Cisco Ise 14 User Guide

							dir
TolistafilefromtheCiscoISEserver,usethedircommandinEXECmode.Toremovethisfunction,use
thenoformofthiscommand.
dir
dirdisk:/logs
dirrecursive
Syntax DescriptionDirectoryname.Supportsupto80alphanumericcharacters.Requiresdisk:/
precedingthedirectoryname.
directory-name
(Optional).Listsdirectoriesandfilesinthelocalfilesystem.recursive
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesNone.
Example 1
ise/admin#dirDirectoryofdisk:/2034113Aug05201019:58:39ADElogs.tar.gz4096Jun10201002:34:03activemq-data/4096Aug04201023:14:53logs/16384Jun09201002:59:34lost+found/2996022Aug05201019:11:16mybackup-100805-1910.tar.gz4096Aug04201023:15:20target/4096Aug05201012:25:55temp/Usagefordisk:filesystem8076189696bytestotalused6371618816bytesfree15234142208bytesavailableise/admin#
Example 2
ise/admin#dirdisk:/logs0Aug05201011:53:52usermgmt.logUsagefordisk:filesystem8076189696bytestotalused6371618816bytesfree15234142208bytesavailableise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
63
Cisco ISE CLI Commands in EXEC Mode
dir 
						

							Example 3
ise/admin#dirrecursiveDirectoryofdisk:/2034113Aug05201019:58:39ADElogs.tar.gz4096Jun10201002:34:03activemq-data/4096Aug04201023:14:53logs/16384Jun09201002:59:34lost+found/2996022Aug05201019:11:16mybackup-100805-1910.tar.gz4096Aug04201023:15:20target/4096Aug05201012:25:55temp/Directoryofdisk:/logsDirectoryofdisk:/tempDirectoryofdisk:/activemq-dataDirectoryofdisk:/activemq-data/localhostDirectoryofdisk:/activemq-data/localhost/journalDirectoryofdisk:/activemq-data/localhost/kr-storeDirectoryofdisk:/activemq-data/localhost/kr-store/dataDirectoryofdisk:/activemq-data/localhost/kr-store/stateDirectoryofdisk:/activemq-data/localhost/tmp_storageDirectoryofdisk:/targetDirectoryofdisk:/target/logsDirectoryofdisk:/lost+foundUsagefordisk:filesystem8076189696bytestotalused6371618816bytesfree15234142208bytesavailableise/admin#
Related CommandsDescriptionCommand
delete
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
64
Cisco ISE CLI Commands in EXEC Mode
dir 
						

							exit
TocloseanactiveterminalsessionbyloggingoutoftheCiscoISEserverortomoveuponemodelevelfrom
configurationmode,usetheexitcommandinEXECmode.
Thiscommandhasnokeywordsandarguments.
exit
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Example
ise/admin#configtEnterconfigurationcommands,oneperline.EndwithCNTL/Z.ise/admin(config)#exitise/admin#
Related CommandsDescriptionCommand
end
exit
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
65
Cisco ISE CLI Commands in EXEC Mode
exit 
						

							forceout
ToforceusersoutofanactiveterminalsessionbyloggingthemoutoftheCiscoISEserver,usetheforceout
commandinEXECmode.
forceoutusername
Syntax DescriptionNameoftheuser.Supportsupto31alphanumericcharacters.username
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesUsetheforceoutcommandinEXECmodetoforceauserfromanactivesession.
Example
ise/admin#forceoutuser1ise/admin#
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
66
Cisco ISE CLI Commands in EXEC Mode
forceout 
						

							halt
Toshutdownandpoweroffthesystem,usethehaltcommandinEXECmode.
Thiscommandhasnokeywordsandarguments.
halt
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesBeforeyouissuethehaltcommand,ensurethatCiscoISEisnotperforminganybackup,restore,installation,
upgrade,orremoveoperation.IfyouissuethehaltcommandwhiletheCiscoISEisperforminganyofthese
operations,youwillgetoneofthefollowingwarningmessages:
WARNING:Abackuporrestoreiscurrentlyinprogress!Continuewithhalt?WARNING:Aninstall/upgrade/removeiscurrentlyinprogress!Continuewithhalt?
Ifyougetanyofthesewarnings,enterYestocontinuethehaltoperation,orenterNotocancelthehalt.
IfnoprocessesarerunningwhenyouusethehaltcommandorifyouenterYesinresponsetothewarning
messagedisplayed,thenyoumustrespondtothefollowingquestion:
Doyouwanttosavethecurrentconfiguration?
IfyouenterYestosavetheexistingCiscoISEconfiguration,thefollowingmessageisdisplayed:
Savedtherunningconfigurationtostartupsuccessfully
Examples
Example
ise/admin#haltise/admin#
Related CommandsDescriptionCommand
reload
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
67
Cisco ISE CLI Commands in EXEC Mode
halt 
						

