Casio Projector XJ-A242 User Manual

41
To specify the screen resolution of the ECA file or PtG file
1.Right-click the left side of the EZ-Converter FA window.
2.On the menu that appears, click “Output Resolution”.
3.On the sub-menu that appears, select the resolution you want.
zSelect 1280 × 800 or 1280 × 768. If you cannot select the 1280 × 800 or 1280 × 768 
resolution, select 1024 × 768.
zFor a PtG file, select 1024 × 768 or 800 × 600.
zThe setting you select here remains in effect until you change it.
To specify the maximum animation...

42
4.Select the ECA file or PtG file you want to play back and then click the [Open] 
button.
zThis will display a control panel at the top of the screen.
zDuring file playback, you can use the control panel buttons to perform the operations 
described below.
To do this:Perform this operation:
Go to the previous page Click the   button.
Go to the next page Click the   button.
Jump to a specific page 1. Click the   button and then click “Slide Viewer” on the menu that appears.
2. On the page menu that...

43
USB Display Function Overview
Connecting the projector to a computer with a USB cable* enables projection of the computer’s 
screen contents. This supports projection of screen contents of even small computers that have only a 
USB port, but no RGB, HDMI, or other type of video output terminal.
*To use the USB Display function, connect the computer to the projector’s USB-B port.
Minimum Computer System Requirements
zSupported Operating Systems
Windows XP SP3, Windows Vista SP1 (32bit), Windows 7 SP1...

44
To project Windows computer screen contents over a USB 
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER] 
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to 
connect the projector’s USB-B port (Micro USB B type) to your computer’s USB 
port.
zThe location of the USB-B port of this...

45
To project Mac OS computer screen contents over a USB 
connection for the first time
1.Press the [INPUT] key. This will display the “Input” dialog box.
2.Use the [T] and [S] keys to select “USB Display” and then press the [ENTER] 
key.
zThis will cause the USB Display standby screen to be projected.
3.While your computer is running, use a commercially available USB cable to 
connect the projector’s USB-B port to your computer’s USB port.
zThe location of the USB-B port of this projector is indicated...

46
Supported Operations during Projection over a USB connection
The operations described in the table below are supported on the CASIO USB Display window during 
projection.
To do this:Perform this operation:
Start (resume) computer screen projection
Click .
Freeze computer screen projection
Click .
Stop computer screen projection and project the USB 
display standby screenClick .
Start audio output from a computer*
1*3Click  . On the menu that appears, select “Audio 
Out” so there is a check mark next...

47
To project computer screen contents over a USB connection 
after the first time
1.Turn on and start up the projector and computer.
2.Press the [INPUT] key. This will  display the “Input” dialog box.
3.Use the [T] and [ S] keys to select “USB Display”  and then press the [ENTER] 
key.
z This will cause the USB Display  standby screen to be projected.
4.Use a USB cable to connect the projector’s  USB-B port to your computer’s USB 
port.
z The CASIO USB Display will startup automatically  on the...

48
You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the 
calculator’s screen image with the Data Projector. USB connection of the following CASIO graphing 
calculators is supported.
zClassPad II (fx-CP400)
zClassPad 330 PLUS
zfx-CG series
zfx-9860G series
zfx-9860GII series
zfx-9750GII
zGRAPH 95/85/85 SD/75/75+/35+
To project the screen image of a graphing calculator
1.While the projector is turned on, connect the USB cable that comes with the 
graphing...

49
Operating the Projector
This section explains how to use the remote controller to perform projector operations.
To use manual keystone correction (KEYSTONE)
The projector has a keystone correction feature that prevents 
distortion of the projected image when projecting from an 
angle. The projector detects when it is at a vertical angle to the 
screen and performs keystone correction automatically.
You can use the [KEYSTONE +] and [KEYSTONE –] keys to 
adjust keystone correction manually.
To zoom an...

50
To mute the audio (VOLUME)
1.Press the [VOLUME +] or [VOLUME –] key to display the “Volume” screen.
2.Press the [ENTER] key.
zThis stops output from the speaker.
3.To restore the audio, press the [VOLUME +] or [VOLUME –] key.
To momentarily blank the image and mute the audio (BLANK)
1.Press the [BLANK] key.
zThis blanks the screen by displaying the blank screen image specified by the Setup Menu 
“Blank Screen” setting (page 59) and mutes the audio.
2.To resume normal image and sound, press the [BLANK]...