Home > Corbin > Firearms accessories > Corbin LTFB-4-H Die Set Instructions Manual

Corbin LTFB-4-H Die Set Instructions Manual

Add to Favourites
    Download as PDF

    View the Corbin LTFB-4-H Die Set Instructions Manual for free. All the Corbin manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 How to Swage Bullets Using The LTFB-4-H Die Set 1 2 3 4 6 57Type -H dies fit into the ram of the Corbin Mega-Mite manual (CSP-2), the Hydro, Jr. (CSP-2H) press, and the Corbin Hydro-Press (CHP-1). The 4-die set consists of a CORE SWAGE (CSW--1-H), a CORE SEAT(CS-1-H), a POINT FORM (PF-1-H) die, and a LEAD TIP (LT-1-H) die, each with one internal and one external punch. The external punch (1) is held in the floating punch holder (2), which comes with the press. A threaded bushing (3) is removed from the...
    Page 2 The first die is the CORE SWAGE (CSW-1-H). It is used to form a piece of lead to precise di- ameter, length and weight. You can use cut lead wire, or a cast lead core. Apply a small amount of Corbin Swage Lube to the cores as you handle them. There are three bleed holes through the sides of the die, and its punches are very close fits to the die bore. They are the small- est punches in the set and only fit this die properly. For power presses, set the bottom sensor so the pressure stops (red LED on the...
    Start reading Corbin LTFB-4-H Die Set Instructions Manual

    Related Manuals for Corbin LTFB-4-H Die Set Instructions Manual

    All Corbin manuals