Casio Projector XJ-A135V User Manual

21
Drive Menu
Entering the Presentation Mode, Slide Mode, or Movie Mode while there are multiple memory devices 
connected to the Data Projector (multiple USB memory devices connected via a USB hub, multiple 
memory cards loaded in the memory card reader connected to the Data Projector, etc.) will cause a 
menu like the one shown below to appear on the projection screen.
When this happens, use the cursor ke ys to move the highlighting to the drive you want to use and then 
press the [ENTER] key. This...

22
Projecting an ECA (Presentation) File
Use the Viewer Presentation Mode to project ECA files.
To project an ECA file
1.Connect the memory device where the ECA file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highligh ting to “Presentation” and then press 
the [ENTER] key.
 This will project a file menu like the...

23
Operations during ECA File Projection
The operations described below can be performed while an ECA file is playing.
The operations described below can be performed while ECA  file playback is paused.
To do this:Perform this operation:
Go to the previous page Press the [] key.
Go to the next page Press the [] key.
Pause ECA file playback 1. Press the [FUNC] key.
2. On the function menu that appears, use the cursor keys to move the  highlighting to “Pause” and  then press the [ENTER] key.
Jump to a...

24
Page Menu Operations
Pressing the [O] key while an ECA file is being played will project a page menu like the one shown 
below.
The operations described below  can be performed while the page menu is being projected.
To do this:Perform this operation:
Re-start file playback from a 
particular page Use the cursor keys to move the high
lighting to the thumbnail of the page 
where you want to start playback of the presentation and then press the 
[ENTER] key.
Scroll to the next screen Press the [ Z]...

25
Projecting an Image File
Use the Viewer Slide Mode to project image files. You can also group image files and project them in a 
specific sequence as a slideshow.
To project an image file
1.Connect the memory device where the image file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highli ghting to “Slides” and...

26
Projecting a Slideshow
The Data Projector’s Slide Mode lets you group multiple image files and project them in sequence as a 
slideshow. You can select either manual playback or auto playback for slideshow image display. The 
initial default setting is manual playback.
To prepare image files for slideshow play
Note the following points when preparing your slideshow on your computer.
 All of the image files in the slideshow must be in the same folder.
 Images will appear during a slideshow in the...

27
6.Perform the operations described below as required.
The following operations can be performed while a slideshow is paused.
7.To return to the file menu after the sl ideshow is complete, press the [ESC] key.
Projecting a Movie File
Use the Viewer Movie Mode to project movie files.
NoteViewer supports playback of Motion JPEG form at AVI movie files (see page 5 for details). 
Playback of other format movie files is not supported.
 The CD-ROM that comes with th e Data Projector contains software...

28
To project a movie file
1.Connect the memory device where the movie file you want to project is stored to 
the Data Projector.
 This will project the main Viewer window. If the main Viewer window does not appear, press 
the [INPUT] key and select “USB” as the input source.
2.Use the cursor keys to move the highli ghting to “Movie” and then press the 
[ENTER] key.
 This will project a file menu like the one shown below.
 If the movie file you want to play back is located in a particular folder, use...

29
Operations during Movie File Projection
The operations described below can be performed while a movie file is playing or paused.
* For details about fast forward and fast reverse, see “To perform fast forward and fast reverse during 
movie playback”, below.
To perform fast forward and fast reverse during movie playback
1.Perform steps 1 through 3 under “To proj ect a movie file” (page 28) to start 
playback of the movie file.
2.Press the [ ] key for fast forward or the [ ] key for fast reverse.
...

30
3.Perform the operations described below as required.
File Menu Operations
This section explains operations you can perform while the file list is displayed in the Presentation, 
Slide, or Movie Mode.
List View and Icon View
There are two different views for the Viewer file menu: a list view and an icon view.
List view:
This view lists the names of the folders and files on a memory device. This is the initial default view for 
the Presentation, Slide, or Movie Mode.
Icon view:
This view shows both...