Canon printer imageCLASS MF4770n User Manual

31
Copy
Copy by Saving Paper
You can save paper with [  ] (Paper Save Copy) when making a copy.
1 Place your documents (→p.19)
2 Press [  ] (Paper Save Copy).
3 Press [▲] or [▼] to highlight the desired dcombination option, and then 
press [OK].
* Copy two pages onto each of both sides of paper.
* Copy four pages onto each of both sides of paper.
 Copy two pages onto one side of each paper..
 Copy four pages onto one side of each paper.
* MF4890dw/MF4880dw only
4 Press [▲] or [▼] to highlight the...

32
 
 Adjust the Image Quality for Copy 
Relation between the density and document type:
If  i
 s set to ,   will be changed 
to < Te x t >.  
 Adjusting the density 
You can make the density brighter or darker than the original documents.
1 Place your documents (→p.19).
2 Switch to the Copy mode (→p.16).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [◄] or [►] to adjust the density , and then press [OK].
• 
Select < Auto Density > to use the density that is most suitable for the...

33
Copy
Adjusting the sharpness
You can sharpen or soften the edges of images by adjusting the sharpness.
1 Place your documents (→p.19).
2 Switch to the Copy mode (→p.16).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [◄] or [►] to adjust the sharpness, and then press [OK].
 
Sharpness
 -                +– :  Less sharpness(Suitable for photos)
+ :  More sharpness (Suitable for documents written in pen or 
pencil)
5 Press [  ] (Start). 

34
 Make Double-Sided Copies
(MF4890dw/MF4880dw Only)
 You can make double-sided copies from single-sided documents. When using the 
MF4

890dw, you can also make double-sided or single-sided copies from double-sided 
documents.
1 Place your documents (→p.19).
• 
To make double-sided copies from single-sided documents, place the documents in 
the feeder or on the platen glass.
• To make double-sided or single-sided copies from double-sided documents, place 
documents in the feeder.
2 Switch to the Copy...

35
Copy
 Copy Multiple Pages onto One Sheet
You can combine multiple pages (two or four pages) onto one copy sheet.
1 Place your documents (→p.19).
2 Switch to the Copy mode (→p.16).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight  or , and then press [OK].
 
N on 1
 Off
 2 on 1
 4 on 1
 ID Card Copy
5 Press [▲] or [▼] to highlight the desired scan size, and then press [OK].
• 
You may specify the scan size as  size, but the actual size is  size.
6 Press [  ]...

36
 Copy a Double-Sided ID Card
You can make a copy of a double-sided ID card onto single-sided paper.
1 Place an ID on the platen glass.• 
Place the card at the center of the left edge of the platen glass, with a 1/4” (5 mm) 
space created.
To place the card horizontally
A5STMTB5A4LTRA5STMTNNNN
To place the card vertically
A5STMTB5A4LTRA5STMTNNNN
2 Switch to the Copy mode (→p.16).
3 Press [▲] or [▼] to highlight , and then press [OK].
4 Press [▲] or [▼] to highlight , and then press [OK].
5 Press [...

37
Copy
 View and Cancel Copy Jobs  
You can view or cancel copy jobs while the jobs are in progress.
1 Press [  ] (Status Monitor/Cancel).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 View the details of a copy job or cancel the job.• 
To view the details, press [▲] or [▼].
• To cancel the job, press [▲] or [▼] to highlight < Cancel>, and then press [ OK].
 
Copy Job Status
 
 Job Number: 0001
 Status: Copying
 Time: 01/01 12:52 AM
4 Press [  ] (Status Monitor/Cancel) to close the screen....

3838
 Memo 
   

39
Print a Document  ………………………………………………\
…… 40
Enlarge or Reduce a Document  ……………………………………… 40
Print a Double-Sided Document (MF4890dw/MF4880dw Only)  …… 41
Print Multiple Pages onto One Sheet ………………………………… 42
Print a Booklet (MF4890dw/MF4880dw Only)  ……………………… 43
Print a Poster  ………………………………………………\
………… 44
Add Watermarks to a Printout  ……………………………………… 45
View and Cancel Print Jobs …………………………………………… 46
Print
This chapter describes basic Print functions.
Before using the printing functions, connect the...

40
Print a Document 
1 Make sure that a computer and the machine are connected properly, and 
the printer driver is installed on the computer.
2 Open a document from an application, and then open the Print window.
3 Select your printer driver, and click [Preferences] (or [Properties]). 
 
4 Specify the print settings such as the number of copies and print 
orientation, and click [OK].
5 Click [Print] to start printing.
Canceling Print Jobs
Press [  ] (Stop) twice.
*  It is valid when only one job is...