Home > Canon > Scanner > Canon scanner CanoScan 5000F User Manual

Canon scanner CanoScan 5000F User Manual

Here you can view all the pages of manual Canon scanner CanoScan 5000F User Manual. The Canon manuals for Scanner are available online for free. You can easily download all the documents as PDF.

Page 11

9
Try Scanning
7Click [Scan].
The final scan will start. 
8Click   or   (close box) in the ScanGear CS  
window to close it.
The scanned image will appear in the PhotoStudio window.
9Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder 
where you wish to store the image file, enter a file name, 
select a file type (JPG format is recommended) and click [Save].
10 Click   or   (close box) in the PhotoStudio 
window to close it.
• If the scanner does not perform as described...

Page 12

10
Using the Scanner Buttons
You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily 
with a single touch of the button. Place an item on the scanner before pressing a button.
 
• To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoBase and Presto! 
PageManager (Windows)/Acrobat Reader (Macintosh) should be installed from the 
CanoScan Setup Utility CD-ROM.
 COPY Button
To print (copy) the scanned image with a printer:
1Press the [COPY]...

Page 13

11
Scanning Film (for CanoScan 5000F)
You can scan 35 mm film (a film strip or slides) with this scanner.
Positioning the Film 
Use the following procedures to insert the film into the film guide. 
1Remove the protective sheet from the document cover. 
Slide the protective sheet up to remove it.  
When you finish scanning, replace the protective sheet by aligning it with the grooves in the document 
cover and sliding it downward into place.
2Insert the film into the film guide. 
Film Strip
Open the film...

Page 14

12
Scanning Film (for CanoScan 5000F)
3Place the loaded film guide on the scanner platen.
Up to three frames in a film strip can be scanned at once. Position the film guide so that the three frames 
being scanned are toward the back of the platen and, as in the diagram, align the film guide with the 
FILM symbol on the platen. To scan the remaining frames, pivot the film guide 180°.
Up to two slides can be scanned at once. Position the slides toward the back of the platen and, as in the 
diagram, align...

Page 15

13
Scanning Film (for CanoScan 5000F)
Simple Mode   
3In the [Select source] category, select [Film].
4In the [Film type] category, select [Nega/Sleeve] or 
[Posi/Sleeve].
In ScanGearCS’s Simple Mode,the settings for film scanning 
are pre-set so that 35 mm film can be scanned and printed at 
the photo size. The Output Resolution is pre-set to 300 dpi and 
the Print Size to the photo size (8.9 x 12.7 cm/3.5 x 5 in.).
Advanced Mode 
3Select the film type in the [Select source] category. 
Select an option...

Page 16

14
Scanning Film (for CanoScan 5000F)
5Click [Preview].
6Place a check mark beside the number(s) of the 
frame(s) to be scanned and click [Scan].
At first, a check mark only appears beside the first frame. You 
can scan multiple frames in one step if you place check marks 
beside the numbers of each frame you wish to include. 
The scanner will start scanning the items.
When the scan is complete, click the ScanGear CS close box 
(  (Windows) or   (Macintosh)).
The scanned image will appear in ArcSoft...

Page 17

15
System Information
This form should be used to record the operating environment for the purchased scanner. 
If any problems occur with the scanner, you will need this information when you contact our Customer 
Support Help Desk. Be sure to record the information and store it in a safe location.
• This information is also required to request a repair under warranty. Make sure you record the 
information and store it in a safe location.
• Guaranteed servicing for this equipment will expire five years...

Page 18

Specifications
*1 Available only when scanning films.*2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.*3 Calibration processing time is not included.*4 Type of AC adapter depends on the area where the scanner is purchased.
• Specifications are subject to change without notice.CanoScan 5000F CanoScan 5000
Scanner TypeFlatbed
Scanning ElementCCD 6-line color
Light SourceCold cathode fluorescent lamp
Optical Resolution2400 x 4800 dpi
Selectable Resolution25 - 9600 dpi (ScanGear CS)...

Page 19

CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku
Tokyo 146-8501, Japan
CANON U.S.A., INC.Digital Home and Personal Systems Division
2995 Redhill Avenue, Costa Mesa, CA 92626, U.S.A.
Customer Care Center: 1-757-413-2848
http://www.usa.canon.com/consumer
CANON CANADA INC.6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
1-800-OK CANON
http://www.canon.ca
CANON LATIN AMERICA, INC.703 Waterford Way, Suite 400
Miami, Florida 33126, U.S.A.
CANON MEXICANA, S. de R.L. de C.V.Anillo Periferico Sur No. 4124, Torre...
Start reading Canon scanner CanoScan 5000F User Manual

Related Manuals for Canon scanner CanoScan 5000F User Manual

All Canon manuals