Casio E125 Manual

11
Terms and Symbols used in this manual
•
The term “unit” in this manual refers to the CASSIOPEIA.
• The symbol “ Important
” indicates important information about a procedure
that can result in problems if not performed correctly. Be sure to read such 
information carefully.
User Maintenance  ........................................................................\
...................  29
Batteries  ........................................................................\...

12
Getting Ready
Initial Setup
After you first unpack your CASSIOPEIA, perform the following initial setup
procedure before using it for the first time.
1. Load the main battery (rechargeable battery pack) (page 29).
Important 
Be sure to use the AC Adapter to charge the battery pack before doing anything else.
Your CASSIOPEIA will not operate correctly if you load the backup battery before
charging the battery pack.
2. Use the AC Adapter to charge the battery pack.
3. Load the backup battery.
4. Press...

13
Where to go for information...
Your CASSIOPEIA comes with two manuals: this Hardware Manual and a separate
Pocket PC User’s Guide. Be sure to read the contents of this Hardware Manual first.
What should I do after reading this Hardware Manual?
Read the Pocket PC User’s Guide next to find out about the powerful software features
and functions available on the CASSIOPEIA.
What should I do if I run into problems?
Check the troubleshooting guides on page 38 of this Hardware Manual and in the
Pocket PC...

14
Operations
General Guide
Charge indicator (Amber/Green)
Lights amber when the battery pack is
charging and turns green when full
charge is achieved.
AC adapter terminal
Touch screen
Perform operations and input
data by tapping and writing
directly on the screen.
Stylus
• Menu
(Launcher)
• Contacts
• Calendar
Speaker
Power button
Turns power on
and off.
Start button
(Program button)
Press to display the Start
menu.
Action control
See “About the
[Action] Control”
on the next page.
Record button
(Program...

15
Serial connector
For connection of the cradle,
the CASSIOPEIA USB
cable, or the RS-232C ser ial
cable.
RESET button
Main battery cover
Battery cover switch
Card lock switch
If the inserted card has
a lock, this switch locks
the card in place so it
does not come out
accidentally.
Backup battery cover
About the [Action] Control
Operations can be performed by pressing and rotating the [Action] control.
See Pocket PC online help for information about using the [Action] control with each
application. The...

16
Using the Stylus
Data input and virtually all other operations are performed using a stylus, which is
housed inside the stylus holder in the higher right corner of the CASSIOPEIA.
The following defines the various operations that you can perform with the stylus.
Tap ...................... Touch the screen once with the stylus to open items and select
options.
Drag .................... Hold the stylus on the screen and drag across the screen to select text
and images. Drag in a list to select multiple...

17
Adjusting Display Contrast
Perform the following operations to adjust display contrast and make figures on the
display darker or lighter.
•Tap 
 and then Settings. On the System tab, tap Brightness. Follow the
instructions on your screen for adjusting the contrast.
•You can also adjust contrast by holding down [Action] and pressing the top of the
cursor button to make contrast darker, and the bottom of the cursor button to make it
lighter.
Adjusting Display Brightness
Use the following operations to...

18
Using the Cradle
The cradle provides quick and easy connection between your CASSIOPEIA and a
personal computer. CASSIOPEIA can also be powered from an AC power source when
it is placed on the cradle.
•The battery pack charges while the CASSIOPEIA is on the cradle. See page 33 for
more information.
Important 
Make sure that CASSIOPEIA power is turned off before you place it onto or remove it
from the cradle.
Use the following procedure to place the unit onto the cradle.
1. Place the cradle on a desk or...

19
5. Taking care to align the serial connector on the bottom of the CASSIOPEIA with the
connector on the cradle, lower the CASSIOPEIA into the cradle as shown in the
illustration below.
Important 
Make sure the CASSIOPEIA lowers securely into the cradle as far as it can go.
To remove the CASSIOPEIA from the cradle
1. Press the cradle’s eject button.
2. Slide the CASSIOPEIA straight up from the cradle. 

20 Connecting the Cradle to a Computer
The cradle has a USB cable for connection to a personal computer. Connect the end of
the cable to a USB port of the computer to which you want to connect.
Important
•See “Required System Configuration” on page 21 for details on the type of computer
system required for use with the cradle.
•The above illustration is one example of possible connection configurations. The
locations and layouts of USB ports vary from computer to computer. See the
documentation that...