Creative Itrigue 21 3300 Manual

							
Getting Started   6 
Getting Started
DO NOT connect your Receiver to your computer until you have installed the 
software.
Step 1: Install Software
1. Turn on your computer and make sure  your wireless router or access point 
is set up and working properly.
2. Insert the Installation CD in to your CD-ROM/DVD-ROM drive.
The disc supports Windows Auto play mode and starts running 
automatically. If not, you need to  enable the Windows auto-insert 
notification feature for your CD-ROM/DVD-ROM drive. For more 
information, see Installation and Configuration on page 41.
• If your wireless router or  access point can be configured as a DHCP server, enable 
this feature. This makes it easier to add  other devices to your wireless network.
 If you are setting up multiple  Receivers, make sure you set them up one at a time. 
						

							
Getting Started   7
3.For Windows XP only:  When the Hardware Installation error message 
appears, click the  Continue Anyway  button
4. Follow the onscreen instructions to  complete the installation, and restart 
your computer when you are prompted to do so.
For more information about this  message, see Why does a Hardware Installation error 
message appear on a  Windows XP operating system during  installation? on page 42. 
						

							
Getting Started   8 
Step 2: Configure Hardware
If there are multiple wireless networks operating in the vicinity, or your 
wireless network is WEP encrypted,  you will need to configure your 
hardware.
If not, you can skip the following instru ctions and proceed to Step 3: Add 
Tracks to PC Music Library on page 13.
1. When your computer restarts, connect  your Receiver to your computer’s 
USB port using the supplied USB cable. 
						

							
Getting Started   9
2. Connect your Receiver to a power outlet using the supplied power adapter\
, and turn on the power outlet if necessary.
3. Click  Start -> Programs  or All Programs  -> Creative  -> Sound Blaster 
Wireless Music  -> Network Setup . 
						

							
Getting Started   10 
4. In the Sound Blaster  Wireless Music Network Setup — Network  dialog 
box, click a network from the list of  available networks, and click the Next 
button.
If your network is not listed, click the  Scan button to refresh the list of 
available networks, or click to select the  Use this SSID check box and type 
in the SSID of the network you want to connect to. 
						

							
Getting Started   11
5. If your network is WEP encrypted, type in the encryption information in 
the  Sound Blaster  Wireless Music Network Setup — Encryption  dialog 
box, and click the  Next button. Refer to the User’s Guide of your wireless 
router or access point to learn how  to check your network’s encryption 
information.
If your network is WEP enable d, make sure it is in Open mode.  Share Key  mode is not 
supported by Sound Blaster Wireless Music. 
						

							
Getting Started   12 
6. In the Sound Blaster  Wireless Music Network Setup — IP Settings  
dialog box, click the  Obtain an IP address automatically  option. If you 
prefer to use a static IP address for your Receiver, click the  Use the 
following IP address  option and type in values that match those of your 
wireless network.
7. Click the  Next button.
8. Click the  OK button. If your settings are inco mpatible with those of your 
network, Wireless Music Network Setup will return to the first setup page 
so that you can select the correct settings.
9. Follow the onscreen instructions, an d disconnect your Receiver when you 
are prompted to do so.
For more information on using  a static IP address for you Receiver, see How do I use a static IP for my Receiver? on page 44. 
						

							
Getting Started   13
Step 3: Add Tracks to PC Music Library
1. Creative MediaSource Player/Organizer should automatically launch when your computer restarts after installation. To manually launch Creative 
MediaSource Player/Organizer, click  Start -> Programs  or All Programs  
->  Creative  -> Creative MediaSource Player/Organizer .
2. If you are not already in Creative MediaSource Organizer, click the  Player/
Organizer View  button.
3. On the  Ta s k  b a r, click the  Import button, and select  Import Tracks.
The  Import Wizard  dialog box appears.
4. In the  My Computer:  panel, locate the ripped or downloaded music files 
that you want to add to the PC Music Library.
5. Click a folder to display the tracks in it . The list of tracks is displayed in the 
panel beneath the  My Computer: panel.
6. To add a track, select it from the panel beneath the  My Computer: panel 
and click the  Add File-> button.
7. To add a folder, select it from the  My Computer: panel and click the  Add 
Folder ->  button.
A list of tracks is displayed in the  Files to be imported panel.
8. Click the  Continue button.
9. Follow the onscreen instructions to  finish adding tracks to the PC Music 
Library.
For information on ripping  and downloading music files,  see About Music Files on 
page 39. 
						

							
Getting Started   14 
Step 4: Set up Receiver
1. Decide where you would like to place your Receiver. For optimum 
performance, make sure your Receiver is  placed on a flat surface that is at 
least 50 cm (20 inches) from the fl oor, and where there is minimum 
obstruction between your Receiver a nd your wireless router or access 
point.
2. Attach the stand to the Receiver (optional). 
						

							
Getting Started   15
3. Connect your Receiver to speakers or a home stereo system (both availab\
le separately) as shown in the diagrams below.
Connecting to speakers
You can connect speakers to  either the LINE OUT  jacks or the  OPTICAL 
OUT  connector of your Receiver.
RCA-to-miniplug cable
Audio input jack of
2 or 2.1 channel
speakers
Optical cable 
(available separately)
Optical input
connector of 2 or 2.1
channel speakers