Canon scanner CanoScan LiDE 35 User Manual

1
English
Quick Start Guide Quick Start Guide
Setup and Scanning
Try the Additional Features
Check the Package Contents
Install the Software
Windows
Macintosh
Unlock the Scanning Unit
Connect the Scanner
Try Scanning
p.3
p.4
p.5
p.6
p.7
p.8
Using the Scanner Buttonsp.11
Using the USB 2.0 Interface 
expansion cards (Windows Only)p.12
Be sure to install the software programs before connecting the scanner 
to the computer!
Please read this guide before operating this scanner. After you finish reading this...

Guide to the Manuals
2
Guide to the Manuals
• CanoScan and ScanGear are trademarks of Canon Inc.
• Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated. 
• Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
• Macintosh, Power Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
• ScanSoft and OmniPage are trademarks of ScanSoft, Inc.
• Other names and products not mentioned above may be...

Check the Package Contents
3
English
Check the Package Contents
Scanner and Accessories
Documents and Software Programs
• Quick Start Guide (this guide)
• Additional Documents
• CanoScan Setup Utility CD-ROM
• The two figures in the brackets below indicate the respective sizes of the Windows/
Macintosh versions of the software.
• Approximately 200 MB/ 160 MB (for Windows/Macintosh) of hard disk space on your 
computer is required to install all the programs. Additional free hard disk space is 
required...

Install the Software (Windows)
4
Install the Software   (Windows)
1Turn the computer on.
2Place the CanoScan Setup Utility CD-ROM in the drive.
After you select your language, the CanoScan Setup Utility main 
menu will display.
3Click [Install the Software].
Read the SOFTWARE USER LICENSE AGREEMENT. Click [Yes] if 
you accept the terms.
The [Install] window will display.
4Click [Start Installation].
You will install five software programs and the Scanning Guide
 
(HTML format manual).
5The installation...

Install the Software (Macintosh)
5
English
Install the Software   (Macintosh)
1Turn the computer on.
Make sure to log in with the first created administrator to install the software. You cannot install the 
software when logged in using added administrator accounts. 
2Place the CanoScan Setup Utility CD-ROM in the 
drive.
3Double-click the CD-ROM icon.
4Double-click the [SetUp] icon.
After you select your language, the CanoScan Setup Utility 
main menu will display. 
5Click [Install the Software].
Read...

Unlock the Scanning Unit
6
Unlock the Scanning Unit
1Peel the seals off the scanner.
2Gently turn the scanner over.
3Push the lock switch toward the unlock mark ( ). 
4Return the scanner to a horizontal position.
• Unlock the scanning unit before connecting the scanner to the computer. If it is left 
locked, a malfunction or other problem may occur.
• Do not tilt the scanner more than 90 degrees from horizontal when releasing the lock.
• When locking the scanner, do not lift up the back and tilt the...

Connect the Scanner
7
English
Connect the Scanner
1Peel the caution seal from the back of the scanner.
2Connect the scanner to the computer with the supplied USB interface cable.
Using the Scanner in the Upright Position
Installing the Stand Removing the Stand 
Positioning an item
• Make sure that the scanning unit is unlocked. (P. 6)
• Only use the USB interface cable provided with the scanner. Use of other cables may 
lead to a malfunction.
• The scanner does not have a power switch. The power is...

Try Scanning
8
Try Scanning 
The following steps explain how to scan with ArcSoft PhotoStudio.
1Place a photo or a picture on the glass 
by aligning its top edge with the 
alignment mark, and close the 
document cover.
Alignment 
Mark
Bottom
To p
2Select [Start], [Programs] or [All 
Programs], [ArcSoft PhotoStudio 5.5] 
and [PhotoStudio 5.5]. 
PhotoStudio will start.
Windows
2Double-click the [Applications] folder 
followed by the [PhotoStudio] folder 
and the [PhotoStudio] icon.
PhotoStudio will start....

Try Scanning
9
English
3Click the [File] menu and choose [Select Source].
Select your scanner model name and click the [Select] button 
for Windows or the [OK] button for Macintosh.
4Click the Acquire icon   or click the [File] menu 
and select [Acquire].
ScanGear CS will start.
5Select the [Select Source].
You can select from the following options.
Photo (Color)/Magazine (Color)/Newspaper (B&W)/Document 
(Grayscale).
6Click [Preview]. 
After calibration, the preview scan will start and gradually...

Try Scanning
10
8Select the [Output Size].
You can select from the following options.
• If you selected [Print] in Step 7:
Flexible / 4x6 / A4 / Letter / Custom Settings
• If you selected [Image display] in Step 7:
Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 
2048 x 1536 / Custom Settings
With the [Flexible] option, the scan area enclosed by the 
dotted line (cropping frame) will be scanned at the same scale 
as the original. You can change the cropping frame.
If you selected [Print] in...