D-Link Dir 600m Instalation Manual

							41
D-Link DIR-600 User Manual
Section 3 - Coniguration
To  use  the  Universal  Plug  and  Play  (UPnP ™
) 
f e a t u r e   t i c k   t h i s   c h e c k b o x .   U P N P   p r o v i d e s  
compatibility with networking equipment, software 
and peripherals. 
Unchecking  the  box  will  not  allow  the  DIR-600  to  
respond  to  Pings.  Blocking  the  Ping  may  provide 
s o m e   e x t r a   s e c u r i t y   f r o m   h a c k e r s .   T i c k   t h i s 
checkbox to allow the WAN port to be “Pinged”. 
You  may  set  the  port  speed  of  the  WAN  port  to  
10Mbps,  100Mbps,  or  10/100Mbps  Auto .  Some 
older  cable  or  DSL  modems  may  require  you  to 
set the port speed to 10Mbps.
QSU Vle UPnP:
Enable WAN
 Ping Respond:
WAN Port Speed:
Advanced฀Network
This  window  allows  you  to  change  the  LAN  settings.  Pl ease  be  aware  that  any  changes  to  the  factory  default  settings 
may afect the behavior of your network.  
						

							42
D-Link DIR-600 User Manual
Section 3 - Coniguration
Ti c k   t h i s   c h e c k b ox   to   e n a b l e   o r   d i s a b l e   f i xe d  
routes to deined destinations. 
Use  the  drop-down  menu  to  choose  the 
WAN  or 
WAN  (Physical  Port)
  Interface  the  IP  packet  must 
use to transit out of the Router.
The  IP  address  of  the  packets  that  will  take  this  
route. 
The  subnet  of  the  IP  address  of  the  packets  that  
will take this route. 
Speciies  the  next  hop  to  be  taken  if  this  route  is  
used. 
XYZ [le:
Interface:
Destination:
Subnet Mask: Gateway:
Routing
This option allows you to deine ixed routes to deined destinations.  
						

							43
D-Link DIR-600 User Manual
Section 3 - Coniguration
Enter a new Login Name for the Administrator account. 
Enter  a  new  password  for  the  Administrator  Login  Na me 
and  then  retype  the  new  password  in  the  Conirm  Password  
t e x t b o x .   T h e   a d m i n i s t r a t o r   c a n   m a k e   c h a n g e s   t o   t h e 
settings. 
Remote  management  allows  the  DIR-600  to  be  conigure d 
f ro m   t h e   I n t e r n e t   b y   a   we b   b row s e r.   A   u s e r n a m e   a n d  
password  is  still  required  to  access  the  Web-Manage ment 
inter face.  In  general,  only  a  member  of  your  networ k  can 
browse  the  built-in  web  pages  to  per form  Administra tor 
tasks.  This  feature  enables  you  to  per form  Administ rator 
tasks from the remote (Internet) host. 
The  Internet  IP  address  of  the  computer  that  has  ac cess  to 
the  Broadband  Router.  If  you  input  an  asterisk  (*)  into  this 
ield,  then  any  computer  will  be  able  to  access  the  R outer.  Putting  an  asterisk  (*)  into  this  ield  would present  a  security  risk 
and is not recommended.
The  port  number  used  to  access  the  DIR-600.  For  example:  h ttp://x.x.x.x:8080  whereas  x.x.x.x  is  the  WAN  IP  address  of 
the DIR-600 and 8080  is the port used for the Web-Management interface.
\ ]^_` _abc db ec
Login Name:
Administrator  Password:
Enable Remote  Management:
IP Allowed to  Access:
Port:
Device฀Administration
This window will allow you to change the Administrator password. You can also enable Remote Management.    
						

