Casio 140cr1 User Guide

140CR
Electronic Cash Register
EU
UKDI
START-UP is QUICK and EASY!
Simple to use!
20 departments and 120 PLUs
Automatic Tax Calculations
Calculator function
Users  Manual
(140CR small drawer model)
CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan 

2
E
INTRODUCTION
Thank you very much for purchasing this CASIO electronic cash regis-
ter.
START-UP is QUICK and EASY!
Part-1 of this Users Manual can help you make a quick start.
Once you have mastered the QUICK START operations, you will un-
doubtedly want to expand your use of this machine by studying other 
sections of Part-2.
Original Carton/Package
If for any reason, this product is to be returned 
to the store where purchased, it must be 
packed in the original carton/package.
Location
Locate the...

3
E
INTRODUCTION
Safety precautions
 
To use this product safely and correctly, read this manual thoroughly and operate as instructed.
 
After reading this guide, keep it close at hand for easy reference.
  Please keep all informations for future reference.
 
Always observe the warnings and cautions indicated on the product.
About the icons
In this guide various icons are used to highlight safe operation of this product and to prevent injury to the operator and 
other personnel and also to prevent damage...

4
E
INTRODUCTION
 Warning!
Use a dry cloth to periodically wipe off any dust built up on the prongs of the plug. Humidity can cause poor 
insulation and create the danger of electric shock and fi re if dust stays on the prongs.
Do not allow the power cord or plug to become damaged, and never try to modify them in any way. Continued 
use of a damaged power cord can cause deterioration of the insulation, exposure of internal wiring, and short 
circuit, which creates the danger of electric shock and fi re.
•...

5
E
Basic Components and Accessories Contents
Getting to know your cash register ....................................................................   6
Daily Job Flow ...................................................................................................   8
Part-1  QUICK START OPERATION ...........................................................
 9
    (You can operate this ECR on a basic level by reading the following sections)
1. Initialization...

6
E
Display
Getting to know your cash register
Note:
An error is gen-
erated (E01 dis-
played) whenever 
the position of the 
Mode Switch is 
changed during 
registration.
The position of the Mode Switch controls the type of operations you 
can perform on the cash register.  The PROGRAM key (marked PGM) 
can be select any Mode Switch setting, while OPERATOR key (marked 
OP) can be used to select OFF, REG or CAL only.
OFF
In this position, the power of the cash register is off.
REG (Register)
This is the...

7
E
Keyboard
7
1
0 48
2
0059
3
. 6
FEED PLU
DEPT
SHIFT
ERR.CORR
—
CHK
SUB
TOTALNS#
CLK#TA X
PGM%AC
=CA    AMT
TEND
C
w9/14/19
5
10/15/20
s
6/11/16 7/12/17

8/13/18
CH
POMRRA
DATE
TIMEs
1 23 4





#
%
&(
$
Certain keys have two functions; one for register mode and one for calculator mode.
In this manual, we will refer to speci c keys as noted below to make the operations as easy to un-
derstand as possible:
Getting to know your cash register
Register Mode
! 
l Feed key
@ h Multiplication/...

8
E
Daily Job Flow
Before Opening The Store
1. Plugged in?
2.  Enough Roll Paper?  Page-10
3.  Date and Time is correct?  Page-33
4.  Enough small change in the drawer?  
 Page-34
While The Store Is Open
1. Registrations.  Page-13 ~
2.  Issuing latest daily sales total if need-
ed.
  (Generating report by Mode Switch to 
X position.)  Page-17
After Closing The Store
1.  Issuing Daily Sales Total.
  (Resetting report by Mode Switch to 
Z position.)  Page-17
2.  Picking up money in the drawer.
   Page-34...

Part-1
9
E
Part-1 QUICK START OPERATION
QUICK START OPERATION Part-1
1.  Initialization / Loading Memory Protection Battery
Important
You must initialize 
the Cash register.◗ To initialize the cash register1.  Set the Mode Switch to OFF.
2.  Load the memory protection batteries.
3.  Plug the power cord of the cash register into an AC outlet.
4.  Set the Mode Switch to REG.
(Figure 1)
Note: To prevent to lose all of your settings and sales data, we reccomend you to install the 
memory protection...

10
E
Part-1  QUICK START OPERATION
2.  Loading Paper Roll And Replacing The Printer’s Ink Roll
Mode Switch
REG
OFF
RF
PGMCAL
Z X
* Replace the printer cover by 
placing the cover’s front tab 
into the register’s groove.
2.  To remove journal paper
! Remove the printer cover fol-
lowing the instructions above.
@ Press  the l key until ap-
proximately 20cm of the pa-
per is fed from the printer.
# Cut off the roll paper.
$ Remove the take-up reel 
from the printer and take off 
the left plate of the reel....