Home > Canon > Camera > Canon network camera VBS805D User Manual

Canon network camera VBS805D User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon network camera VBS805D User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Chapter 4
    Admin Tools
    ❏Privacy Mask Setting
    ❏Panorama Image Registration 
     
    ❏View Restriction Setting  
    ❏Camera Preset Setting
    ❏Intelligent Function Setting
    ❏Viewing Logs
    ❏Managing Memory Card Video 
    						
    							82
    Admin Tools consists of applications for remotely making camera settings, checking operating conditions, and acquiring logs.
    Admin Tools
    This is the top page of Admin Tools. All tools can be 
    launched from this page. 
    Privacy Mask Setting Tool
    A tool that lets you hide areas you do not want to be seen 
    by setting privacy masks. Up to eight areas can be 
    masked, allowing thorough protection of privacy. 
    Panorama Creation Tool 
    A panorama image creation tool that shows the entire 
    area that can be captured by this camera. Once a 
    panorama image is captured and registered, it is shown in 
    the panorama display panel of the viewer. As the 
    panorama image is also shown when view restrictions and 
    presets are set, you can see at a glance which part of the 
    entire area the set area is occupying.
    View Restriction Setting Tool
     
    The View Restriction Tool restricts the viewable capture 
    range in the VB Viewer. You can set the desired range 
    with the mouse by referring to the preview in panorama 
    mode. 
    Admin Tools Overview
    (p. 84)
    (p. 85)
    (p. 89)
    (p. 92) 
    						
    							Admin Tools Overview
    83
    4
    Admin Tools
    Preset Setting Tool
    A tool that lets you set presets and the home position 
    visually. You can make the desired settings with the 
    mouse by referring to the preview in panorama or full 
    video mode.
    Intelligent Function Setting Tool
    This tool is used to set intelligent functions that perform 
    uploads, notify the viewer, record a log, etc., if a change 
    has occurred in the captured video due to movement of a 
    subject. By setting the conditions, you can let the camera 
    detect events such as “moving object”, “abandoned 
    object”, “removed object”, “camera tampering”, 
    “passing”. You can view the video on the camera while 
    setting the position and size of the detection area and line, 
    detection conditions, etc. 
    Log Viewer
    This viewer shows the logs of operating conditions of the 
    camera. 
    Recorded Video Utility
    This is a utility for browsing and managing video recorded 
    on memory cards inserted in the camera. You can display 
    a list of recorded video, play it back, delete it and 
    download it.
    (p. 96)
    (p. 103)
    (p. 115)
    (p. 118) 
    						
    							84
    Launching the Admin Tools
    The Admin Tools can be launched from the top page of 
    the camera.
    A user authentication window appears.
    The Admin Tools top page will appear.
    (1) [Admin Viewer] 
    Click to launch Admin Viewer.
    (2) [Setting Page] 
    Click to launch Setting Menu.
    (3) [Back to top] 
    Click this button to navigate to the top page. 
    (4) [Admin Tools] 
    Click the buttons of any tool to launch Admin Tools.
    Note
     The first time you launch any of the Admin Tools, wait about 5 
    to 10 seconds until the software is downloaded to your 
    computer. From then on, launching will be quicker. Also, when 
    accessing via SSL encrypted communication, download time 
    will take longer (about 20 to 30 seconds). 
     None of the following tools can be launched concurrently: 
    Privacy Mask Setting Tool, Panorama Creation Tool, View 
    Restriction Setting Tool, Preset Setting Tool and Intelligent 
    Function Setting Tool. In environments without a proxy server, select [Internet 
    options] > [Connections] tab > [LAN settings] and clear the 
    [Automatically detect settings] checkbox in Internet Explorer. 
     Any of the Admin Tools can also be launched from the Camera 
    Management Tool. For details, please refer to the “Camera 
    Management Tool User Manual”.
    Accessing the Admin Tools
    1Start the top page of the camera (p. 31).
    2Click [Admin Tools].
    3Enter a user name and password and click [OK] 
    (p. 31).
    Important
    The Admin Tools Certificate must be installed on any computers 
    using [Admin Tools]. (p. 26)
    (1) (2)(3)
    (4) 
    						
