Canon scanner CanoScan 3200F User Manual

							Try Scanning
9
7Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step6:
Flexible / 4x6 / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 6:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 
2048 x 1536 / Custom Settings
[Flexible] is selected in this example.
Selecting [Flexible] scans the item at the same size as the 
original.
Selecting an option other than [Flexible] in the [Image Display] 
category allows you to select the output size in pixels. 
You can scan items at the correct dimensions for computer 
displays (screen area) and digital cameras.
8Click [Scan].
The final scan will start. 
9Click close box   (Windows) or   (Mac OS X) or  
 (Mac OS 9) in the ScanGear CS  window to close 
it.
The scanned image will appear in the PhotoStudio window.
10Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPG format is recommended) and click 
[Save].
11Click close box   (Windows) or   (Mac OS X) or 
 (Mac OS 9) in the PhotoStudio  window to close 
it.
• If the scanner does not perform as described above, read the Troubleshooting section 
of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the User’s 
Guide (PDF format manual) for each software program on the CanoScan Setup Utility 
CD-ROM. 
						

							Using the Scanner Buttons
10
Using the Scanner Buttons
You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily 
with a single touch of the button. Place an item on the scanner before pressing a button.
 
• To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoStudio and Acrobat 
Reader should be installed from the CanoScan Setup Utility CD-ROM.
 COPY Button
To print (copy) the scanned image with a printer:
1Press the [COPY] button.
2The scanner will scan the item.
3The scanned image will print.
• The printer driver should be installed and the 
printer should be on-line to use this function.
 SCAN Button
To open the scanned image in the PhotoStudio 
window:
1Press the [SCAN] button.
2The scanner will scan the item.
3The scanned image will appear in the 
PhotoStudio window.
 FILE Button
To save the scanned image as a PDF file:
1Press the [FILE] button.
2The scanner will scan the item.
3The scanned image will be saved as a 
PDF document and appear in Adobe 
Acrobat Reader. 
• If you press the [Cancel] button while scanning, you can change the default settings for 
scanning. For changing settings or arranging the scanner button assignments, refer to 
the CanoScan Toolbox section of the Scanning Guide (HTML format manual).
 E-MAIL Button
To e-mail the scanned image as an attached file:
1Press the [E-MAIL] button.
2The scanner will scan the item.
3The [E-mail software selection] dialog 
will appear. Select an option from the 
list and click [OK].
This step is required only for the first scan.
4The e-mail software will start and the 
scanned image will be attached in a 
new message window.
5Enter the receiver’s address and title, 
write a message, confirm the required 
settings, and send the message.
• To use the E-MAIL Button, one of the following e-
mail programs should be installed and enabled.
For Windows: Microsoft Outlook Express, 
Microsoft Outlook, Eudora or Netscape 
Messenger. (Some mail programs are required to 
set the MAPI function on.)
For Mac OS X: Mail (Mac OS X 10.2 or later), 
Eudora or MS Entourage*.
For Mac OS 9: Microsoft Outlook Express or 
Eudora.
* Sending multiple images to MS Entourage using 
the Multi-Scan function is not supported.  
						

							Scanning Film (for CanoScan 3200F only)
11
Scanning Film (for CanoScan 3200F only)
You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F.
Positioning the Film 
1Remove the protective sheet from the document cover. 
Slide the protective sheet up to remove it.  
When you finish scanning, replace the protective sheet by aligning 
it with the grooves in the document cover and sliding it 
downward into place.
2Insert a fingernail into the slot in the Film Guide and 
remove the Film Holder.
3Place the film face down into the groove in the Film Guide.
• Store the protective sheet in a safe place so that it 
will not get bent or broken. 
• Always replace the protective sheet when you are 
not scanning film to prevent the light source 
section from getting scratched.
• Hold the film by the edges with your fingertips to avoid getting fingerprints or dirt 
on the film surface.
• Remove dust from the film, the document glass and the light source.
Film Holder
Align the frame you wish to scan with the Film 
Guides window.Place a slide face down over the Film Guides 
window.
35 mm Strip Slide 
						

