Canon projector LV7105 User Manual

11
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
COMPUTER INPUT TERMINAL
Terminal : HDB15-PIN 
Connect the display output terminal of the computer to
COMPUTER INPUT terminal of this projector with the
VGA Cable (supplied).  When connecting the
Macintosh computer, the MAC Adapter (not supplied)
is required.
512341096781514131112
Red Input
Ground (Horiz.sync.)
Green Input
Sense 2Blue Input
Ground (Red)Ground (Green)Ground (Blue)
1
5
2
43
678
No Connect
Horiz. sync.
Ground (Vert.sync.)
Sense 1Sense 0...

12
CONNECTING THE PROJECTOR
CONNECTING TO THE VIDEO EQUIPMENT
COMPUTER IN
S – VIDEO
COMPUTER
CONTROL   PORT RESET
AUDIO
INAV
Y  –  Pb/Cb – Pr/Cr
AUDIO   OUT
VIDEO
Video Source (example)
Video Cassette Recorder Video Disc Player
Video Cables ✽
S-VIDEO 
Cable ✽
Audio Amplifier Audio Speaker (stereo)
Audio Cable 
(Stereo) 
✽
Terminals 
of the Projector
Use any of VIDEO jack Y-Pb/Cb-Pr/Cr
jacks or S-VIDEO jack.
•When both VIDEO jack and S-
VIDEO jack are connected, the S-
VIDEO jack has priority over the...

13
CONNECTING THE PROJECTOR
COMPUTER IN
S – VIDEO
COMPUTER
CONTROL   PORT RESET
AUDIO
INAV
Y  –  Pb/Cb – Pr/Cr
AUDIO   OUT
VIDEO
13 MODE (640 x 480)
16 MODE (832 x 624)
19 MODE (1024 x 768)OFF ON ON
ON ON
ON ONOFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF1234 56
OFF OFF ON ON ON ON 21 MODE (1152 x 870)
ON
1DIP23456
ON
OFF
CONNECTING TO THE COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
Monitor Output Desktop type Laptop type
Audio Speaker
(stereo) Audio...

14
VOLUME
POWER
D.ZOOM
KEYSTONE
VIDEO
MENUMUTE
P-TIMER
NO SHOWFREEZE
AUTO IMAGENORMAL
COMPUTER
BEFORE OPERATION
OPERATION OF THE REMOTE CONTROL
Used to select COMPUTER
input source.  (P22)
Used to select VIDEO
source.  (P29)
Used to execute the item
selected or to expand the
image in DIGITAL ZOOM
mode. (P28)
It is also used as a PC
mouse in Wireless Mouse
Operation. (P34)
POWER ON-OFF BUTTON
Used to turn the projector on
or off.  (P19)
MENU BUTTON
Used to select MENU
operation.  (P17, 18)
SELECT BUTTON...

15
BEFORE OPERATION
VOLUME
POWER
D.ZOOM
KEYSTONE
VIDEO
MENUMUTE
P-TIMER
NO SHOWFREEZE
AUTO IMAGENORMAL
COMPUTER
MUTE BUTTON
Used to mute sound.(P21)
NO SHOW BUTTON
Used to turn the picture
into black image.  (P21)
AUTO IMAGE BUTTON
Use to operate AUTO
IMAGE function.  (P27)
VOLUME BUTTON
Used to adjust volume.
(P21)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM mode and resize
the image. (P28)
KEYSTONE BUTTON
Used to correct the
keystone distortion.
(P20, 28, 30)
FREEZE BUTTON
Used to freeze the picture....

16
WIDETELE
POWER MENU
MODE NORMAL
LAMP
REPLACEWARNING
TEMP.READY
LAMP
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to open or close
the MENU operation.
(P17, 18)
MENU BUTTON
MODE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
NORMAL BUTTON
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT BUTTONS
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P22, 29)
This indicator lights
green when the projector
is ready to be turned on.
And it flashes green in
Power...

17
BEFORE OPERATION
HOW TO OPERATE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT button.  The dialog
box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT/ LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for...

18
BEFORE OPERATION
MENU BAR
SYSTEM MENU
Used to select a
computer
system.
(Refer to P22)
IMAGE MENU
Used to adjust the
computer image. [Fine sync
/ Total dots / White Balance /
Contrast / Brightness /
Gamma]
(Refer to P26)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P24, 25)
SETTING MENU
Used to adjust Volume,
set the Display Menu and
reset Lamp Replacement
Monitor Timer. 
(Refer to P32, 33)
MODE MENU
Used to select
the Computer
input mode.
(Refer to...

19
BASIC OPERATION
TURNING ON THE PROJECTOR
Connect the projectors AC Power Cord into a wall outlet.  The
LAMP indicator lights RED, and the READY indicator lights
GREEN.
Press the power ON-OFF button on the Remote Control Unit or
on the Top Control to ON.  The LAMP indicator dims, and the
Cooling Fans start to operate.  The Preparation Display appears
on the screen and the count-down starts.  The signal from the
source appears after 30 seconds.
2
3
TURNING OFF THE PROJECTOR
Press the power ON-OFF button...

20
BASIC OPERATION
ADJUSTING THE IMAGE
KEYSTONE ADJUSTMENT
1Press the  KEYSTONE /button on the Remote Control Unit
or select the Keystone on SCREEN MENU.  (Refer to page 28,
30.)  The message “Keystone” is displayed.
2Correct the Keystone distortion by pressing the KEYSTONE
/button or the POINT UP/DOWN button(s).  Press the
KEYSTONE button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE button or
the POINT DOWN button to reduce the lower part.  
The message...