Home > Cisco > Switch > Cisco 2960s User Manual

Cisco 2960s User Manual

Add to Favourites
    Download as PDF

    View the Cisco 2960s User Manual for free. All the Cisco manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 1 Catalyst 2960-S Switch Getting Started Guide OL-19793-02 Catalyst 2960-S Switch Getting Started Guide •About This Guide Unpacking the Switch Running Express Setup Managing the Switch Planning and Creating Switch Stacks Rack-Mounting Connecting the FlexStack Cables Connecting to the Switch Ports In Case of Difficulty Obtaining Documentation and Submitting a Service Request
    Page 2 Catalyst 2960-S Switch Getting Started Guide 2 Catalyst 2960-S Switch Getting Started Guide OL-19793-02 About This Guide This guide provides instructions on how to use Express Setup to initially configure your Catalyst switch. It also covers switch management options, basic rack-mounting, stacking guidelines, port and module connection procedures, and troubleshooting help. For additional installation and configuration information for the switch, see the Catalyst 2960 documentation on Cisco.com....
    Page 3 3 Catalyst 2960-S Switch Getting Started Guide OL-19793-02 Catalyst 2960-S Switch Getting Started Guide 1Catalyst 2960-S switch1 1. Catalyst 2960S-48FPD-L switch shown for example. Your switch model might look different. 9Four number-8 Phillips truss-head screws (48-0656-01) 2AC power cord10Four number-8 Phillips flat-head screws (48-0655-01) 3Four rubber mounting feet11Two number-4 pan-head screws (48-0482-01) 4Documentation12One black Phillips machine screw (48-0654-01) 5Two 19-inch mounting...
    Page 4 Catalyst 2960-S Switch Getting Started Guide 4 Catalyst 2960-S Switch Getting Started Guide OL-19793-02 Running Express Setup When you first set up the switch, you should use Express Setup to enter the initial IP information. Doing this enables the switch to connect to local routers and the network. You can then access the switch through the IP address for further configuration. You need this equipment to set up the switch: A PC with Windows 2000, XP, Vista, or Windows Server 2003 installed A...
    Start reading Cisco 2960s User Manual

    Related Manuals for Cisco 2960s User Manual

    All Cisco manuals