Casio Projector XJ-H1600 XJ-H1650 User Manual
Here you can view all the pages of manual Casio Projector XJ-H1600 XJ-H1650 User Manual. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
DATA PROJECTOR XJ-H1600/XJ-H1650* XJ-H1700/XJ-H1750* XJ-ST145*/XJ-ST155* User’s Guide zBe sure to read the precautions in the separate Setup Guide. For details about setting up the projector, see the Setup Guide. zBe sure to keep all user documentation handy for future reference. E * USB Port Models
Page 2
2 zDLP is a registered trademark of Texas Instruments of the United States. zMicrosoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. zHDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. zXGA is a registered trademark of IBM Corporation of the United States. zPJLink is a trademark applied for registration or is already registered in Japan, the...
Page 3
3 Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals .......................................................................................9 Operation During Projection...
Page 4
4 Configuring Advanced Projector Settings .................. 21 Basic Setup Menu Operations .............................................................21 Displaying the Setup Menu ........................................................................................ 21 Configuring Setup Menu Settings.............................................................................. 21 Basic Setup Menu Example....................................................................................... 22 Direct...
Page 5
5 Appendix ........................................................................ 44 Connecting to a Video Device ..............................................................44 Connection to a composite video output or S-video output ..................................... 44 Connection to a component video output ................................................................. 45 Connecting the HDMI Output of a Video Device or Computer to the...
Page 6
6 Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. XJ-H1600/XJ-H1650/XJ-H1700/XJ-H1750/XJ-ST145/XJ-ST155 zMercury-free Hybrid Light Source: A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 4000 lumens. This projector does not use a mercury lamp, making it environmentally friendly. zA wide selection of input sources: Analog RGB, composite video, S-video, component video...
Page 7
7 XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 zProjection of Data from USB Memory or a Memory Card without a Computer: USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projector’s USB-A port. The projector comes with special software for converting PowerPoint presentation data to a format that can be stored to USB memory or a memory card and projected without using a computer. Images and movies also can be projected directly from USB memory or a...
Page 8
8 Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector. Remote Controller Keys The remote controller does not come with batteries loaded. You need to load the two supplied batteries before use. Important!To avoid running down the batteries, store the remote control unit so its keys are not pressed...
Page 9
9 1 USB-A port (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only) 2 LAN port (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only) 3 HDMI port 4 MONITOR OUT terminal 5 COMPUTER IN 1 terminal 6 COMPUTER IN 2 terminal 7 Remote control signal receiver 8 Power connector 9 SERIAL port*1 bk AUDIO OUT terminal bl Anti-theft lock hole bm AUDIO IN 1 terminal bn AUDIO IN 2 terminal bo AUDIO IN L/R terminals bp VIDEO terminal bq S-VIDEO terminal br USB-B port*2 (XJ-H1650/XJ-H1750/XJ-ST145/XJ-ST155 only) Back Terminals *1 This...
Page 10
![Page 10
10
Operation During Projection
Turning on the projector initially causes the same input source that was selected the last time it was
turned off to be selected.
To select a different input source
1.Press the [INPUT] key.
zThis displays the input source selection screen.
2.Select either the Normal Input Mode or 3D Input Mode depending on the type of
image you want to project.
zFor details about the 3D Input Mode, see the explanation in the following section.
3.Use the [T] and [S] keys to select the name...](http://img.usermanuals.tech/thumb/16/98894/w300_projector_manual_6698_d-9.png "Page 10
10
Operation During Projection
Turning on the projector initially causes the same input source that was selected the last time it was
turned off to be selected.
To select a different input source
1.Press the [INPUT] key.
zThis displays the input source selection screen.
2.Select either the Normal Input Mode or 3D Input Mode depending on the type of
image you want to project.
zFor details about the 3D Input Mode, see the explanation in the following section.
3.Use the [T] and [S] keys to select the name...")
10 Operation During Projection Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1.Press the [INPUT] key. zThis displays the input source selection screen. 2.Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project. zFor details about the 3D Input Mode, see the explanation in the following section. 3.Use the [T] and [S] keys to select the name...