Cisco 891 F Manual

 
3-3
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a PC, Server, or Workstation
Connecting a PC, Server, or Workstation
To connect a PC (or other Ethernet devices) to an Ethernet switch port, follow these steps:
Step 1Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router. Figure 3-1 shows 
a Cisco 888W router connected to a PC.
Figure 3-1...

 
3-4
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Phone
Connecting a Phone
To connect an 802.3af-compliant phone to an Ethernet switch port, follow these steps:
Step 1Connect one end of the yellow Ethernet cable to Ethernet switch port 0 or port 1 on the router. Figure 3-2 
shows a Cisco 888W router connected to a phone.
Figure 3-2 Connecting a Phone
Step 2Connect the other...

 
3-5
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting an External Ethernet Switch
Connecting an External Ethernet Switch 
If more than four PCs in an office must be connected to each other, you can add Ethernet connections to 
the router by connecting an external Ethernet switch to the router’s Ethernet switch. 
To connect an external Ethernet switch to an Ethernet switch port on...

 
3-6
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the V.92 modem Port
Connecting the V.92 modem Port
WarningHazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF 
or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, 
detach the end away from the unit first. Statement 1026
For dialup...

 
3-7
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Terminal or PC to the Console Port
Connecting a Terminal or PC to the Console Port
Connect a terminal or PC to the Console Aux port either to configure the software by using the 
command-line interface (CLI) or to troubleshoot problems with the router. 
To connect a terminal or PC to the console port on the router and access...

 
3-8
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting a Modem to the Auxiliary Port
 1 stop bit
 No flow control 
When the terminal emulator establishes communications, the router prompt is displayed.
For more information on terminal emulation settings, see Applying Correct Terminal Emulator Settings 
for Console Connections.
Connecting a Modem to the Auxiliary Port
To connect a...

 
3-9
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the 3G Card
Step 4Make sure that your modem and the router auxiliary port are configured for the same transmission speed 
(up to 115200 bits per second [b/s] is supported) and support mode control with data carrier detect 
(DCD) and data terminal ready (DTR).
Connecting the 3G Card
NoteThe Cisco 880G router does not support...

 
3-10
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the 3G Card
Figure 3-7 Inserting the 3G Card
Step 2Open the top of the anti-theft locking bracket, as shown in Figure 3-8. 
Figure 3-8 Opening the Anti-theft Locking Bracket
13G card with the Cisco logo facing up4Screw holes for locking bracket
23G express card slot5Pin holes for aligning the locking bracket
3Notches on the...

 
3-11
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the 3G Card
Step 3Slide the opened locking bracket under the 3G card. The locking bracket should align with the notches 
on either side of the 3G card, as shown in 
Figure 3-9, and the pins on the locking bracket should be 
inserted into the corresponding holes in the router. 
Figure 3-9 Installing the Locking Bracket
13G...

 
3-12
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Chapter 3      Connecting the Router
  Connecting the 3G Card
Step 4Close the locking bracket, as shown in Figure 3-10.
Figure 3-10 Closing the Locking Bracket
Step 5Insert the screws, as shown in Figure 3-11, and tighten with a number 2 Phillips screwdriver.
Figure 3-11 Inserting the Screws
Step 6To connect the antenna to the 3G card, insert the antenna connector into the...