Canon printer MAXIFY MB2020 User Manual

1600Cause
Ink may have run out.
Action Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing, press the machine's  OK button with the ink
tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The
machine may be damaged if printing is continued under the ink out condition.
Since the information contained in the fax may be lost if it is printed in this condition, the received fax will
not be printed and will...

1660Cause
The ink tank is not installed.
Action
Install the ink tank.1032 

1688Cause
The ink has run out.
Action
Replace the ink tank and close the front cover.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable...

1700Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.1034 

1701Cause
The ink absorber is almost full.
Action Press the machine's  OK button to continue printing. Contact the service center.1035 

1754Cause
The ink tank is not installed properly.
Action Open the front cover.
Then push the ink tank.
After installing the ink tank properly, close the front cover.
If the problem is not resolved, contact the service center.
Important
•
The ink tank that was once installed cannot be removed until the ink runs out.
1036 

1755Cause
The ink has run out.
Action
To maintain both machine and print quality, the machine cannot continue printing under the ink out condition.
Cancel printing and replace the ink tank before printing again.
Important
•
Do not remove an ink tank until a new one is prepared to be installed.
•
Once you remove an ink tank, the machine will not operate until a new one is installed.
•
Once you remove an ink tank, the machine will not operate even if the removed ink tank is just
reinstalled.
Note
•
Since...

1871Cause
The cassette is not inserted.
Action Insert the cassette.
Note
•
The cassette paper information registration screen is displayed after inserting the cassette. Registerthe cassette paper information according to the paper you loaded in the cassette.
•
If you want to cancel printing, press the machine's  Stop button.
1038 

1890Cause
The protective material for the print head holder or the tape may remain attached to the holder.
Action Open the front cover, then confirm that the protective material or the tape does not remain attached to the
print head holder.
If you find the protective material or the tape remains attached, remove it, then close the front cover.
If the problem is not resolved, contact the service center.
1039 

2001Cause
The device incompatible with the machine is connected.
Action Check the device connected to the USB flash drive port. Printing photos directly is possible with a USB
flash drive.1040