Comdial Dxp 2500 Industry-Standard Telephone Instructions Manual

							GCA 70-237 Industry-Standard Telephone User’s Guide 
l To use Tracker to transfer a call to a park orbit for 
r!s 
retrieval and transmit the call’s park orbit code and 
caller ID information (if available), 
1. answer a call, 
2. FLASH the hookswitch, 
3. dial station number of station that is to receive the call, 
4. if the user at the called station does not answer or the 
station is busy, dial Jlc 8, 
5. hear confmation beep (Tracker page accepted) or busy 
tone (Tracker page not accepted), 
6. hang up handset. 
Tracker parked calls will re-ring your station if the called 
party does not respond within a preprogrammed time. You 
can either replace the call into another Tracker page orbit 
or retrieve the call for servicing. 
l To retrieve a call that you parked using the Tracker 
option, 
1. lift handset and FLASH the hookswitch, 
mm 
lift handset, listen for dial tone, and dial # #. 
Industry-Standard Telephone User’s Guide - 21  
						

							22 - lndus try-Standard Telephone User’s Guide 
Responding To Tracker Pager Calls 
l If you receive a parked call message on your Tracker 
pager, 
1. go to any system station, 
2. lift handset and listen for intercom dial tone, 
3. dial the orbit code (#800-#899) displayed on your pager, 
4. retrieve call. :: 
:. : 
:.:. 
l To disable or enable a Tracker pager at your station, 
1. lift handset and listen for intercom dial tone, 
2. dial # 06 to disable, 
mm 
dial # 07 to enable, 
3. hang up handset. 
:” : 
:_.; 
,..., 
22 - lndus try-Standard Telephone User’s Guide  
						

							GCA 70-237 Industry-Standard Telephone User’s Guide 
Camping On At A Station 
:’ IEZ : You can camp on at only one station at a time. 
Camping On At An Idle Station 
And Waiting For An Automatic Callback 
If you call another station and hear ringing but receive no 
answer, you can press a button that will cause the system to 
ring your telephone when the user at the called station initiates 
any telephone activity. 
l To camp on at a station for which you hear ringing but 
receive no answer, 
1. make intercom call and receive no answer, 
2. dial +K 6, 
3. hang up handset. Callback will occur when the user at 
the called station initiates any telephone activity. 
l To cancel the camp-on activity at any time, 
1. lift handset and listen for intercom dial tone, 
2. dial # 6, 
3. hang up handset. 
Industry-Standard Telephone User’s Guide - 23  
						

							24 - Industry-Standard Telephone User’s Guide 
Camping On At a Busy Station 
And Waiting For An Automatic Callback 
If you call another station and receive a busy signal or a Do 
Not Disturb tone, you can press a button that will cause the 
system to ring your telephone when the station is available. 
l To camp on at any busy station, 
1. make intercom call and hear busy signal, 
2. dial % 6, 
3. hang up. When called station becomes idle, your 
telephone will ring with five short tone bursts. 
l To answer callback ring, 
-lift handset and called station will ring. If you do not lift 
the handset, you will cancel the callback. 
l To cancel automatic callback before your telephone 
sounds the tone bursts, 
1. lift handset and listen for intercom dial tone, 
2. dial # 6, 
3. hang up. 
24 - Industry-Standard Telephone User’s Guide  
						

							GCA 70-237 Industry-Standard Telephone User’s Guide 
l To camp on at a station with a Do Not Disturb 
condition set, 
1. make intercom call and hear Do Not Disturb tone, 
2. dial +I+ 6, 
3. hang up. A callback will occur when the riser at the 
called station disables the Do Not Disturb mode. 
l To override a call or a Do Not Disturb condition at 
another telephone (Executive Override), 
1. make intercom call and hear a busy signal, 
2. dial S 03 (all parties will hear several tone bursts), 
3. speak your announcement. 
us This action disables the DND condition at the other 
telephone until the user resets DND. 
Industry-Standard Telephone User’s Guide - 25  
						

							26 - Industry-Standard Telephone User’s Guide 
Camping On At A Busy Station 
And Waiting For An Answer (Call Waiting) 
If the telephone you have called is busy, you can send a 
call-waiting tone to the telephone and wait on line for an 
answer. : 
!k” ” 
: 1 
0 To activate call waiting when you hear a busy signal, 
1. make intercom call and receive busy signal, 
2. dial +t+ 6 (called party hears tone), 
3. wait on line for an answer or hang up and wait for a 
callback when the called telephone becomes idle. 
The called party can place the current call on hold or 
disconnect from the call to answer your call-waiting 
tone, or choose to ignore your call-waiting tone and 
continue current conversation. 
0 To cancel call waiting, 
1. lift handset (if it is on hook) and listen for intercom dial 
tone, 
2. dial # 6. 
. . 
;‘. ,:. ; 
!.. :, 
26 - Industry-Standard Telephone User’s Guide  
						

							._ GCA 70-237 lndus try-standard Telephone User’s Guide 
l To answer a call-waiting tone, 
1. hear short burst in handset receiver, 
2. you may choose to ignore the call-waiting tone and 
remain on line with your original caller, 
complete present call and hang up handset (waiting call 
will begin ringing). Lift handset to answer waiting call. 
l The installer may arrange your telephone so that you 
can flash the hookswitch to answer the waiting call 
without ending your current call. If you have this 
feature, you can answer a waiting call as follows: 
1. hear short tone burst in your handset receiver while on a 
call, 
2. FLASH the hookswitch to receive waiting call and place 
current call on hold, 
3. FLASH the hookswitch when you want to alternate 
between original call and waiting call, 
4. hang up handset to end calls 
Industry-Standard Telephone User’s Guide - 27  
						

							This page remains blank intentionally.  
						

							GCA70-237 Industry-Standard Telephone User’s Guide 
Index 
.:’ 
.- AllCall ................. 17 
Answering Calls .......... 4,5 
Automatic Callback. ....... 23-25 
Broker’s Call. ............ 14 
CallPark.. ............ ..ll 
Call Pickup. ............. 4 
Call Waiting ............. 26,27 
Camping On. ............ 23-27 
Conferencing ............ 14 
Executive Override. ....... 25 
External Paging .......... 17 
Flashing The Hookswitch. .. 3 
Forwarding Calls ......... 18, 19 
Holding Calls ............ 10, 11 
Internal Flash ............ 3 
Introduction 
............. 3 
Last Number 
Redial ....... 7 
LCD Messaging .......... 16 
Making Calls. ............ 5-9 
Meet-Me Page ........... 18 
Messaging.. .......... ..I51 6 
Message Waiting Control. .. 15 
NightMode .............. 5 
Paging ................. 17,18 
Prime Intercom. .......... 3,6-7 
Prime Line Automatic/ 
Idle Line Preference .... 3,5 
Recall/Flash ............. 16 
Screened Transfer. ....... 12 
Speed Dialing. ........... 8,9 
Tracker Pager Calls, 
Responding To ........ 22 
Tracker Pager System ..... 20-22 
Transferring Outside Calls . . 12, 13 
Unscreened Transfer. ..... 13 
Zone Paging ............. 17 
hdustry-Standard Telephone User’s Guide - 29  
						

							Notes 
: