Compaq IPAQ Microportable Projector MP3800 Users Guide

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP3800 User’s Guide3–9
■Management—Allows you to control vertical and horizontal 
keystoning, view the cumulative lamp hours, or set the OSD 
horizontal and vertical position, timeout, and transparency.
✎By default, the OSD menu is on top of the displayed image. 
Selecting OSD Transparency from the Management menu 
allows you to adjust this setting so the displayed image can be 
seen behind the OSD menu. Changes can be seen as they are...

3–10Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the On-Screen Display Menu
■Adjusting—Indicates the Resync button has been pressed or 
the Factory Reset option has been selected from the OSD 
menu. The message will disappear when the appropriate 
mode is detected and displayed by the projector.
■Multiple inputs are active. Use the OSD to select the 
alternate sources—The projector has detected multiple 
inputs. This message may appear when powering up, 
returning from Standby, or when...

Compaq iPAQ Microportable Projector MP3800 User’s Guide4–1
4
Using the Tripod Mount
The Compaq Microportable Projector includes standard tripod 
mount capability on the bottom of the projector. This allows the 
projector to be mounted on tripods readily available at camera 
and other electronic stores.
ÅWARNING: The tripod should be capable of supporting a weight of at 
least five pounds. Refer to the owner’s manual that came with your 
tripod for more information.
ÄCAUTION: Do not overtighten the tripod...

4–2Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Tripod Mount
To connect the projector to the tripod:
1. If necessary, remove the tripod mounting block from the 
tripod.
2. If there is a guide pin on the tripod mounting block, align it 
with the guide pin hole 
1 on the bottom of the projector.
3. Attach the tripod mounting block to the tripod mount hole 
2 
on the bottom of the projector.
281124-001.book  Page 2  Tuesday, April 30, 2002  10:00 AM 

Using the Tripod Mount
Compaq iPAQ Microportable Projector MP3800 User’s Guide4–3
4. Attach the projector and tripod mounting block to the tripod 
according to the tripod manufacturer’s instructions.
✎The projector can also be used in a ceiling-mount application 
using the tripod mount screws.
281124-001.book  Page 3  Tuesday, April 30, 2002  10:00 AM 

Compaq iPAQ Microportable Projector MP3800 User’s Guide5–1
5
Using the Remote Control
The optional remote control has many convenient features. It 
combines some of the functions of the projector buttons with 
some of the functions of the computer mouse.
Before using the remote control, be sure steps 1 through 3 have 
been completed under “Powering On the Projector” in Chapter 2.
281124-001.book  Page 1  Tuesday, April 30, 2002  10:00 AM 

5–2Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Remote Control
Identifying the Remote Control 
Components
Identifying the Remote Control Components
Item Component Function
1Resync button Re-synchronizes the projector with the 
input source
2On-screen Menu button Launches the on-screen display menu
3Enter/Accept button Accepts the current selection and/or 
displays the next OSD menu level
4Zoom in button Zooms in to a specific area on the 
screen
5Page up button Scrolls projected...

Using the Remote Control
Compaq iPAQ Microportable Projector MP3800 User’s Guide5–3
Follow the instructions in the“Adjusting the On-Screen Display 
Menu” section of Chapter 3 to make adjustments to the on-screen 
display menu.
Remote Control Functions
The remote control performs duplicates the functions of the 
projector buttons including adjusting the on-screen buttons.
7Power/Standby button Turns the projector on and off OR 
powers the projector into and out of 
Standby mode
8Source button Selects the...

5–4Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Remote Control
There are two remote control receiver sensors on the projector. 
They are located on the Compaq logo plates on either side of the 
projector. When using the remote control, be sure these sensors 
are not blocked. The remote control will work up to 21.0 feet 
(6.4 meters) from the projector when pointed at one of the 
sensors.
The Page Up and Page Down functions of the remote control will 
not work unless a desktop or...

Compaq iPAQ Microportable Projector MP3800 User’s Guide6–1
6
Using the Home Theater Kit
The Compaq Microportable Projector has been designed to 
integrate video decoding functionality into the projector itself. 
The optional Home Theater kit uses this video decoding 
functionality to offer a complete home theater solution.
The optional Home Theater Kit is not included with the Compaq 
Microportable Projector. For information on purchasing the 
optional Home Theater Kit, call your Compaq authorized dealer...