Canon printer FAXPHONE L100 User Manual
Here you can view all the pages of manual Canon printer FAXPHONE L100 User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
21 Basic Operation7 Adjust the paper guide tightly to the length of the paper. IMPORTANTIMPORTANT If the paper guides are too loose or too tight, this may result in misfeeds or paper jams. 8 Close the dust cover. 9 Specify the loaded paper size and type (→p.23).
Page 22
22 Loading Envelopes or Paper with a Letterhead This section describes how to load envelopes and paper with a letterhead. Envelopes Loading orientation Load the paper properly by following the instructions below. Paper with a Letterhead or Logo Before Loading Loading Orientation Load the envelopes with the fl aps face up. Flatten envelopes to release any remaining air. Loosen any stiff corners of the envelopes, and fl atten any curls, as shown in the fi gure. Envelope No.10, DL, ISO-C5...
Page 23
![Page 23
23
Basic Operation Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Paper>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲] or...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-22.png "Page 23
23
Basic Operation Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Paper>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲] or...")
23 Basic Operation Setting a Paper Size and Type Make sure that the Paper Settings match the size and the type of the loaded paper. 1 Press [ ] (Paper Settings). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK]. • To specify the paper size manually, select < Custom Paper>, and then refer to “Specify a Paper Size Manually” at the bottom of this page to specify the size. Paper Size LTR LGL STMT EXEC 4 Press [▲] or...
Page 24
![Page 24
24
Switch to the Sleep Mode
You can switch to and cancel the Sleep mode easily, by press [ ] (Energy Saver).
When the Processing/Data indicator is lit or blinking, the machine will not enter the
Sleep mode, because an operation is in progress or an error has occurred.
By default, the machine automatically enters the Sleep mode if you do not
perform any functions for 10 minutes. To change this setting, press [
]
(Menu) , and then specify a time.
Use the Toner Saver Mode
You can set...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-23.png "Page 24
24
Switch to the Sleep Mode
You can switch to and cancel the Sleep mode easily, by press [ ] (Energy Saver).
When the Processing/Data indicator is lit or blinking, the machine will not enter the
Sleep mode, because an operation is in progress or an error has occurred.
By default, the machine automatically enters the Sleep mode if you do not
perform any functions for 10 minutes. To change this setting, press [
]
(Menu) , and then specify a time.
Use the Toner Saver Mode
You can set...")
24 Switch to the Sleep Mode You can switch to and cancel the Sleep mode easily, by press [ ] (Energy Saver). When the Processing/Data indicator is lit or blinking, the machine will not enter the Sleep mode, because an operation is in progress or an error has occurred. By default, the machine automatically enters the Sleep mode if you do not perform any functions for 10 minutes. To change this setting, press [ ] (Menu) , and then specify a time. Use the Toner Saver Mode You can set...
Page 25
![Page 25
25
Make a Basic Copy ………………………………………………\
…… 26
Enlarge or Reduce Copies …………………………………………… 27
Adjust the Image Quality for Copy …………………………………… 27Adjusting the density ………………………………………………\
27
Se lec
ting the Document Type ……………………………………… 28
View and Cancel Copy Jobs ………………………………………… 28
C h
ange the Default Copy Settings …………………………………… 29
Copy
This chapter describes basic copy functions.](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-24.png "Page 25
25
Make a Basic Copy ………………………………………………\
…… 26
Enlarge or Reduce Copies …………………………………………… 27
Adjust the Image Quality for Copy …………………………………… 27Adjusting the density ………………………………………………\
27
Se lec
ting the Document Type ……………………………………… 28
View and Cancel Copy Jobs ………………………………………… 28
C h
ange the Default Copy Settings …………………………………… 29
Copy
This chapter describes basic copy functions.")
25 Make a Basic Copy ………………………………………………\ …… 26 Enlarge or Reduce Copies …………………………………………… 27 Adjust the Image Quality for Copy …………………………………… 27Adjusting the density ………………………………………………\ 27 Se lec ting the Document Type ……………………………………… 28 View and Cancel Copy Jobs ………………………………………… 28 C h ange the Default Copy Settings …………………………………… 29 Copy This chapter describes basic copy functions.
Page 26
![Page 26
26
Make a Basic Copy
1 Place documents (→p.16).
Place documents face down.
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.13).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
/ ...
Copy Ratio: 100%
1
+
-
01
4 Press [ ] (Start).
Canceling Copy Jobs
Press...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-25.png "Page 26
26
Make a Basic Copy
1 Place documents (→p.16).
Place documents face down.