							Scanning Film (for CanoScan 3200F only)
12
4Clip the Film Holder back into the slots in the Film Guide for a 35 mm strip.
Slides do not require the Film Holder to be closed.
5Place the loaded Film Guide in the correct 
position on the document glass of the 
scanner.
6Close the document cover.
•The Film Guide has a calibration slot used by the scanner to calculate the color 
balance. The film cannot be scanned with the correct color balance if this slot is 
obstructed. Keep it clear.
• You can purchase the Accessory Kit for CanoScan 3200F (CSAK-3200F) if the 
protective sheet or the Film Guide lost or damaged.
Film Holder
Calibration Slot
Align the Film Guide’s   mark with the 
scanner’s  mark. 
						

							Scanning Film (for CanoScan 3200F only)
13
Scanning Film
The following steps explain how to scan the film with ArcSoft PhotoStudio.
1Start ArcSoft PhotoStudio.
  Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio 
5.5].
 Double-click the [Applications] folder for Mac OS X or the [Applications (Mac OS 9)] 
folder for Mac OS 9, followed by the [PhotoStudio] folder and the [PhotoStudio] icon.
2Start ScanGear CS.
  Click the Acquire icon   or click the [File] menu and select [Acquire].
Click the Acquire icon   or click the [File] menu and select [Acquire].
•  If an error message appears, click the [File] menu, choose [Select Source], select your scanner 
model name and click the [Select] button for Windows or the [OK] button for Macintosh.
ScanGear CS will start.
3Select the [Select source].
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
4Click [Preview].
After calibration, the preview scan will start and gradually 
display the image. The image is automatically cropped. 
If you want to trim the image further, drag the mouse 
diagonally to select the area.
• Do not open the document cover while a 
scan is in progress.
Windows
Macintosh (Mac OS X) 
						

							Scanning Film (for CanoScan 3200F only)
14
5Select the [Destination].
You can select [Print] or [Image display].
When [Print] is selected, the output resolution is set to 300 
dpi. When [Image display] is selected, it is set to 150 dpi.
[Print] is selected in this example.
6Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step 5:
Flexible / 4x6 / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 5:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 
2048 x 1536 / Custom Settings
[Flexible] is selected in this example.
Selecting [Flexible] scans and enlarges one film frame to the 
4x6 size. If the display mode is set to Thumbnail Display Off, 
the image is scanned at the same size as the original film. See 
the Scanning Guide for information about the Thumbnail 
Display mode.
Selecting an option other than [Flexible] in the [Image Display] 
category allows you to select the output size in pixels. 
You can scan film at the correct dimensions for computer 
displays (screen area) and digital cameras.
7Click [Scan].
The final scan will start.
When the scan is complete, click the ScanGear CS 
close box 
 (Windows) or   (Mac OS X) or   (Mac OS 9) 
.
The scanned image will appear in ArcSoft PhotoStudio.
8Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPEG format is recommended) and click 
[Save].
9Click close box   (Windows) or   (Mac OS X) or   
(Mac OS 9) in the PhotoStudio window to close it.
• If the scanner does not perform as described above, read the Troubleshooting 
section of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the 
User’s Guide (PDF format manual) for each software program on the CanoScan Setup 
Utility CD-ROM. 
						

