compaq presario 1100 series mobile pc User Manual

							 
 
Table 1-8. Accessories 
 
 
 
 
 
 
Accessory 
 
 
 
 
 
 
Description 
 
 
Pavilion 
ze5200 
and 
Presario 
2500 
Pavilion 
ze4200, 
Evo 
N1050v, 
and 
Presario 
2100 
 
 
Pavilion 
ze4200 
and 
Presario 
2100 
 
 
Evo 
N1010v 
and 
Presario 
1100 
 
 
 
 
 
Pavilion 
ze4100 
Memory 
F4694-60901 
317434-001 
128MB DDR266B   • • • • 
F4695-60901 
317435-001 
256MB DDR266B   • • • • 
F4696-60901 
317436-001 
512MB DDR266B   • •  • 
Hard Drives 
0950-4193 
319412-001 
HDD-20 GB 9.5mm, Hitachi 
ATA100 • • • • • 
0950-4318 HDD-20 GB 9.5mm, IBM ATA100 
FDB    • • 
0950-4287 HDD-20 GB 9.5mm, TOSH 
ATA100 FDB    • • 
0950-4168 HDD-30 GB 9.5mm, Hitachi 
ATA100    • • 
0950-4162 
319413-001 
HDD-30 GB 9.5mm, IBM (diablo) 
ATA100 • • • • • 
0950-4319 HDD-30 GB 9.5mm, IBM ATA100 
FDB (Cascade)    • • 
0950-4360 HDD-30 GB 9.5mm, TITAN 
Toshiba ATA100 (TITAN)    • • 
0950-4176 HDD-30 GB 9.5mm, Toshiba 
ATA100    • • 
0950-4320 
319414-001 
HDD-40 GB 9.5mm, IBM ATA100 
FDB • • •  • 
0950-4288 HDD-40 GB 9.5mm, Toshiba 
ATA100     • 
319415-001 SPS-DRV HD 60 G (4200 rpm) • • •   
319416-001 SPS-DRV HD 60 G (5400 rpm)  • •   
320692-001 SPS-DRV,HD,80GB,4200RPM  •     
 
Service Manual Product Information 1-25  
						

							 
 
 
 
 
 
 
 
Accessory 
 
 
 
 
 
 
Description 
 
 
Pavilion 
ze5200 
and 
Presario 
2500 
Pavilion 
ze4200, 
Evo 
N1050v, 
and 
Presario 
2100 
 
 
Pavilion 
ze4200 
and 
Presario 
2100 
 
 
Evo 
N1010v 
and 
Presario 
1100 
 
 
 
 
 
Pavilion 
ze4100 
Power 
Options 
F4600-60901 AC-Adapter-Ultraslim Delta 75W 
s/PFC    • • 
F4809-60901 
319411-001 
Battery, LiIon 4.4AHr 8 Cell Li-Ion • • • • • 
8120-6312 
317444-011 
Cord, Pwr, Austr #ABG (2w)   • • • 
8120-6314 Cord, Pwr, Europe #ABB (2w)    • • 
317444-002 SPS-CORD-AC PWR 2  
WIRE-INTL   •   
317444-061 SPS-CORD-AC PWR 2 WIRE-IT   •   
8120-6316 
317444-291 
Cord, Pwr, Japan #ABJ (2w)    • • 
317444-AD1 SPS-CORD-AC PWR 2  
WIRE-KOR   •   
8120-8373 
317444-AA1 
Cord, Pwr, People’s Republic of 
China #AB2 (2w) 
  •   
317444-101 SPS-CORD-AC PWR 2  
WIRE-SWE   •   
317444-111 SPS-CORD-AC PWR 2  
WIRE-SWI   •   
317444-AB1 SPS-CORD-AC PWR 2  
WIRE-TAI   •   
8120-8699 
317444-031 
Cord, Pwr, UK (EPSR) For Hong 
Kong (2w) 
  • • • 
8120-6313 
317444-001 
Cord, Pwr, US #ABA (2w)   • • • 
PC Cards 
F4640-60978 
319468-051 
Card, mini-PCI-802.11B France • • •  • 
F4640-60977 
319468-002 
Card, mini-PCI-802.11B worldwide• • • • • 
Docking 
F4808-60901 Port Replicator Assy   • • • 
F4808-60902 Simple Port Replicator hp/compaq   • • 
1-26 Product Information Service Manual  
						

							 
Internal Design 
The motherboard PCA is the central component of the notebook’s design. It plays a role in virtually 
all system functions. The CPU module and most other subsystems connect to the motherboard. 
The following figure shows the connections among the notebook’s replaceable electronic modules. 
Table 1-9 on page 1-28 lists the roles that these modules play in the notebook’s functional 
subsystems. 
  