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.13).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
/ ...
Copy Ratio: 100%
1
+
-
01
4 Press [ ] (Start).
Canceling Copy Jobs
Press...")
26 Make a Basic Copy 1 Place documents (→p.16). Place documents face down. IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in misfeeds or paper jams. 2 Switch to the Copy mode (→p.13). 3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.• Press [ ] (Clear) to delete the entered copy quantity. Copy: Press Start 100% LTR Density: 0 Original Type: Text / ... Copy Ratio: 100% 1 + - 01 4 Press [ ] (Start). Canceling Copy Jobs Press...
Page 27
![Page 27
27
Copy
Enlarge or Reduce Copies
Enlarge or reduce copies using custom copy ratios.
1 Place documents (→p.16).
2 Switch to the Copy mode (→p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press the numeric keys to specify the ratio.
Custom Ratio
100 %
(50-200)
5 Press [ ] (Start).
Adjust the Image Quality for Copy
Relation between the density and document type:
If < Densit y> i
s set to , will be changed
to < Te x t >.
Adjusting the density
You can make the density...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-26.png "Page 27
27
Copy
Enlarge or Reduce Copies
Enlarge or reduce copies using custom copy ratios.
1 Place documents (→p.16).
2 Switch to the Copy mode (→p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press the numeric keys to specify the ratio.
Custom Ratio
100 %
(50-200)
5 Press [ ] (Start).
Adjust the Image Quality for Copy
Relation between the density and document type:
If < Densit y> i
s set to , will be changed
to < Te x t >.
Adjusting the density
You can make the density...")
27 Copy Enlarge or Reduce Copies Enlarge or reduce copies using custom copy ratios. 1 Place documents (→p.16). 2 Switch to the Copy mode (→p.13). 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Press the numeric keys to specify the ratio. Custom Ratio 100 % (50-200) 5 Press [ ] (Start). Adjust the Image Quality for Copy Relation between the density and document type: If < Densit y> i s set to , will be changed to < Te x t >. Adjusting the density You can make the density...
Page 28
![Page 28
28
Selecting the Document Type
Select the appropriate document type.
1 Place documents (→p.16).
2 Switch to the Copy mode (→ p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
Best suited for text-only documents.
Suited for documents that contain text and photos.
Suited for documents that contain large photos.
5 Press [ ] (Start).
View and Cancel Copy Jobs
You can view or cancel copy jobs while the...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-27.png "Page 28
28
Selecting the Document Type
Select the appropriate document type.
1 Place documents (→p.16).
2 Switch to the Copy mode (→ p.13).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the appropriate document type, and then
press [OK].
Best suited for text-only documents.
Suited for documents that contain text and photos.
Suited for documents that contain large photos.
5 Press [ ] (Start).
View and Cancel Copy Jobs
You can view or cancel copy jobs while the...")
28 Selecting the Document Type Select the appropriate document type. 1 Place documents (→p.16). 2 Switch to the Copy mode (→ p.13). 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Press [▲] or [▼] to highlight the appropriate document type, and then press [OK]. Best suited for text-only documents. Suited for documents that contain text and photos. Suited for documents that contain large photos. 5 Press [ ] (Start). View and Cancel Copy Jobs You can view or cancel copy jobs while the...
Page 29
![Page 29
29
Copy
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted or
[
] (Reset) is pressed.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the desired option, and then press [OK].
Select the copy quantity.
Make the density lighter or darker.
Select the quality of image.
Select the copy ratio.
5 Specify the desired...](http://img.usermanuals.tech/thumb/14/920/w300_printer-faxphone-l100-1478268361_d-28.png "Page 29
29
Copy
Change the Default Copy Settings
You can change the default copy settings that are applied when the machine is restarted or
[
] (Reset) is pressed.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight the desired option, and then press [OK].
Select the copy quantity.
Make the density lighter or darker.
Select the quality of image.
Select the copy ratio.
5 Specify the desired...")
29 Copy Change the Default Copy Settings You can change the default copy settings that are applied when the machine is restarted or [ ] (Reset) is pressed. 1 Press [ ] (Menu). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight , and then press [OK]. 4 Press [▲] or [▼] to highlight the desired option, and then press [OK]. Select the copy quantity. Make the density lighter or darker. Select the quality of image. Select the copy ratio. 5 Specify the desired...
Page 30
30 Memo