							Using the USB 2.0 Interface (On Windows)
15
Using the USB 2.0 Interface (On Windows)
To Switch to USB 2.0
If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning 
by purchasing and installing one of the USB 2.0 expansion cards available on the market.
Compatible USB Expansion Cards/Hubs 
Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PCI bus
• Adaptec USB2connect 3100: PCI bus
• Adaptec USB2connect 2000LP: PCI bus
• Adaptec DuoConnect: PCI bus
Hubs
• Adaptec XHUB4
• Adaptec XHUB4PLUS
• Adaptec XHUB7PLUS
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
Confirming the USB Version
Use the following procedures to confirm whether your computer is 
equipped with a USB version 1.1 or 2.0 interface.
1Start ScanGear CS.
2Click the information icon   in the upper portion of the 
ScanGear CS window.
3Read the contents of the Interface category in the displayed 
window. USB 1.1 will show as “USB 1.1” and USB 2.0 as “USB 2.0.”
4Click the close box   to close the window.
Troubleshooting the USB2.0 Hi-Speed Interface
If the scanner is not operating correctly via the USB2.0 Hi-Speed interface, follow the steps below to 
troubleshoot it. 
1Ensure that you use the USB cable supplied with the scanner.
2Connect the scanner directly to a USB port on the computer, not through a USB hub.
3With the Microsoft USB 2.0 driver, if the scanner is not recognized by the computer 
after installing ScanGear CS:
• Detach the AC adapter and attach it again.
• Detach the USB cable and attach it again.
4Use the following procedures to confirm that the computer correctly recognizes the 
USB expansion card and the scanner. 
1. Open the Windows [Device Manager] and confirm that your scanner name appears below the [Imag-
ing Device] category.
2. Confirm that [Adaptec AUA-xxxx], [NEC PCI to USB Enhanced Host Controller] or [Intel PCI to USB 
Enhanced Host Controller] appears below the [USB (Universal Serial Bus) Controllers] category.
3. Confirm that the USB expansion card is correctly installed into the computer and that the scanner is 
attached to its port. 
4. If you use more than two devices via USB2.0 Hi-Speed interface, try to disconnect other devices than 
the scanner.  
						

							Specifications
16
Specifications
*1 16 bit output supports only for film scanning.*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*3 Calibration processing time is not included.*4 Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.CanoScan 3200 CanoScan 3200F
Scanner TypeFlatbed
Scanning ElementCCD 6-line color
Light SourceCold cathode fluorescent lamp
Film Adapter Unit- Standard equipped
Optical Resolution1200 x 2400 dpi
Selectable Resolution25 - 9600 dpi (ScanGear CS)
Scanning Bit DepthColor 16 bit input / 16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input / 16 bit or 8 bit output 
*1
Scanning Speed*2
(Photo or Document)Color2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
Grayscale, B&W2 msec./line (600 dpi), 3.6 msec./line (1200 dpi)
Scanning Speed*2 (Film)Color, GrayScale, B&W- 8 - 128 msec./line (1200 dpi)
Preview Speed
*3Approximately 2.6 sec.
InterfaceUSB 2.0 Hi-Speed,
USB (USB 1.1 equivalent)
Maximum Document SizeA4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
Film Type/Number of Frames -35 mm strip (negative/
positive)/1 frame
-35 mm slide (negative/
positive)/1 frame
Scanner Buttons4 buttons: COPY, SCAN, FILE, E-MAIL
Operating RangeTe m p e r a t u r e
10
°C to 35°C (50°F to 95°F)
Humidity10% to 90% RH, 20% to 80% RH when scanning film 
(without condensation formation)
Power Requirements
AC adapter (100/120/230/240V) 
*4
Power Consumption In operation: 15 watts maximum, Stand-by: 5.3 watts (Using 
supplied AC adapter)   
Maximum Exterior Dimensions259 x 474.7 x 74.7 mm (10.2 x 18.7 x 2.9 in.) 
WeightApproximately 2.5 kg 
(5.5 lbs.)Approximately 2.7 kg 
(5.9 lbs.)
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall 
ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the 
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows 
XP with these programs still installed. After upgrading to Windows XP, reinstall 
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please 
read the “Troubleshooting” section of the Scanning Guide (HTML format manual).  
						