    							85
    Admin Tools
    4
    A tool that lets you cover certain areas on the camera video with privacy masks.
    When the camera is panned, tilted, or zoomed, the privacy mask area responds to the camera video. 
    Display Screen of Privacy Mask Setting Tool
    (1) Video Display Area
    The video currently captured by the camera is shown. 
    Privacy masks can be resized/moved in the video 
    display area. 
    Pan, tilt, and zoom operations are the same as in the 
    Admin Viewer. For details, see “How to Operate the 
    Viewer” (p. 129).
    (2) [Switch Mouse Operation] button
    Each time this button is clicked, the button switches 
    between   and  , and the mouse operation in the 
    video display area changes.
    When the button is set to  , privacy masks can be 
    resized/moved. While in this mode, the camera 
    orientation will not change.When the button is set to  , pan/tilt operations can 
    be performed.
    (3) [Switch Screen Size] button
    Each time this button is clicked, the screen size of the 
    video display area switches between “480 x 270” and 
    “960 x 540”.
    (4) [BLC] (Back Light Compensation) button
    This button turns on/off backlight compensation. This 
    control is effective when the video is dark due to 
    backlight. 
    (5) [Obtain/Release Camera Control] button
    This button is used to obtain/release the camera 
    control privileges. For details, see “Obtaining Camera 
    Control Privileges” (p. 131). If camera control 
    privileges have not yet been obtained elsewhere, 
    Privacy Mask Setting Tool
    You can set privacy masks 
    for up to eight areas while 
    checking the video on the 
    camera. 
    (1)
    (5) (6) (15) (16)(4)(14)-1
    (14)-2
    (14)-3
    (14)-4
    (14)-5 (14) (13)(12) (3) (2) (7)
    (10)
    (11) (8)
    (9) 
    						
    							86
    such as in the Admin Viewer, the control privileges will 
    be obtained the moment the Privacy Mask Setting 
    Tool is launched.
    (6) [Control for Admin] button
    Displays the Control for Admin Panel (p. 123).
    (7) Registered Privacy Mask Display Area (Capture area)
    You can check the settings for the area where the 
    camera can physically capture privacy masks.
     
    Even if a panorama image is saved in the camera, it 
    will not be displayed here. 
    (8) [Registered Privacy Masks] 
    Show the number of registered privacy masks. You 
    can set up to eight privacy masks. 
    (9) [Next] 
    When multiple privacy masks are set, clicking this 
    button switches to the privacy mask selected. 
    (10)[Color] 
    Choose the color for the privacy mask area. All 
    privacy mask areas are set to the selected color.
    (11)[Quick add] 
    Add a privacy mask area and save it in the camera. 
    (12)[Quick change] 
    Change a privacy mask area and save it in the 
    camera. 
    (13)[Delete] 
    Delete the privacy mask area selected from the 
    camera. 
    (14)[Detailed Settings] 
    Show the detailed settings. 
    (14)-1 [Enable privacy mask] checkbox
    Select the checkbox if you want to enable the 
    selected privacy mask area settings.
     (14)-2 [Pan], [Tilt], [Zoom]  
    You can specify values for each camera angle.
     (14)-3  [Get camera position]
     
    Load the current camera angle. Load the pan, tilt, 
    and zoom settings of the camera and show them in 
    (14)-2.
    (14)-4 [Privacy Mask Position and Size]
    Set left and upper edge, width, and height of the 
    privacy mask. 
    (14)-5 [Preview settings] 
    The settings will be reflected in the video display 
    area and in the registered privacy mask display 
    area (capture area).
    (15)[Restore settings] 
    Clear the settings you have specified on the screen of 
    the tool and restore the settings saved in the camera. (16)[Save settings] 
    Save the privacy mask settings specified under 
    [Detailed Settings] in the camera.
    Setting the Privacy Mask Area
    Set the privacy mask area while checking the video on the 
    camera.
    A preview frame showing the privacy mask area is 
    shown in the video display area. 
    If you want to change the size, drag the square 
    markers (■) positioned at the four sides of the preview 
    frame. Drag from inside the frame to move the privacy 
    mask area. 
    If you want to cancel the changes and restore the 
    settings saved in the camera, click [Restore settings].
    The set privacy mask area is saved in the camera. 
    You can set up to eight privacy masks. Repeat the 
    setting operations to set multiple privacy mask areas. 
    Saved privacy mask areas are shown in the video 
    display area and registered privacy mask display 
    area (capture area).
    1If you have not yet obtained the camera control 
    privileges, click the [Obtain/Release Camera Control] 
    button and obtain the control privileges. 
    2Set the position and size of the privacy mask area. 
    3Click [Quick add] to save the privacy mask area.
    4Confirm privacy mask areas.  
    						
    							Privacy Mask Setting Tool
    87
    4
    Admin Tools
     
     
    (1) Privacy Mask Area
    Enabled privacy mask areas are shown filled with 
    color. Disabled privacy mask areas are just shown 
    in a frame. 
    (2) View Restriction Area
    This is the area set with the View Restriction Setting 
    Tool.
    (3) Privacy Mask Area
    Privacy masks for which the [Enable privacy mask] 
    checkbox is selected are shown filled with color. 
    Privacy masks that are not selected are shown in a 
    hatched frame.
    (4) Maximum Wide-angle Area
    This is the visible area when the camera is at 
    maximum wide-angle. This area is only shown 
    when a privacy mask area (3) is being dragged. 
    (1) (2) (3) (4)
    (1) (3)
    Important
     The privacy mask areas are also part of the intelligent 
    function detection area. Subject movement may be seen.
     Privacy masks are applied to all video transmitted from the 
    camera (live video, uploaded video, recorded video, video 
    recorded to a memory card).
     Check privacy mask settings again if the [Video] > [Video 
    Size Set] settings on the Setting page have been changed.
     The privacy mask function is not available in the following 
    situations:
    – While the camera is starting up after being turned on
    –    For the video display area in [Setting 
    Page] > [Camera Angle]
    –    While a panorama image is being created
     The position of the privacy mask will need to be set again if 
    the image flip setting is changed.
     
     Set the privacy mask area to a somewhat larger size than the 
    area you want to hide. Also, be sure to confirm that after 
    setting a privacy mask, the area you want to hide does not 
    become visible when the camera direction is altered by pan, 
    tilt, or zoom operations. 
     If the privacy mask settings were changed after a panorama 
    image was saved using the Panorama Creation Tool, the 
    panorama image must be recreated using the Panorama 
    Creation Tool.
     
     Privacy masks may deviate slightly from their specified 
    positions depending on the zoom position.
     You can set privacy masks for optical zoom areas only. 
    Privacy mask areas cannot be set in digital zoom areas. 
    						
    							88
    Changing/Deleting a Privacy Mask Area
    How to Change
    Click the privacy mask area you want to change in the 
    registered privacy mask display area (capture area) 
    or select a privacy mask area by clicking [Next].
    Privacy mask areas can be changed using the mouse 
    or by entering values. 
    Entering values
    Click [Detailed Settings]. 
    Enter a value for the [Privacy Mask Position and Size] 
    and click [Preview settings] to check the position and 
    size of the preview frame. 
    Click [Get camera position] to load the current pan, 
    tilt, and zoom settings.
    If you want to cancel the changes and restore the 
    settings saved in the camera, click [Restore settings].The changed privacy mask area is saved in the 
    camera. 
    Note
    Select a disabled privacy mask and click [Quick change] to 
    enable it.
    How to Delete
    Select the privacy mask area you want to delete and click 
    [Delete]. 
    The privacy mask area that was saved in the camera is 
    deleted. 
    1Select the privacy mask area you want to change.
    2Change the position and size of the privacy mask area. 
    3Click [Quick change] or [Save settings] to save the 
    privacy mask area. 
    						
    							89
    Admin Tools
    4
    A panorama image capture/creation tool that shows the entire area that can be captured by this camera. When performing 
    pan, tilt, or zoom operations, setting presets using the viewer, etc., you can see at a glance which part of the entire area the 
    set area is occupying.
      Admin Viewer                                 Preset Setting Tool 
    Panorama Creation Tool  
    Important
    If the privacy mask settings were changed using the Privacy Mask Setting Tool, it is 
    recommended that you recreate the panorama image to reflect the new privacy mask 
    settings in the panorama image. 
    Create/capture a panorama image with the Panorama Creation Tool and save 
    it in the camera. 
    You can see at a glance which 
    part of the entire area the 
    displayed area is occupying. 
    						
    							90
    Display Screens of Panorama Creation Tool
    (1) [Load from camera] 
    Show the panorama image saved in the camera. 
    (2) [Save to camera] 
    Save the currently shown panorama image in the 
    camera. 
    (3) [Load from file] 
    Show JPEG files as a panorama image. 
    (4) [Save to file] 
    Save the currently shown panorama image as a JPEG 
    file. 
    (5) Creation date and time
    Show the date and time a panorama image was 
    captured or loaded from a JPEG file. 
    (6) [Clear] 
    Delete the currently shown panorama image. 
    (7) Panorama Image Display Area
    Show the panorama image. 
    (8) [Cancel] 
    Stop the capture of a panorama image. 
    (9) [Start Panorama Creation] 
    Start capturing a panorama image. 
    (10)[Finish Panorama Creation]
    Confirm the captured panorama image. 
    (11)Status Display
    Show the panorama image capturing status, such as 
    [Capturing images...], etc. 
    (12)[Exposure Lock] 
    Select [Center] or [Current Position] for the auto 
    exposure lock position.
    (13)[White Balance Lock] 
    Set the white balance to [Do not lock], [Center], or 
    [Current Position]. 
    (14)[Focus Lock] 
    Set the focus to [Do not lock], [Center], or [Current 
    Position]. Capturing a Panorama Image
    The capture is started. 
    Change the settings beforehand for [Exposure Lock], 
    [White Balance Lock], and [Focus Lock] (VB-S30D 
    only) as necessary.
    To stop the capture when underway, click [Cancel].
    When you position the mouse pointer over the 
    panorama image, a white grid is shown. If you want to 
    recapture part of the panorama, position the pointer 
    inside the grid, right-click and select [Recapture]. 
    To recapture an entire panorama image, click [Start 
    Panorama Creation] again.
    Note
     The following users will be disconnected while creating a 
    panorama image.
    - All users except for administrators
    (1)
    (5)
    (6)
    (7)
    (8)
    (11)
    (9) (10)(14) (2) (3) (4)
    (12)
    (13)
    1Click [Start Panorama Creation]. 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon network camera VBS805D User Manual