 
Figure 1-5. Replaceable Module Diagram 
Service Manual Product Information 1-27  
						

							 
Table 1-9. Functional Structure Description 
Bootup CPU module 
Motherboard  
Hard disk drive  
Floppy drive 
Main processor (MMO). 
Primary system circuitry, system BIOS. 
First source of disk-based startup code. 
Second source of disk-based startup code. 
Processor CPU module 
Motherboard 
Main processor, numeric data processor, L1 and L2 cache. 
Primary system circuitry. 
Memory Motherboard 
SDRAM module 
Video RAM (XE4500). 
Changeable SDRAM (2 slots), video RAM (XE4100). 
Power Battery 
Motherboard 
 
Switchboard PCA 
AC adapter 
Power storage. 
AC adapter socket, reset button, lid switch, power supply, power 
control circuitry. 
Power button 
AC-to-DC converter. 
Display Motherboard 
SDRAM module 
Display assembly 
Graphics controller, video RAM.  
Display output, backlight, power converter for backlight. 
Hard disk Motherboard 
Hard disk drive 
Hard disk controller. 
Hard disk mechanism. 
Floppy drive Motherboard 
Floppy drive 
I/O controller, floppy connector. 
Floppy drive mechanism. 
Keyboard Motherboard 
Switchboard PCA 
Keyboard 
Keyboard BIOS, keyboard controller. 
Power switch, one-touch buttons 
Key switches. 
PS/2 
Touchpad 
Motherboard 
Top case 
Keyboard circuitry, keyboard controller, keyboard BIOS.  
Touch pad sensor, click buttons, controller (PS/2 output). 
Audio Motherboard 
 
Speaker assembly 
Audio controller, audio decoder, speaker amplifier, microphone, 
external audio jacks, headphone amplifier, audio-off switch. 
Speakers. 
Status Motherboard 
Switchboard PCA 
Top case 
LED circuitry, keyboard controller. 
Keyboard LEDs. 
Main status LEDs. 
Serial Motherboard I/O controller, serial connector. 
Parallel Motherboard I/O controller, parallel connector. 
Infrared Motherboard 
IR PCA 
I/O controller. 
Infrared transmitter/receiver. 
PS/2 port Motherboard PS/2 connector, keyboard controller. 
USB Motherboard Bus controller (South Bridge), USB connector. 
S-Video Motherboard I/O controller, S-video connector (certain models). 
Port Replicator Motherboard Port replicator logic, port replicator connector (certain models). 
PCMCIA Motherboard 
PCMCIA socket 
PCMCIA controller. 
PCMCIA connectors. 
Wireless LAN 
(certain models) 
Mini-PCI 
Antenna PCAs 
IR PCA 
I/O controller, radio, radio frequency circuitry. 
Transmit/receive antennas. 
On/off switch, indicator light. 
LAN Motherboard LAN circuitry, bus controller, LAN connector. 
Modem Motherboard Modem circuitry (certain models), modem connector. 
 
1-28 Product Information Service Manual  
						

							 
2 
Removal and Replacement 
This chapter tells you how to remove and replace the notebook’s components and assemblies. The 
items marked by • in the following table are user-replaceable. 
Table 2-1. Removal Cross-Reference 
  
• Assembly, speaker (page 2-12). 
Battery, CMOS (page 2-36). 
• Battery, main (page 2-4). 
• Card, wireless LAN mini-PCI (page 2-6). 
Case, bottom (page 2-34). 
Case, top (page 2-20). 
• Cover, keyboard (page 2-10). 
Assembly, display (page 2-17). 
• Door, mini-PCI (page 2-9). 
• Door, SDRAM (page 2-9). 
Doors, PCMCIA (page 2-34). 
• Drive, CD/DVD (page 2-16). 
 
  
Drive, floppy (page 2-22). 
• Drive, hard disk (page 2-7). 
• Feet, rubber (page 2-9). 
Heatsink (with fan) (page 2-26). 
• Keyboard (page 2-13). 
• Module, SDRAM (page 2-5). 
Module, CPU (page 2-28). 
PCA, antennas (page 2-17). 
PCA, I/R (page 2-24). 
PCA, motherboard (page 2-30). 
PCA, switchboard (page 2-13). 
• Rubber screw plugs, display (page 2-9). 
 
