compaq prosignia 150 User Manual

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Fan Assembly
To remove the fan 
gasket, pull it away 
from the fan.
IMPORTANT: When 
replacing 
the fan 
assembly 
ensure 
the 
arrow 
(located 
on the 
top of 
the fan 
gasket) 
is 
pointing 
inward.
 
To replace the fan 
assembly and gasket, 
reverse the previous 
procedures.
Return to...

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Removing CPU Cover
  
 
8. Remove four 
screws located on the 
top of the Upper CPU 
cover. 
9. Lift the Upper CPU 
cover off the snaps 
on the chassis which 
will disconnect the 
power switch from 
the connector on the 
system board. 
To replace the Upper 
CPU cover, reverse 
the...

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Display Panel Assembly
  
 
7. Disconnect the 
diplay panel 
assemblys flex data 
cable 
 from the
Low Voltage 
Differential Signal 
(LVDS) connector the 
on the system board. 
8. Remove the 
display panel 
assemblys flex data 
cable from the 
LVDS connector.
Next Step
 
 
Revised:...

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Display Panel Assembly
 
9. Close the display 
panel assembly and 
push back on top of the 
hinge covers 
 and lift
up from the bottom 
edge of the hinge covers
 to remove the covers
off the chassis.
IMPORTANT: Carefully 
remove 
the 
display 
panel 
assembly 
hinge 
covers.
 
Next Step...

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Display Panel Assembly
 
   
10. Support the back 
of the display panel 
assembly and remove 
two screws from each 
of the display panel 
hinges.
Next Step
 
Revised: September 16, 1999 

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Display Panel Assembly
11. Remove the connector
 on the end of the display
flex cable 
.
IMPORTANT: Compaq 
recommends 
replacing 
the LVDS 
interface 
connector 
on the 
display flex 
cable after 
removing.
 
CAUTION:
  The
connector on the 
end of the flex cable 
must be removed...

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Modem
 
6. Disconnect the 
modem cable from 
the modem. 
To replace the 
modem, reverse the 
previous procedures.
Return to  Removal &
Replacement Index
Page.
 
Revised: September 16, 1999 

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
CD or DVD Drive
  
 
6. Remove two 
screws from the base 
enclosure which 
secure the DVD or CD 
drive to the chassis.
Next Step
 
Revised: September 16, 1999 

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
CD or DVD Drive
  
 
7. Disconnect the 
DVD or CD drive 
cable from the DVD 
or CD drive and 
remove the DVD or 
CD drive from the 
chassis. 
To replace the DVD 
or CD drive, reverse 
the previous 
procedures.
Return to  Removal &
Replacement Index
Page.
 
 
 
Revised: September 16, 1999 

MAINTENANCE & SERVICE GUIDE
for Prosignia 150 Series Computer
Index PagePreface -or- NoticeSpecificationsBattery Pack
Product DescriptionIllustrated Parts CatalogTroubleshootingRemoval & Replacement
Removal & Replacement
Hard Drive
 
5. Disconnect the 
hard drive data cable 
from the hard drive 
and remove from the 
chassis.
Next Step
 
Revised: September 16, 1999