							44
D-Link DIR-600 User Manual
Section 3 - Coniguration
Save฀and฀Restore
U s e   t h i s   o p t i o n   t o   s a v e   t h e   c u r r e n t   r o u t e r  
coniguration settings to a ile on the hard disk of the 
computer you are using. First, click the  Save button. 
You  will  then  see  a  ile  dialog,  where  you  can  select 
a location and ile name for the settings.  
Use  this  option  to  load  previously  saved  router  
configuration  settings.  First,  use  the  Browse 
control to ind a previously save ile of coniguration 
settings. Then, click the  Upload Settings button to 
transfer those settings to the Router.  
This  option  will  restore  all  configuration  settings  
back  to  the  settings  that  were  in  efect  at  the  time 
the router was shipped from the factory. Any settings 
that  have  not  been  saved  will  be  lost,  including  any 
rules  that  you  have  created.  If  you  want  to  save  the 
current  router  coniguration  settings,  use  the  Save 
button above.  
Click  the  Reboots  button  on  the  left  side  of  the 
window to restart the Router.
fgve฀Settings฀
to Local Hard  Drive:
Load Settings  from Local 
Hard฀Drive:
Restore to 
Factory฀Default฀ Settings:
Reboots:
This  window  allows  you  to  save  your  coniguration  ile  to  a  hard  drive,  load  coniguration  settings  from  a  hard  drive,  
and restore the Router’s factory default settings.  
						

							45
D-Link DIR-600 User Manual
Section 3 - Coniguration
Firmware Update
Click  the  Check  Now   button  (or  the  link  at  the  top 
of  the  window)  to  find  out  if  there  is  an  updated  
irmware;  if  so,  download  the  new  irmware  to  your 
hard drive. 
Af ter  you  have  downloaded  the  new  fir mware,  click  Browse   in  this  window  to  locate  the  irmware 
update  on  your  hard  drive.    Click  Save฀ Settings  to 
complete the irmware upgrade.
h ij kl mj n
Upgrade:
Browse:
You  can  upgrade  the  irmware  of  the  Router  here.  Mak e  sure  the  irmware  you  want  to  use  is  on  the  local hard  drive  of 
the  computer.  Click  on  Browse  to  locate  the  irmware  ile  to  be  used  for  the  updat e.  Please  check  the  D-Link  support 
site  for  irmware  updates  at  http://support.dlink.com.   You  can  download  irmware  upgrades  to  your  hard  drive   from  the 
D-Link support site.  
						

							46
D-Link DIR-600 User Manual
Section 3 - Coniguration
DDNS฀Setting
Tick  the  Enable  DDNS  checkbox  to  enable  support  
for DDNS. 
Select  one  of  the  DDNS  registration  organizations  
form  those  listed  in  the  pull-down  menu.  Available 
servers  include  dlinkddns.com(Free),  DynDns.
org(Custom),  Dyn.Dns.org(free),  and  Dyn.Dns.
org(Static). 
Enter the host name of the DDNS server.
Enter  the  username  given  to  you  by  your  DDNS  
server. 
Enter  the  password  or  key  given  to  you  by  your  
DDNS server.
opq rle฀DDNS: Server฀
Address:
Host Name: Username:
Password:
The  router  supports  DDNS  (Dynamic  Domain  Name  Service).  The  Dynamic  DNS  service  allows  a  dynamic  public  IP  
address  to  be  associated  with  a  static  host  name  in  any  of  the  many  domains,  allowing  access  to  a  speciied  host  from 
various  locations  on  the  Internet.  This  is  enabled  to  allow  remote  access  to  a  host  by  clicking  a  hyperlinked  URL  in  the 
form “hostname.dyndns.org”.  Many  ISPs  assign  public  IP  addresses  using  DHCP,  this  can  make  it  difficult  to  locate 
a  speciic  host  on  the  LAN  using  standard  DNS.  If  fo r  example  you  are  running  a  public  web  server  or  VP N  server  on 
your  LAN,  this  ensures  that  the  host  can  be  located  f rom  the  Internet  if  the  public  IP  address  changes.  DD NS  requires 
that an account be setup with one of the supported DDNS providers.  
						

