Casio EX FH20 User Manual

							101Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Protect
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format 
operation (page 135).
NOTE
• Performing the above procedure while a CS group folder is displayed will protect all 
the images in the CS group folder. You can protect individual images in a CS group 
by performing the above procedure while the image is displayed.
Protecting a File Against Deletion (Protect)
OnProtects specific files.
1Use [4] and [6] to scroll through the files 
until the one you want to protect is 
displayed.
2Use [8] and [2] to select “On” and then 
press [SET]. 
An image that is protected is indicated by 
the › icon.
3To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, 
select “Off” instead of “On” in step 2 above. 
All Files: 
OnProtects all files.1Use [8] and [2] to select “All Files: On” and then press [SET].
2Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in 
step 1 above. 
						

							102Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Rotation
1.Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2.When the displayed image is at the orientation you want, press 
[MENU].
NOTE
• Rotation of movie images is not supported.
• Note that this procedure does not actually change the image data. It simply alters 
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the image menu 
screen.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot. 
The original snapshot is also retained. You can resize an image to one of three image 
sizes: 5M, 2M, VGA.
• Resizing a 16:9 or 3:2 size snapshot will create an image with an aspect ratio of 
4:3, with both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the 
recording date of the original snapshot.
Rotating an Image (Rotation)
Resizing a Snapshot (Resize) 
						

							103Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Trimming
You can crop a snapshot to trim parts you do not need, and 
save the result in a separate file. The original snapshot is 
also retained.
Use the zoom controller to zoom the image to the size you 
want, use [8], [2], [4], and [6] to display the portion of 
the image you want to cut out, and then press [SET].
• The image produced by cropping a 3:2 or 16:9 image will 
have an aspect ratio of 4:3.
• The recording date of the cropped image will be the 
same as the recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a 
memory card to built-in memory.
NOTE
• You can copy snapshots or movies you recorded with this camera.
Cropping a Snapshot (Trimming)
Copying Files (Copy)
Built-in * CardCopies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It 
cannot be used to copy a single file.
Card * Built-inCopies a single file on the memory card to camera built-in 
camera memory. Files are copied to the folder in built-in 
memory whose name has the largest serial number.
• You cannot copy a continuous shutter (CS) group image 
(page 91).
1Use [4] and [6] to select the file you want to copy.
2Use [8] and [2] to select “Copy” and then press [SET].
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor 
						

							104Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Divide Group
See page 90 for details.
Procedure
[p] (PLAY) * [MENU] * PLAY Tab * Select Frame
See page 91 for details.
Dividing Up a Continuous Shutter Group (Divide Group)
Copying a Continuous Shutter Group (Select Frame) 
						

							105Printing
Printing
• You can specify which images you want to print, the number of copies, and date 
stamp settings before printing (page 108).
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want 
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print 
images directly from a memory card. For details, see the user 
documentation that comes with your printer.
Connecting Directly to a PictBridge Compatible 
Printer
You can print on a printer that supports PictBridge (page 
106).
Printing with a Computer
After transferring the images to your computer, use 
commercially available software to print. 
						

							106Printing
You can connect the camera directly to a printer that supports PictBridge and print 
images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to 
your printer’s USB port.
• The camera does not draw power over the USB cable. Check the battery level 
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you feel it 
click securely into place. Failure to insert the connector fully can result in poor 
communication or malfunction.
• Note that even while the connector is fully inserted, you still will be 
able to see the metal part of the connector as shown in the 
illustration.
• When connecting the USB cable to a USB port, make sure you 
align the connector correctly with the port.
• Make sure that the camera is turned off before plugging in or unplugging the cable. 
Check the user documentation that comes with the printer for information about 
requirements before plugging into or unplugging from the printer.
Connecting Directly to a PictBridge Compatible Printer
USB
USB cable
USB portUSB/AV port
Making sure that the 6 mark on the camera is 
aligned with the 4 mark of the USB cable 
connector, connect the cable to the camera. Large 
connector
Small connector 
						

							107Printing
.To print
1.Turn on the printer and load paper.
2.Turn on the camera.
This will display the print menu screen.
3.Use [8] and [2] to select “Paper Size”, and then press [6].
4.Use [8] and [2] to select a paper size and then press [SET].
• The following are the available paper sizes.
3.5x5, 5x7, 4x6, A4, 8.5x11, By Printer
• Selecting “By Printer” prints using a paper size selected on the printer.
• See the documentation that comes with your printer for information about 
paper settings.
5.Use [8] and [2] to specify the print option you want.
• To toggle date stamping on and off, press [BS]. The date stamp will be printed 
when “On” is indicated on the monitor screen.
6.Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the 
monitor screen. The message will disappear after a short while, even though 
printing is still being performed. Pressing any camera button will cause the 
printing status to re-appear. The print menu screen will re-appear when printing is 
complete.
• If you selected “1 Image”, you can repeat the procedure from step 5, if you 
want.
7.After printing is complete, turn off the camera and disconnect the USB 
cable from the printer and camera.
1 Image : Prints one image. Select and then press [SET]. Next, use [4] and 
[6] to select the image you want to print.
DPOF Printing : Prints multiple images. Select and then press [SET]. With this 
option, images will be printed in accordance with DPOF settings 
(page 108). 
						

							108Printing
.Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy, 
and time stamp on/off information on the memory card with the images. 
After configuring settings, you can use the memory card to print on a home 
printer that supports DPOF or take the memory card to a professional print 
service.
• Whether or not you will be able to use DPOF settings for printing depends on the 
printer you are using.
• Some professional print services may not support DPOF.
.Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing * Select images
1.Use [4] and [6] to scroll through the files until the image you want to 
print is displayed.
2.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for 
date stamping.
• Repeat steps 1 and 2 to configure settings for other images, if you want.
3.Press [SET].
Using DPOF to Specify Images to be Printed and the Number 
of Copies 
						

							109Printing
.Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * 
DPOF Printing * All images
1.Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
• If you want to include the date in the images, press [BS] so “On” is shown for 
date stamping.
2.Press [SET].
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF 
settings you configured for the images. To clear DPOF settings, specify “00” for the 
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it 
includes DPOF settings for the images to be printed and the number of copies. If you 
don’t, the print service may print all the images without regard to your DPOF settings, 
or they may ignore your date stamp setting. 
						

							110Printing
.Date Stamping
You can use one of the following three methods to include the recording date in the 
printout of an image.
.Standards Supported by the Camera
• PictBridge
This is a standard of the Camera and Imaging Products Association 
(CIPA).
• PRINT Image Matching III
Using image editing software and printing on a printer that supports 
PRINT Image Matching III makes it possible to use information about 
shooting conditions that is recorded with the image, and produce 
exactly the type of image you want. PRINT Image Matching and 
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
•Exif Print
Printing on a printer that supports Exif Print (Exif 2.2) uses 
information about shooting conditions recorded with the image to 
enhance printed image quality. Contact your printer manufacturer 
for information about models that support Exif Print, printer upgrades, etc.
Configuring 
camera settingsConfigure DPOF settings (page 108).
You can turn date stamping on and off each time you print. You 
can configure settings so some images include the date stamp 
and some don’t.
Configure the Camera’s Timestamp setting (page 129).
• The camera’s Timestamp setting imprints the date into a 
snapshot when you shoot it, so the date is always included 
when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that 
includes a date stamped with the camera’s Timestamp 
function. Doing so can cause the two stamps to be 
overprinted.
Configuring 
computer 
settingsYou can use commercially available image management 
software to date stamp images.
Professional 
print serviceRequest date stamping when ordering prints from a professional 
print service.