							System Information
1
System Information
This form should be used to record the operating environment for the purchased scanner. 
If any problems occur with the scanner, you will need this information when you contact our Customer 
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the 
information and store it in a safe location.
• Guaranteed servicing for this equipment will expire five years after production ceases. 
• About the Computer UsedDate of Purchase:
Dealer Tel:
Dealer Address:
Scanner Model: CanoScan  3200  3200F
Serial Number (on the back of the equipment):
Manufacturer: Model:
CPU: Clock Speed: MHz
Memory Capacity (RAM): MB
Space Available: MB Hard Disk Capacity: MB
OS:     Windows  XP  Me  2000  98
Macintosh  OS 9.1  OS 9.2 OS X v10.1 OS X v10.2
Monitor Type: Monitor Size: inches
Printer: Manufacturer:
Type of Printer: Printer Resolutions:
Installed Virus Protection Program:
Installed Compression Program:
On-Board Expansion Cards:
Attached Peripherals:
Connected Network System: 
						

							1
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan
CANON U.S.A., INC.One Canon Plaza, Lake Success, New York 11042, U.S.A.Customer Care Center: 1-757-413-2848
http://www.usa.canon.com/consumer
CANON CANADA INC.6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada 1-800-OK CANON
http://www.canon.ca
CANON LATIN AMERICA, INC.703 Waterford Way, Suite 400 Miami, Florida 33126, U.S.A.
CANON MEXICANA, S. de R.L. de C.V.Anillo Periferico Sur No. 4124, Torre Zafiro (II) Colonia Ex-Rancho de Anzaldo, 
Piso 5 y 6, Mexico D.F.
Tel. (525) 5490-2000
CANON PANAMA, S.A.Apartado 7022, Panama 5, Rep. de Panama
Tel. (507) 279-8900
CANON CHILE, S.A.Ave. Manquehue Norte #1337, Piso 3, Casilla 187-9 Santiago, Chile
Tel. (562) 366-6600
CANON ARGENTINA, S.A.Ave. Corrientes 420 (1043) Buenos Aires, Argentina
Tel. (5411) 432-59800
CANON EUROPA N.V.P.O. Box 2262 1180 EG Amstelveen, The Netherlands 
CANON (UK) LTD.Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom For technical support, please contact Canon Help Desk.P.O. Box 431, Wallington, Surrey SM6 0XU, UK
Tel: (08705) 143 723 (Calls may be recorded)
Fax: (08705) 143 340 
For sales enquiries, please call 08705 143723
CANON COMMUNICATION & IMAGE FRANCE S.A.102 Avenue du Général de Gaulle 
92257 LA GARENNE COLOMBES CEDEX, France 
Tél: 01.41.30.15.15     Fax: 01.41.30.15.05
E-mail:[email protected]
http://www.canon.fr
CANON DEUTSCHLAND GmbHEuropark Fichtenhain A10, 47807 Krefeld, GermanyTechnischer SupportTelefax: 0810 / 500 60 22 (0.12€/Min.)
http://www.canon.de
CANON ITALIA S.P.APalazzo L, Strada 6, 20089 Milanofiori, Rozzano (MI), Italy
Tel: 02/8248.1     Fax: 02/8248.4604
Pronto Canon: 02/8249.2000
http://www.canon.it
CANON NEDERLAND N.V.Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 023-5 670 123     Fax: 023-5 670 124
Helpdesk: 023-5 681 681
http://www.canon.nl
CANON BELGIUM N.V./S.A.Bessenveldstraat 7, B-1831 Diegem, Belgium
Tel: 02 7220411     Fax: 02 7213274
Helpdesk: 090010627
http://www.canon.be
CANON LUXEMBOURG S.A.Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel.: (352) 48 47 961     Fax: (352) 48 47 96232
Helpdesk: 900 74100
http://www.canon.lu
CANON Ges.m.b.H.Zetschegasse 11, 1230 Wien, Austria
