Casio Cassiopeia Be 300 Pocket Manager Users Guide

51
NOTE
•The confirmation message shown below appears when you perform step 2 of the above
operation when the task you selected is a recurrent task.
Ta p  Ye s to delete all of the tasks in the recurrent series, or No to delete only the currently
scheduled task of the series. To cancel without deleting anything, tap Cancel.
Transferring Tasks Data to Another Program
You can transfer task data from the Tasks list screen to Notes, Calendar, or Mail.
To transfer Tasks data to Notes
1. On the Tasks list...

52
To transfer Tasks data to Mail
1. On the Tasks list screen, tap the task you want to transfer.
2. Tap Send to L → Mail.
•This starts up Mail and displays a message editing screen with task elements assigned as
shown below.
3. Specify the address of the recipient, and make any changes to the subject and body text that
you want.
•See “3-3 Mail” on page 67 for more information about writing and sending e-mail messages.
Tasks
Subject
Completed
Subject
Priority
Mail
Subject
Body Text → →→ →
→
→ →→ →
→ 

53
Chapter 3 Using the Internet
3-1 Introduction
CASSIOPEIA Internet Functions
Your CASSIOPEIA comes with three programs that let you perform data communication over the
Internet.
Internet ................... This Web browser program makes it possible for you to visit Websites on the
Internet. In addition to being frames-capable, the Internet program also
supports bookmarks and the saving of pages of off-line viewing.
Mail ....................... Mail is a program for sending and receiving e-mail. It...

54
3-2 Connections
Connections is a program that lets you configure various settings to enable data communication
between your CASSIOPEIA and a computer. You can use Connections to configure the following
settings.
•Parameters (including mail server parameters) for connecting to the Internet using dial-up
connection and LAN connections
•Parameters for cable connection with a computer
This section covers Internet connections only. For information about cable connection with a
computer, see Chapter 6 of...

55
Configuring a Dial-up Connection
Basically, you configure a dial-up setup by inputting information given to you by your Internet
Service Provider. Make sure you get the following information from your provider.
Telephone number ..... This is the phone number you need to dial to connect to your provider’s
computer. Normally it is called the “access point.” You need to select an
access point that supports the type of phone (mobile, analog, etc.) you are
using.
Connection ID ........... This is the name...

56
To configure a dial-up connection setup
NOTE
With some data communication or modem cards, you need to insert the card into the
CASSIOPEIA’s card slot before you perform the steps below. For details, see the instructions that
come with the card you are using.
1. On the Top Menu, double-tap Connections.
•This starts up Connections and displays a screen like the one shown below.
2. Tap New Setting....
•This displays a screen like the one shown below for specifying the connection setup name.
Setups you...

57
3. After you are finished, tap .
•This displays a screen for configuring the access point setup.
4. After you are finished, tap .
•This displays a screen for configuring the modem you are using.
•The screens shown in steps 5 and 6 below do not appear if you selected An Internet
Application only in step 2 without selecting A Mail Application. In such a case, skip to
step 7 of this procedure.
Tap here to display a list of supported modems.
Set the speed (data rate) in accordance with your access
point...

58
5. After you are finished, tap .
•This displays a screen for configuring your mail account setup.
6. After you are finished, tap .
•This displays another screen for configuring your mail account setup.
The screen shown in step 7 does not appear if you selected A Mail Application only in step 2
without selecting An Internet Application. In such a case, skip to step 8 of this procedure.
Mail account setup 2 screenInput POP3 and SMTP server names supplied by your
provider.
Select this item if your...

59
7. After you are finished, tap .
•This displays a screen for configuring you Web browser settings.
8. If necessary, tap the  button to backtrack through setting screens to check that settings are
correct.
9. After confirming that all the settings are correct, tap Finish.
•This registers your new connection setup and returns to the initial Connections screen.
Browser setup screen
Check the list to confirm that the name of the connection
setup you just configured is included. If your connection uses a...

60
Configuring Advanced Dial-Up Settings
The following procedure describes how to configure advanced settings that appear when you tap
the Advanced settings button on the Access Point Setup screen (page 57).
1. On the Access Point Setup screen, tap Advanced Settings.
2. After you finished, tap .
3. After all the settings are the way you want, tap OK to save them and return to the Access Point
Setup screen.
Use these settings to specify the number of tries and the
interval between tries when a connection...