Casio EX FH25 User Manual

51Snapshot Tutorial
• The deterioration point depends on the current image size setting (page 
38). The smaller the image size 
setting, the higher the zoom factor 
you can use before reaching the 
image deterioration point.
• Though digital zoom generally  causes a deterioration of image 
quality, some digital zoom without 
image deterioration is possible with 
image sizes of “7M” and smaller. The 
range in which you can use digital 
zoom without image deterioration is 
indicated on the display. The...

52Snapshot Tutorial
• Range is affected by optical zoom.*The focus range is the distance from the lens surface.
Selecting a Focus Mode (Focus)
Each press of @
 (Focus) will cycle thr ough the available focus 
mode settings.
• Whenever you change to another focus mode, the previous  focus point is saved, so you can use Auto Focus for initial 
focus, and then switch to Manual Focus to make fine 
adjustments.
SettingsType of ShotFocus ModeApproximate Focus Range*
SnapshotMoviesSnapshotMovies
Q  Auto 
Focus...

53Snapshot Tutorial
To focus with manual focus
1.On the monitor screen, compose the image so 
the subject you want to focus on is within the 
yellow boundary.
2.Watching the image on the monitor screen use 
[ 4 ] and [ 6] to adjust focus.
• At this time the image that is within the boundary will 
enlarge and fill the monitor screen, which aids in 
focusing. If you do not perform any operation for two 
seconds while the enlarged image is displayed, the 
screen in step 1 will re-appear.
• When the...

54Snapshot Tutorial
• The following functions are disabled when shooting with Super Macro.
– Zoom (both optical and digital)
– Auto Macro
–Flash
–Flash CS
• The large zoom factor capabilities of this  camera can result in images being out of 
focus if the camera is moved while shoot ing with fixed focus. Whenever possible, 
mount the camera on a tripod or secure it using some other means before 
focusing. If the image is out of focus, either refocus or change to manual focus 
(MF) to adjust focus as...

55Snapshot Tutorial
Use the following procedure to specify the operation that the [AEL] button performs.
1.In the REC mode, press [MENU].
2.Use [4] and [ 6] to select the “REC” tab.
3.Use [ 8] and [ 2] to select “AE/AF Lo ck” and then press [6].
4.Use [ 8] and [ 2] to change the setting, and then press [SET] to apply it.
NOTE
• AE Lock and AF Lock are not supported while “O Tracking” is selected for the “AF 
Area” setting.
• Performing an EV shift operation while AE  Lock is in effect will cause Auto...

56Snapshot Tutorial
This mode will record consecutive images while firing the 
flash. • You can select a CS speed of 1 image, 3 images, or 
5 images per second.
• In this mode, you can specif y consecutive recording of 
three to 10 images. Recording will stop if you release 
the shutter button.
1.Set the mode dial to  ª (Flash CS).
2.Press ð (Flash up) to open the flash unit.
3.Use [ 8] and [ 2] to select the third control panel option from the 
bottom (Flash CS fps).
4.Use [ 4] and [ 6] to select the...

57Snapshot Tutorial
7.Press the shutter button to shoot.
8.If you keep the shutter button de pressed, the camera will shoot the 
number of images you specified. R ecording will stop if you release the 
shutter button before the specif ied number of images is reached.
9.Save the CS images (page 62).
IMPORTANT!
• You cannot use the Triple Self-timer in combination with Flash CS.
NOTE
• The back lamp flashes red while the flash  is charging. You will not be able to 
perform further Flash CS shooting until...

58Snapshot Tutorial
5.Set the mode dial to Õ (High Speed CS).
• This will display  Z (Normal Speed CS).
6.Hold down the shutter button to shoot.
Images continue to be shot  as long as you keep the 
shutter button depressed and there is memory 
available to store them. Releasing the shutter button 
stops shooting.
IMPORTANT!
• Combining Normal Speed CS images into a CS group (page 105) manually on the 
playback screen is not supported.
• You cannot specify the number of images s hot per second (fps) with...

59Snapshot Tutorial
*You can record up to 30 images (pre-recorded buffer images plus real-time images) for 
each Prerecord CS operation.
• You can specify 5, 10, 20, or 30 as the maximum number of shots for each continuous shutter operation.
• You can specify anywhere from 0.75 sec onds up to 30 seconds as the continuous 
shutter shooting time, which is the amount of  time of the pre-record buffer plus the 
amount of time that continuous shutter recording is performed after the shutter 
button is...

60Snapshot Tutorial
5.Set the mode dial to Õ (High Speed CS).
• This will display  Š (High Speed CS).
6.Press [SET].
7.Use [ 8] and [ 2] to select the third control 
panel option from the bottom (High Speed CS 
fps).
8.Use [ 4] and [ 6] to select the continuous shutter 
(CS) speed you want  and then press [SET].
9.Use [8] and [ 2] to select th e second control 
panel option from the bottom (Max CS shots).
10.Use [ 4] and [ 6] to select the maximum number of shots for each 
continuous shutter operation...