 
Caution 
Always provide proper grounding when performing repairs. Without proper  
grounding, an electrostatic discharge can damage the notebook and its  
components. 
   
Notes 
Reassembly steps are the reverse of the removal steps. Reassembly notes are included at the 
end of each section below. 
Symbols like these are displayed throughout this chapter to show approximate full-size 
screw outlines. You can use these to verify the sizes of screws before you install them. Installing 
a wrong-size screw can damage the notebook. (The symbol at the left represents an M2.5 × 4 mm 
T-head screw.) 
Service Manual Removal and Replacement 2-1  
						

							 
Table 2-2. Required Equipment 
• #0 and #1 Phillips screwdrivers, preferably magnetized. 
• Small flat-blade screwdriver. 
• 5 mm nut driver 
 
Table 2-3. Recommended Screw Torque Values 
Screw Thread Size Torque (cm-kgf) Torque (in-lbf) 
M2 2,0 – 2,5 1.7 – 2.2 
M2.5 (hinges) 3,5 – 4,0 3.0 – 3.4 
M2.5 (other) 2,5 – 3,0 2.2 – 2.6 
M3 2,5 – 3,0 2.2 – 2.6 
Standoff, hex 2,5 – 3,0 2.2 – 2.6 
 
 
2-2 Removal and Replacement Service Manual  
						

							 
Disassembly Flowchart 
The following diagram shows the general “path” you will use when disassembling the notebook to 
access any particular component. 
 
Figure 2-1. Disassembly Flow 
Service Manual Removal and Replacement 2-3  
						

							 
Removing the Battery 
(User-Replaceable) 
Required Equipment 
• None. 
Removal Procedure 
• Slide the battery’s release latch, then pull the battery out of its compartment. 
 
Figure 2-2. Removing the Battery 
2-4 Removal and Replacement Service Manual  
						

							 
Removing a SDRAM Module 
(User-Replaceable) 
The notebook has no system memory built into its motherboard, but has two slots for SDRAM 
modules. One slot contains an SDRAM module that was factory installed. 
 
Note 
HP Pavilion ze5200, ze4200, ze4100, Compaq Evo Notebook N1050v and N1010v, and Presario 
2500, 2100, and 1100 notebooks use only DDR266 SDRAM modules. Using the wrong type of 
module prevents the notebook from booting. 
 
Caution 
Handle the SDRAM module only by its edges and provide proper grounding, or you might damage 
the module through electrostatic discharge. 
 
Required Equipment 
• #1 Phillips screwdriver. 
Removal Procedure 
1. 
2. 
3. 
4. 
Unplug the AC adapter, if present, and then remove the battery. 
On the bottom of the notebook, loosen the captive screws holding the SDRAM door, and then 
remove the door. 
Press outward on the latches at the sides of the SDRAM module to release it (the SDRAM module 
pops up). 
Carefully pull the SDRAM module out of the connector. 
  
 
Figure 2-3. Removing an SDRAM Module 
Reassembly Notes 
• Carefully press the SDRAM module into the connector at an angle of about 30°, until it is fully 
inserted. Then press down on both sides of the SDRAM module until the latches snap closed. 
Service Manual Removal and Replacement 2-5  
						

							 
Removing the Wireless LAN Mini-PCI Card 
(User-Replaceable) 
Certain notebooks include a wireless LAN mini-PCI card under the mini-PCI door on the bottom of the 
notebook. 
Caution 
Handle the Mini-PCI card only by its edges and provide proper grounding, or you might damage 
the card through electrostatic discharge. 
 
Required Equipment 
• #0 Phillips screwdriver. 
Removal Procedure 
1. 
2. 
Unplug the AC adapter, if present, and then remove the battery. 
On the bottom of the notebook, loosen the captive screws holding the Mini-PCI door, and then 
remove the door.  
Caution 
Be careful when connecting and disconnecting the antenna cables from the mini-PCI card. 
Damaged cables or connectors can degrade notebook performance. 
 
3. 
4. 
5. 
Disconnect the two antenna cables from the mini-PCI card. 
Press outward on the latches at the sides of the mini-PCI card to release it (the mini-PCI card 
pops up). 
Carefully pull the mini-PCI card out of the connector. 
  
 
Figure 2-4. Removing the Mini-PCI Card 
Reassembly Notes 
• Carefully press the mini-PCI card into the connector at an angle of about 30°, until it is fully 
inserted. Then press down on both sides of the mini-PCI card until the latches snap closed. 
2-6 Removal and Replacement Service Manual