D-Link Dir 600m Instalation Manual

11
D-Link DIR-600 User Manual
Section 2 - Installation
If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below: 1.   Place the router in an open and central location. Do not plug the power adapter into the router. 
2.   Turn  the  power  of  on  your  modem.  If  there  is  no  on/of  switch,  then  unplug  the  modem’s  power  adapter.  Shut  down 
your computer.
3.   Unplug  the  Ethernet  cable  (that  connects  your  compute r  to  your  modem)  from  your...

12
D-Link DIR-600 User Manual
Section 2 - Installation
If  you  are  connecting  the  D-Link  router  to  another  router  to  use  as  a  wireless  access  point  and/or  switch,  you  will  have  
to do the following before connecting the router to your network: • Disable UPnP ™
• Disable DHCP 
•  Change  the  LAN  IP  address  to  an  available  address   on  your  network.  The  LAN  ports  on  the  router  canno t 
accept a DHCP address from your other router.
To connect to another router, please...

13
D-Link DIR-600 User Manual
Section 2 - Installation
6.   Disconnect the Ethernet cable from the router and reconnect your computer to your network. 
7.  Connect  an  Ethernet  cable  in  one  of  the  LAN  ports  of  the  router  and  connect  it  to  your  other  router.  Do  not  plug 
anything into the WAN port of the D-Link router. 
8.   You  may  now  use  the  other  three  LAN  ports  to  connect  other  Ethernet  devices  and  computers.  To  conigure  your 
wireless  network,  open  a  web...

14
D-Link DIR-600 User Manual
Section 3 - Coniguration
Conguration
This  section  will  show  you  how  to  configure  your  ne w  D-Link  wireless  router  using  the  web-based  config uration 
utility.
Web-based Conguration Utility
To  access  the  coniguration  utility,  open  a  web-brow ser 
such  as  Internet  Explorer  and  enter  the  IP  address  of 
the router (192.168.0.1). 
Enter  the  user  name  (admin)  and  your  password.  Leave  
the password blank by default. 
If  you  get  a  Page฀...

15
D-Link DIR-600 User Manual
Section 3 - Coniguration
Setup฀Wizard
You  may  run  the  setup  wizard  from  the  opening  
Internet  Setup  window  to  quickly  set  up  your  router. Click  Internet  Connection  Setup฀ Wizard ,  you  will 
be directed  to the irst window of the wizard.
Click  Next to continue.
Create  a  new  password  and  then  click  Next  t o 
continue.    

16
D-Link DIR-600 User Manual
Section 3 - Coniguration 
Select  your  time  zone  and  NTP-ser ver  from  the  drop- down  menu 
and then click  Next to continue.
Select  the  type  of  Internet  connection  you  use  and  then  click  Next 
to continue.
If  you  selected  Dynamic,  you  may  need  to  enter  the  MAC  address  of  the  
computer that was last connected directly to your modem. If you are currently 
using  that  computer,  click  Clone Your  PC’s  MAC  Address   and  then  click 
Next  to...

17
D-Link DIR-600 User Manual
Section 3 - Coniguration
If  you  selected  PPPoE,  enter  your  PPPoE  username  an d  password.  Click 
Next  to continue.
Select  Static  i f   yo u r   I S P   a s s i gn e d   yo u   t h e   I P   a d d re s s,   s u b n e t   m a s k , 
gateway, and DNS server addresses.
Note: Make  sure  to  remove  your  PPPoE  software  from  your  c omputer.  The 
software is no longer needed and will not work through a router.
I f   yo u   s e l e c te d   P P T P,   e nte r   yo...

18
D-Link DIR-600 User Manual
Section 3 - Coniguration 
If  you  selected  Static,  enter  your  network  settings  supplied  by  your  Internet  
provider. Click  Next to continue.
Click  Connect  to save your settings.  
Please  allow  1-2  minutes  for  rebooting.  When  the  ro uter  has  finished 
rebooting, the opening window will be displayed.    

19
D-Link DIR-600 User Manual
Section 3 - Coniguration
Enter the IP address assigned by your ISP. 
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP. 
Th e   d e f a u l t   MAC   Ad d re s s   i s   s e t   to   t h e   WA N’s   p hys i c a l 
interface  MAC  address  on  the  Broadband  Router.  It  i s  not 
recommended  that  you  change  the  default  MAC  address  
unless required by your ISP. 
Th e   d e f a u l t   MAC   a d d re s s   i s   s e t   to   t h e...

20
D-Link DIR-600 User Manual
Section 3 - Coniguration
The  Host  Name  is  optional  but  may  be  required  by  so me 
ISPs.  The  default  host  name  is  the  device  name  of  t he 
Router and may be changed. 
Th e   d e f a u l t   MAC   Ad d re s s   i s   s e t   to   t h e   WA N’s   p hys i c a l 
interface  MAC  address  on  the  Broadband  Router.  It  i s  not 
recommended  that  you  change  the  default  MAC  address  
unless required by your ISP. 
Th e   d e f a u l t   MAC   a d d re s s...