Tel.: (01) 680 88-412     Fax: (01) 680 88-413
http://www.canon.at
CANON CEE GMBHOberlaaerstr. 233, A-1100 Wien, Austria
Tel: +43 1 680 88-331     Fax: +43 1 680 88-333
CANON (SCHWEIZ) AGProduct Support CCI Industriestrasse 12, 8305 Dietlikon, Switzerland
Fax: 0041 (0) 1 835 68 59
Hotline: 0900 57 55 20 (Fr.2.13/min)
http://www.canon.ch
CANON ESPAÑA S.A.C/Joaquin Costa, 41-28002, Madrid, Spain 
Tel.: 91-538 4500     Fax.: 91-411 4176
Tel: Atención al cliente: 901.301.301
Help Desk: 906.301255
E-mail:[email protected]
CANON DANMARK A/S1. Kund Højgaards Vej1, DK-2860 Søborg, DenmarkHotline: +45 44 88 25 91
Forhandlerhenvisning:
http://www.canon.dk
CANON NORGE asHallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway 
Tlf: 2262 9321     Faks: 2262 0615
http://www.canon.no
CANON SVENSKA ABGustav III:s Boulevard 26, S-169 88 Solna, SwedenSupport-Under garantitiden: Tel. 08-744 86 20Support-Efter garantitiden: Tel. 0900-20 30 555
E-post support: [email protected]
http://www.canon.se
CANON OYKornetintie3, 00380 Helsinki, Finland
Puhelin: 010 54420     Fax: 010 544 4571 
Helpdesk: 0600 0 22606 (9,95 mk/min+pvm)Helpdesk: 0600 0 22666 (enint. 40 mk/puhelu+pvm)
Faksi: 010 544 4382
Sähköposti: [email protected]
Internet: www.canon.fi
CANON NORTH-EAST OYHuopalahdentie 24, P.O. Box 46, FIN-00351 Helsinki, Finland
Tel. +358 10 544 20     Fax +358 10 544 10
http://www.canon.ru
http://www.canon.ee
http://www.canon.lv
http://www.canon.lt
COPICANOLA SARua Alfredo da Silva, 14, 2721-862 Alfragide, Portugal
Tel: 21 471 11 11     Fax: 21 471 09 89
www.copicanola.pt
[email protected]
CANON SINGAPORE PTE. LTD.79 Anson Road #09-01/06, Singapore 079906
http://www.canon-asia.com
CANON MARKETING SERVICES PTE. LTD.No. 1, Jalan Kilang Timor, #09-00 Pacific Tech Centre, Singapore, 159303
Tel: 65-6799-8888,     Fax: 65-6273-6786
Hotline: 65-6334-2726
http://www.canon.com.sg
CANON MARKETING (MALAYSIA) SDN. BHD.Block D, Peremba Square 
Saujana Resort, Section, 40150 Shah Alam, Selangor Darul Ehsan 
Malaysia
Tel: 603-7844-6000,     Fax: 603-7844-6048
Helpdesk: 603-7844-6008/9
Enquiry: [email protected]
http://www.canon.com.my
CANON MARKETING (THAILAND) CO. LTD.179/34-45 Bangkok City Tower, 9th-10th Floor
South Sathorn Road, Thungmahamek
Sathorn, Bangkok 10120, Thailand
Tel: 662-3449999,     Fax: 662-3449968
http://www.canon.co.th
CANON MARKETING (PHILIPPINES) INC.Marvin Plaza Building, 2153 Don Chino Roces Ave,
Makati City, Metro Manila, Philippines
Tel: 632-8126047,     Fax: 632-8120067/8109797
CANON INDIA Pvt. LTD.Neela Gagan, Mandi Road, Mehrauli, New Delhi-110030, India
Tel: 91-11-6806572,     Fax: 91-11-6807180
CANON HONGKONG CO., LTD.9/F, The Hong Kong Club Building 3A, Chater Road, Central, Hong Kong
TEL: (852) 2739 0802     FAX: (852) 2739 6428
CANON AUSTRALIA PTY. LTD.1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia 
Info-Line: (02) 9805 2864
CANON NEW ZEALAND LTD.Akoranga Business Park, Akoranga Drive, Northcote Auckland, New Zealand 
Info-Line: (09)489 0470
ADOBE SYSTEMS INCORPORATED
http://www.adobe.com
ARCSOFT, INC
http://www.arcsoft.com
SCANSOFT, INC
http://www.scansoft.com
Ulead Systems, INC
http://www.ulead.com
I-IE-091A ©CANON INC. 2003 PRINTED IN CHINA