							47
D-Link DIR-600 User Manual
Section 3 - Coniguration
System Check
VCT  is  an  advanced  feature  that  integrates  a  
LAN  cable  tester  on  ever y  Ethernet  port  on  the 
router.  Through  the  graphical  user  interface 
(G U I ) ,   V C T   c a n   b e   u s e d   to   re m o te l y   d i a gn o s e 
and  repor t  cable  faults  such  as  opens,  shor ts, 
swaps,  and  impedance  mismatch.  This  feature 
significantly  reduces  service  calls  and  returns  by 
allowing  users  to  easily  troubleshoot  their  cable 
connections. 
The  Ping  Test  is  used  to  send  Ping  packets  to  
test  if  a  computer  is  on  the  Internet.  Enter  the  IP 
Address that you wish to Ping, and click  Ping.
stutual Cable 
Tester (VCT)  Info:
Ping Test:
This  tool  is  used  to  verify  the  physical  connectivity  on  both  the  LAN  and  the  WAN  interfaces.  The  Ping  Test  can  be  
used to test the status of the Internet.  
						

							48
D-Link DIR-600 User Manual
Section 3 - Coniguration
Schedules
Enter a name for the new schedule rule. 
C h o o s e   t h e   d e s i re d   d ay ( s ) ,   e i t h e r   A l l   We e k   o r  
Select  Days.  If  the  latter  is  selected,  please  use  the 
checkboxes  directly  below  to  specify  the  individual 
days. 
Tick  this  check  box  if  the  new  schedule  rule  applies  
to the full 24-hour period. 
If  the  new  schedule  rule  does  not  apply  to  the  full  
24-hour  period,  untick  the  previous  checkbox  and 
then enter a speciic beginning and ending time. 
v w xy z
Day(s):
All฀Day฀-฀24฀hrs: Start Time/End Time:
The  Router  allows  the  user  the  ability  to  manage  sc hedule  rules  for  various  irewall  and  parental  control  features  on 
this  window.  Once  you  have  inished  coniguring  the  new  schedule  rule,  click  the  Save฀ Settings  button  at  the  top  of 
the window.   
						

							49
D-Link DIR-600 User Manual
Section 3 - Coniguration
Log Settings
Click  on  the  Save  button  link  on  this  window  to 
save the log ile to your local hard drive. 
click  the  checkbox  to  save  the  log  in  the  log  server  
in the LAN side. 
Click the checkbox(es) of the type of log information  
requested:  “System, Firewall & Security, Router 
Status, Critical, Warning and Information” 
Enter  the  your  SNTP  server  name(or  IP  address)  
and  enter  your  mail  address  before  sending  your 
system log by mail.
{|ve฀Log฀File:
Syslog฀Server: Log Type &  Level:
Send by Mail:
The  system  log  displays  chronological  event  log  data  speciied  by  the  router  user.  You  may  also  save  a  simple  text  ile  
containing the log to your computer. Click the  Save button and follow the prompts to save the ile.  
						

							50
D-Link DIR-600 User Manual
Section 3 - Coniguration
Device฀Info
T h i s   w i n d o w   d i s p l a y s   t h e   c u r r e n t   i n f o r m a t i o n   f o r   t h e   D I R - 6 0 0 .   I t   w i l l   d i s p l a y   t h e   L A N ,   WA N ,   a n d   Wi r e l es s 
information. 
If  your  WAN  connection  is  set  up  for  a  Dynamic  IP  address  then  a  DHCP Release   button  and  a  DHCP Renew   button 
will be displayed. Use  DHCP฀Release to disconnect from your ISP and use  DHCP฀Renew to connect to your ISP. 
If  your  WAN  connection  is  set  up  for  PPPoE,  a  Connect  button  and  a  Disconnect  button  will  be  displayed.  Use 
Disconnect  to drop the PPPoE connection and use  Connect to establish the PPPoE connection.
Displays  the  MAC  address  and  the  private  (local)  
IP settings for the router. 
D i s p l a y s   t h e   M A C   a d d r e s s   a n d   t h e   p u b l i c   I P  
settings for the router. 
D i s p l a y s   t h e   w i r e l e s s   M A C   a d d r e s s   a n d   y o u r  
wireless  settings  such  as  SSID,  Channel,  and 
Encryption status.
}~  €
WAN:
Wireless   802.11N: