setting in “H.264(1)”.
Important
 When...

Page 107

Setting Page
5
107
Configure the startup, authorization, and view of the Viewer.
General
[Default Page]
Sets the Setting Page or the Viewer as the first page to display when the camera is connected.
If users other than the administrator use the Viewer, set [Default Page] to [Display Viewer].
Viewer Settings
[User Authentication]
Displays the user authent ication screen when the camera is  connected to the Viewer (P. 53). If you select [Authenticate], 
only the administrator or an authorized user (P. 100)...

Page 108

108
Settings for the camera name and external input/output devices, and for camera use and installation settings.
Camera Name
Set the camera name.
[Camera Name]
Enter any camera name. Be sure to enter a name in [Camera Name (alphanumeric characters)].
Camera Control
Set various controls for easier viewing of video.
[Digital Zoom]
Select this to enable or disable digital zoom.
If [Enable] is selected, the area indicating digital zoom will be displayed next to the zoom slider in the Viewer (P. 68).
Unlike...

Page 109

Setting Page
5
109
If there is still blur after selecting [On1], select [On2].
The angle of view will be narrower and video noisier when using the Image Stabilizer, compared to when it is not used.
[Smart Shade Control Strength (Auto)]
Select the control strength when [Smart Shade Control] (P. 116) is set to [Auto].
 [Mild]: Select if noise is noticeable.
 [Medium]: Recommended  setting for Auto mode (default setting).
 [Strong]: Select to increase visibility in dark areas.
[Haze Compensation  Strength...

Page 110

110
Note
If you set Auto Flip to [Enable], some of the settings in [Restrict View] are disabled (P. 128).
If tracking a subject that passes directly under a ceiling mounted  camera (tilt angle 90°), the video will flip as the tilt angle 
nears 100° without the subject appearing inverted.
Day/Night (When Auto Is Set)
Set conditions for switching Day Mode and Nigh t Mode when [Day/Night] is set to [Auto].
[Switching Brightness]
Select the brightness for switching Day/Nigh t Mode when [Day/Night] is set to...
Start reading Canon network camera VBR13 User Manual

Related Manuals for Canon network camera VBR13 User Manual

All Canon manuals