							help
TodisplaytheinteractivehelpsystemfortheCiscoISEserver,usethehelpcommandinEXECmode.
Thiscommandhasnokeywordsandarguments.
help
Command DefaultNodefaultbehaviororvalues.
Command ModesEXECandallConfiguration(config).
Usage GuidelinesThehelpcommandprovidesabriefdescriptionofthecontext-sensitivehelpsystem.
•Tolistallcommandsavailableforaparticularcommandmode,enteraquestionmark(?)atthesystem
prompt.
•Toobtainalistofcommandsthatbeginwithaparticularcharacterstring,entertheabbreviatedcommand
entryimmediatelyfollowedby?.Thisformofhelpiscalledwordhelpbecauseitlistsonlythekeywords
orargumentsthatbeginwiththeabbreviationthatyouentered.
•Tolistthekeywordsandargumentsassociatedwithacommand,enter?inplaceofakeywordorargument
onthecommandline.Thisformofhelpiscalledcommandsyntaxhelp,becauseitliststhekeywords
orargumentsthatapplybasedonthecommand,keywords,andargumentsthatyouenter.
Example
ise/admin#helpHelpmayberequestedatanypointinacommandbyenteringaquestionmark'?'.Ifnothingmatches,thehelplistwillbeemptyandyoumustbackupuntilenteringa'?'showstheavailableoptions.Twostylesofhelpareprovided:1.Fullhelpisavailablewhenyouarereadytoenteracommandargument(e.g.'show?')anddescribeseachpossibleargument.2.Partialhelpisprovidedwhenanabbreviatedargumentisenteredandyouwanttoknowwhatargumentsmatchtheinput(e.g.'showpr?'.)ise/admin#
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
68
Cisco ISE CLI Commands in EXEC Mode
help 
						

							mkdir
TocreateanewdirectoryintheCiscoISEserver,usethemkdircommandinEXECmode.
mkdirdirectory-name
Syntax DescriptionNameofthedirectorytocreate.Supportsupto80alphanumeric
characters.Usedisk:/directory-name.
directory-name
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesUsedisk:/directory-name;otherwise,anerrorappearsthatindicatesthatthedisk:/directory-namemustbe
included.
Example
ise/admin#mkdirdisk:/testise/admin#dirDirectoryofdisk:/4096May06201013:34:49activemq-data/4096May06201013:40:59logs/16384Mar01201016:07:27lost+found/4096May06201013:42:53target/4096May07201012:26:04test/Usagefordisk:filesystem181067776bytestotalused19084521472bytesfree20314165248bytesavailableise/admin#
Related CommandsDescriptionCommand
dir
rmdir
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
69
Cisco ISE CLI Commands in EXEC Mode
mkdir 
						

							nslookup
TolookupthehostnameofaremotesystemintheCiscoISEserver,usethenslookupcommandinEXEC
mode.
nslookup{ip-address|hostname}
nslookup[{ip-address|hostname}name-server{ip-address}]
nslookup[{ip-address|hostname}querytypeAAAA]
Syntax DescriptionIPv4orIPv6addressofaremotesystem.Supportsupto64
alphanumericcharacters.
ip-address
Hostnameofaremotesystem.Supportsupto64alphanumeric
characters.
hostname
QueriestheInternetdomainnameserverforanIPv6addressthat
correspondstoawebsitename.
AAAA
Specifiesanalternativenameserver.Supportsupto64alphanumeric
characters.
name-server
QueriestheIPv4orIPv6addressorhostnameofaremotesystem.It
includesquerytypes,suchasPTR,A,AAAA,andSRV.Supports
upto16alphanumericcharacters.
querytype
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Examples
Example 1
ise/admin#nslookup1.2.3.4Trying"4.3.2.1.in-addr.arpa"Received127bytesfrom171.70.168.183#53in1msTrying"4.3.2.1.in-addr.arpa"Host4.3.2.1.in-addr.arpa.notfound:3(NXDOMAIN)Received127bytesfrom171.70.168.183#53in1msise/admin#
Example 2
ise/admin#nslookupipv6.google.comquerytypeAAAAServer:10.106.230.244Address:10.106.230.244#53Non-authoritativeanswer:ipv6.google.comcanonicalname=ipv6.l.google.com.
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
70
Cisco ISE CLI Commands in EXEC Mode
nslookup 
						

							ipv6.l.google.comhasAAAAaddress2404:6800:4007:803::1001Authoritativeanswerscanbefoundfrom:google.comnameserver=ns4.google.com.google.comnameserver=ns3.google.com.google.comnameserver=ns2.google.com.google.comnameserver=ns1.google.com.ns1.google.cominternetaddress=216.239.32.10ns2.google.cominternetaddress=216.239.34.10ns3.google.cominternetaddress=216.239.36.10ns4.google.cominternetaddress=216.239.38.10ise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
71
Cisco ISE CLI Commands in EXEC Mode
nslookup 
						

							password
ToupdatetheCLIaccountpassword,usethepasswordcommandinEXECmode.
password
Syntax DescriptionEnterthecurrentCLIpassword.Enteroldpassword
EnterthenewCLIpassword.Enternewpassword
ConfirmthenewCLIpassword.Confirmnewpassword
Command ModesEXEC
Example
ise/admin#passwordEnteroldpassword:Enternewpassword:Confirmnewpassword:ise/admin#
Related CommandsDescriptionCommand
password-policy
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
72
Cisco ISE CLI Commands in EXEC Mode
password