Christie Digital Systems Cp2215 User Manual

   Manage Lamp Information
CP2215 User Manual43020-101225-01 Rev. 1 (01-2014)
Add a Lamp to the Lamp History
You cannot remove or modify a lamp after you add it.
1. Tap Menu > Advanced Setup > Lamp History.
2. Tap Add Lamp.
3. Complete these fields:
4. Tap Save.
Verify Current Lamp Intensity
Tap Menu > Advanced Setup > Lamp Power/LiteLOC Setup. 
The current light intensity value appears in the Intensity field.
FieldDescription
Type The lamp type.
Serial Number The lamp serial number.
Reason for Change...

CP2215 User Manual45020-101225-01 Rev. 1 (01-2014)
Manage Projector Setting Files
Advanced, administrator, service, or marriage permissions are required to complete the procedures 
in this section.
Create a Source File
Create source files to store resolution, offset, and aspect ratio settings for input devices.
1. Tap Menu > Advanced Setup > Source File Setup.
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Enter values in these areas:
6. Tap Save.
Modify a Source...

46                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
Manage Projector Setting Files
2. Tap Save As.
3. Enter a name for the source file in the Filename field.
4. Tap OK.
5. Complete these fields:
6. Tap Save.
Modify a Screen File
1. Tap Menu > Advanced Setup > Screen File Setup.
2. Select a screen file in the Current Screen File list.
3. Modify the...

   Manage Projector Setting Files
CP2215 User Manual47020-101225-01 Rev. 1 (01-2014)
10. Enter the chromaticity measurements you recorded in step 7 in the red, green, blue, white, and 
black x and y fields.
11. Tap Save.
Modify a MCGD File
1. Tap Menu > Advanced Setup > MCGD File Setup.
2. Select a MCGD file in the Current Measured (MCGD) File list.
3. Modify the MCGD file settings.
4. Tap Save.
Create a TCGD File
Typically, Target Color Gamut Data (TCGD) file settings are defined by the content provider...

48                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
Manage Projector Setting Files
Create a New ILS File
1. Tap Menu > Advanced Setup > ILS File Setup
The ILS File Setup window is not available if the Enable Automatic ILS option is not selected on 
the Lens Setup window. See Enable Automatic ILS on a Lens on page 49.
2. Tap Save As.
3. Enter a name for...

   Manage Projector Setting Files
CP2215 User Manual49020-101225-01 Rev. 1 (01-2014)
Reset ILS File Settings
You must reset the Intelligent Lens System (ILS) when you move the lens, you have manually 
adjusted horizontal or vertical offset, focus, or zoom or when a power outage occurs during a channel 
change.
1. Tap Menu > Advanced Setup > ILS File Setup.
2. Select an ILS file in the Current ILS File list.
3. Tap Quick Reset.
4. Tap Yes.
Add a Lens Serial Number
1. Tap Menu > Advanced Setup > Lens...

50                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
Manage Projector Setting Files
3. Tap Full Calibration in the Intelligent Lens System area.
4. Tap Yes.
Reset the ILS and the Lens Position
1. Tap Menu > Advanced Setup > Lens Setup.
2. Select a lens in the Primary Lens list.
3. Tap Quick Reset in the Intelligent Lens System area.
4. Tap Yes. 

CP2215 User Manual51020-101225-01 Rev. 1 (01-2014)
Work with the Scheduler
Use the scheduler to schedule when the projector turns on or off. 
Schedule the Projector to Turn On or Off
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Scheduler.
2. Tap Enable Scheduler.
3. Tap and drag the scroll bar to view the available dates.
4. Tap a square below the date and next to the time that you want the projector to turn on or off.
5. Tap New.
6. Tap...

52                                                                                                                                                            CP2215 User Manual020-101225-01 Rev. 1 (01-2014)
Work with the Scheduler
6. Tap Save.
7. Tap OK to return to the calendar view.
Delete a Scheduled Event
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Scheduler.
2. Tap and drag the scroll bar to view the available dates.
3. Tap the event...