Casio Xj-s31, Xj-s36, Xj-s41, Xj-s46 Data Projector Users Guide
Here you can view all the pages of manual Casio Xj-s31, Xj-s36, Xj-s41, Xj-s46 Data Projector Users Guide. The Casio manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 1
DATA PROJECTOR XJ-S31/XJ-S36 XJ-S41/XJ-S46 User’s Guide zBe sure to read the precautions in the separate User’s Guide (Basic Operation). For details about setting up the projector and lamp replacement, see the User’s Guide (Basic Operation). z Be sure to keep all user documentation handy for future reference. E
Page 2
2 DLP is a registered trademark of Texas Instruments of the United States. Microsoft, Windows, Windows NT, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Other company and product names may be r egistered product names or trademarks of their respective owners. The contents of this User’s Guide are subject to change without notice. Copying of this manual, either in part or its entirety is forbidden. You are allowed...
Page 3
3 Contents About this manual... .......................................................................................... 4 XJ-S36/XJ-S46 Users .................................................................................................. 4 Operation During Projection .......................................... 5 Image Operations During Projection ................................................................. 5 Adjusting Image Brightness...
Page 4
4 Appendix ............................................ ............................ 29 Remote Controller Signal Range .................................................................... 29 Projection Distance and Screen Size .............................................................. 30 Full-screen Display of an RGB Image ............................................................. 31 Supported Signals ........................................................................................... 32...
Page 5
5 Operation During Projection This section explains the various types of operations you can perform while the projector is projecting an image. You can perform the following oper ations while projecting an image. z Image brightness adjustment z Color mode selection z Image zooming z Momentary cut off of the input source image and projection of a black or blue screen, or a logo z Image freeze z Pointer display in the projected image z Aspect ratio switching (between 4:3 and 16:9) Adjusting Image...
Page 6
![Page 6
6
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected
image in accordance with image c ontents and projection conditions.
Note
(for XJ-S36/XJ-S46 model users)
Use the setup menu (page 11) to select the color mode when you have an external
device connected to the projector’s USB port.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the
one whose button...](http://img.usermanuals.tech/thumb/16/85691/w300_casio-xj-s31-manual_d-5.png "Page 6
6
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected
image in accordance with image c ontents and projection conditions.
Note
(for XJ-S36/XJ-S46 model users)
Use the setup menu (page 11) to select the color mode when you have an external
device connected to the projector’s USB port.
To change the color mode
1Press the [COLOR MODE] key.
zThis displays the color mode selection window. The currently selected color mode is the
one whose button...")
6 Selecting the Color Mode You can select from among five different color mode settings to optimize the projected image in accordance with image c ontents and projection conditions. Note (for XJ-S36/XJ-S46 model users) Use the setup menu (page 11) to select the color mode when you have an external device connected to the projector’s USB port. To change the color mode 1Press the [COLOR MODE] key. zThis displays the color mode selection window. The currently selected color mode is the one whose button...
Page 7
![Page 7
7
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in
its place.
2To resume projection of the image from the input source, press the [BLANK] key
(or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see
“Blank Screen” under “Screen Settings Main Menu” on page 22.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...](http://img.usermanuals.tech/thumb/16/85691/w300_casio-xj-s31-manual_d-6.png "Page 7
7
Momentarily Cutting Off the Input Source Image
1Press the [BLANK] key.
zThis temporarily cuts off the image from the input source and projects a black screen in
its place.
2To resume projection of the image from the input source, press the [BLANK] key
(or [ESC] key).
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see
“Blank Screen” under “Screen Settings Main Menu” on page 22.
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To...")
7 Momentarily Cutting Off the Input Source Image 1Press the [BLANK] key. zThis temporarily cuts off the image from the input source and projects a black screen in its place. 2To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 22. Freezing an Image Pressing the [FREEZE] key freezes the projected image. To...
Page 8
![Page 8
8
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for
display in the projected image. Pointers can be used during a presentation to indicate or
highlight a specific part of the image.
Note
Depending on the pointer style you are usi ng, the pointer may not display properly
when you are using keystone correction. If this happens, use the [KEYSTONE +] and
[KEYSTONE –] keys to change the keystone correction value to...](http://img.usermanuals.tech/thumb/16/85691/w300_casio-xj-s31-manual_d-7.png "Page 8
8
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for
display in the projected image. Pointers can be used during a presentation to indicate or
highlight a specific part of the image.
Note
Depending on the pointer style you are usi ng, the pointer may not display properly
when you are using keystone correction. If this happens, use the [KEYSTONE +] and
[KEYSTONE –] keys to change the keystone correction value to...")
8 Displaying a Pointer in the Projected Image You can select from among eight different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are usi ng, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to...
Page 9
![Page 9
9
Changing the aspect ratio of the projected image
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3
and 16:9.
Note
zThe aspect ratio setting affects the proj ected image only when the input source is
VIDEO or component.
z When the input source is a component signal with an aspect ratio of 16:9, the
aspect ratio switches automatically to 16:9. When this happens, pressing the
[ASPECT] key will not change the aspect ratio.
z You also can change the aspect ratio...](http://img.usermanuals.tech/thumb/16/85691/w300_casio-xj-s31-manual_d-8.png "Page 9
9
Changing the aspect ratio of the projected image
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3
and 16:9.
Note
zThe aspect ratio setting affects the proj ected image only when the input source is
VIDEO or component.
z When the input source is a component signal with an aspect ratio of 16:9, the
aspect ratio switches automatically to 16:9. When this happens, pressing the
[ASPECT] key will not change the aspect ratio.
z You also can change the aspect ratio...")
9 Changing the aspect ratio of the projected image Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3 and 16:9. Note zThe aspect ratio setting affects the proj ected image only when the input source is VIDEO or component. z When the input source is a component signal with an aspect ratio of 16:9, the aspect ratio switches automatically to 16:9. When this happens, pressing the [ASPECT] key will not change the aspect ratio. z You also can change the aspect ratio...
Page 10
![Page 10
10
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
This performs the same operation as pres sing the [BRIGHT] key ( key) described on
page 5.
z Turn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
This performs the same operati on as pressing the [ECO] key (
U key) described on
page 9.
z Select the aspect ratio of the...](http://img.usermanuals.tech/thumb/16/85691/w300_casio-xj-s31-manual_d-9.png "Page 10
10
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
zAdjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
This performs the same operation as pres sing the [BRIGHT] key ( key) described on
page 5.
z Turn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
This performs the same operati on as pressing the [ECO] key (
U key) described on
page 9.
z Select the aspect ratio of the...")
10 Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described below. zAdjust image brightness Highlight “Brightness” and then press the [ENTER] key. This performs the same operation as pres sing the [BRIGHT] key ( key) described on page 5. z Turn the Eco Mode on or off Highlight “Eco Mode” and then press the [ENTER] key. This performs the same operati on as pressing the [ECO] key ( U key) described on page 9. z Select the aspect ratio of the...