Casio EX F1 User Manual

51Snapshot Tutorial
4.Use [4] and [ 6] to select the continuous 
shutter (CS) speed you want and then press 
[SET].
• You also can change this setting using the control 
dial.
5.Use [ 8] and [ 2] to select the bottom control panel option (Prerecord 
(Still image) Time).
6.Use [ 4] and [ 6] to specify how many of the 60 images and for how 
long images should be pre-recorded in the buffer.
• You also can change this setting using the control dial.
7.Press [SET].
• The approximate number of recordable 
CS...

52Snapshot Tutorial
With High-speed Continuous Shutter (CS), images continue to be shot as long as you 
keep the shutter button depressed. You can  specify a CS speed of one to 60 images 
per second, and even change the speed whil e CS image recording is in progress.
1.Set the mode dial to t (Auto).
2.Set the CS dial to  Π(High-speed CS).
3.Use [ 8] and [ 2] to select the second cont rol panel option from the 
bottom (High-speed CS fps).
4.Use [ 4] and [ 6] to select the continuous 
shutter (CS) speed...

53Snapshot Tutorial
5.Hold down the shutter button to shoot.
Images continue to be shot as long as you keep the shutter button depressed. 
Releasing the shutter button stops shooting. • When “AUTO-N” is selected  as the CS speed, you can 
continue recording until the 
memory card becomes full. 
When any other CS speed 
setting is selected, recording 
will stop automatically after a 
maximum of 60 images are 
recorded, even if you keep the shutter button depressed.
• When “CS fps” is selected for “Ring...

54Snapshot Tutorial
4.Use [4] and [ 6] to select the Slow Motion 
View playback speed you  want and then press 
[SET].
You can select one of eight speeds, from 1 to 8. A higher level number specifies a 
faster playback speed.
• You also can change this setting using the control dial.
5.Half-press the shutter button.
This will start slow motion playback  of pre-recorded images on the monitor 
screen. • Releasing the half-pressed shutter butt on will stop slow motion playback of the 
pre-recorded images....

55Snapshot Tutorial
4.Use [8] and [ 2] to specify the number of 
images you want to record.
Select either 3 or 5.
• You also can change this setting using the 
control dial.
5.Use [ 4] and [ 6] to specify the bracket 
increment.
6.When the settings are the way you want, 
press [SET].
Recording
1.In the REC mode, set the mode dial to  t (Auto).
2.Set the CS dial to  [BKT] (Bracketing).
3.Use [8] and [ 2] to select the second cont rol panel option from the 
bottom (Bracketing).
4.Use [ 4] and [ 6] to...

56Snapshot Tutorial
.Using Auto Bracketing with White Balance Selected as the Variable 
(White Balance Bracketing)
Specifying the Bracket Increm ent and Number of Images
1.In the REC mode, press [MENU].
2.Use [4] and [ 6] to select “REC”.
3.Use [ 8] and [ 2] to select “WB Bracketing” and then press [ 6].
4.Use [ 8] and [ 2] to specify the number of 
images you want to record.
Select either 3 or 5.
• You also can change this setting using the 
control dial.
5.Use [ 4] and [ 6] to specify the white...

57Snapshot Tutorial
.Using Auto Bracketing with Focus Selected as the Variable 
(Focus Bracketing)
Specifying the Bracket Increm ent and Number of Images
1.In the REC mode, press [MENU].
2.Use [4] and [ 6] to select “REC”.
3.Use [ 8] and [ 2] to select “Focus Bra cketing” and then press [ 6].
4.Use [ 8] and [ 2] to specify the number of 
images you want to record.
Select either 3 or 5.
• You also can change this setting using the 
control dial.
5.Use [ 4] and [ 6] to specify the increment 
range.
6.When...

58Snapshot Tutorial
You can specify the method to use for saving images recorded with the following 
continuous shutter (CS) modes.
Flash CS, Prerecord (Still im age), High-speed CS, Bracketing
1.In the REC mode, press [MENU].
2.Use [4] and [ 6] to select “REC”.
3.Use [ 8] and [ 2] to select “Save CS Images”, and then press [ 6].
4.Use [ 8] and [ 2] to change the setting.
Specifying the Method for Savi ng Continuous Shutter Images
Normal (Batch)
All images that were shot are saved  after the continuous...

59Snapshot Tutorial
Select & Save
After continuous shutter shooting is finished, the shot images are played back 
at slow speed so you can select the images you want to save. • Images shot with Prerecord (Still Image) (page 50) are played back 
automatically in reverse sequence,  and then played slowly in forward 
sequence. Images recorded with other CS  modes are played back in forward 
sequence.
• When you shooting with Prerecord (Sti ll Image), the first image saved when 
you press the shutter all...

60Snapshot Tutorial
5.Press [SET] to apply the setting.
• If there is not enough available capacity on the memory card, you may not be able 
to record the number of CS images indicated on the monitor screen. Make sure 
your memory card has sufficient remain ing capacity before shooting with using 
continuous shutter.
• With continuous shutter, exposure and focus for the first image are applied for 
successive images as well.
• Continuous shutter cannot be used in co mbination with any of the following....