D-Link Dir655 B1 Manual

							7D-Link DIR-655 User Manual
Section 2 - Installation
Before you Begin
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area 
such as a closet, cabinet, or in the attic or garage. 
Please configure the router with the computer that was last connected directly to your modem. Also, you can only use the Ethernet port on your 
modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect 
an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change 
connection types (USB to Ethernet). 
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 
from your computer or you will not be able to connect to the Internet.  
						

							8D-Link DIR-655 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your 
wireless  network.  Keep  in  mind  that  the  number,  thickness  and  location  of  walls,  ceilings,  or  other  objects  that  the  wireless  signals  must  pass 
through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or 
business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling 
can  reduce  your  adapter’s  range  from  3-90  feet  (1-30  meters.)  Position  your  devices  so  that  the  number  of  walls  or  ceilings  is 
minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be 
almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will 
travel straight through a wall or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position 
access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects 
such  as  glass,  steel,  metal,  walls  with  insulation,  water  (fish  tanks),  mirrors,  file  cabinets,  brick,  and  concrete  will  degrade  your 
wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your 
wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your 
wireless devices as possible. The base transmits a signal even if the phone in not in use.  
						

							9D-Link DIR-655 User Manual
Section 3 - Configuration
Note: It is recommended to write down the SSID and Security Key, followed by the login password on the provided CD holder.
Configuration
There are several different ways you can configure your router to connect to the Internet and connect to your clients:
• Quick Router Setup Wizard - Insert the supplied CD and launch the setup wizard (see below).
• D-Link Setup Wizard - This wizard will launch if you do not run the CD wizard and log into the router for the first time. Refer 
to page 12.
• Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 18.
• QRS Mobile app - Download the QRS Mobile app on your iPhone, iPad, or Android mobile device and set up your router. 
Refer to the next page.
To run the Quick Router Setup Wizard, insert the CD in the CD-ROM drive. When the 
autorun screen appears, click English (or French), and then click the Install button. 
Note: If the CD Autorun function does not automatically start on your computer, go to Start > 
Run. In the run box type D:\autorun.exe (where D: represents the drive letter of your CD-ROM 
drive).
Quick Router Setup Wizard (CD)
When the Wizard appears, select your language from the drop-down menu and then click Next to continue. Follow the on-screen 
instructions to configure your router. Once you are finished, you may skip to page 18 and will be able to log into the web-based 
configuration utility and configure more advanced features.  
						

							10D-Link DIR-655 User Manual
Section 3 - Configuration
QRS Mobile App
D-Link offers an app for your iPad, iPod Touch, or iPhone (iOS 4.3 or higher) to install and configure your router. 
1. Scan the bar code to download “QRS Mobile” app from the 
app store to your iPhone or iPad.
2. From your mobile device, click Settings. Then, click Wi-Fi.
3. Select the default network “dlink”.
Settings  
						

							11D-Link DIR-655 User Manual
Section 3 - Configuration
4. Once it connected, click on the QRS Mobile icon.
5. Click Start to continue. 
6. Follow the instruction and click Next to continue.
7. Once  the  Setup  is  complete,  the  following  screen  will  show  up. 
Then,  select  your  new Wi-FI  Name  and  enter  the  password  you 
just setup from your laptop or mobile device.  
						

							12D-Link DIR-655 User Manual
Section 3 - Configuration
If you did not run the setup wizard from the CD and this is the first time logging 
into the router, this wizard will start automatically. 
This  wizard  is  designed  to  guide  you  through  a  step-by-step  process  to 
configure your new D-Link router and connect to the Internet.
Click Next to continue. 
Quick Setup Wizard
If this is your first time installing the router, open your web browser. You will 
automatically be directed to the Wizard Setup Screen. 
If you have already configured your settings and you would like to access 
the configuration utility,  please refer to page 18.  
						

							13D-Link DIR-655 User Manual
Section 3 - Configuration
Please wait while your router detects your internet connection type. If the router 
detects your Internet connection, you may need to enter your ISP information such 
as username and password.
If  the  router  does  not  detect  a  valid  Ethernet  connection  from  the  Internet  port, 
this screen will appear. Connect your broadband modem to the Internet port and 
then click Try Again.
If the router detects an Ethernet connection but does not detect the type of Internet 
connection you have, this screen will appear. Click Guide me through the Internet 
Connection Settings to display a list of connection types to choose from.  
						

							14D-Link DIR-655 User Manual
Section 3 - Configuration
Select your Internet connection type and click Next to continue.
If  the  router  detected  or  you  selected PPPoE,  enter  your  PPPoE  username  and 
password and click Next to continue. 
Note: Make sure to remove your PPPoE software from your computer. The software is 
no longer needed and will not work through a router.
If the router detected or you selected PPTP, enter your PPTP username, password, 
and other information supplied by your ISP. Click Next to continue.   
						

							15D-Link DIR-655 User Manual
Section 3 - Configuration
If the router detected or you selected L2TP, enter your L2TP username, password, 
and other information supplied by your ISP. Click Next to continue. 
If the router detected or you selected Static, enter the IP and DNS settings supplied 
by your ISP.  Click Next to continue.   
						

							16D-Link DIR-655 User Manual
Section 3 - Configuration
For both the 2.4GHz and 5GHz segments, create a wireless network a name (SSID) 
using up to 32 characters.
Create a wireless security passphrase or key (between 8-63 characters).  Your wireless 
clients  will  need  to  have  this  passphrase  or  key  entered  to  be  able  to  connect  to 
your wireless network.
Click Next to continue.
In  order  to  secure  your  router,  please  enter  a  new  password.  Check  the  Enable 
Graphical Authentication box to enable CAPTCHA authentication for added security. 
Click Next to continue.
Select your time zone from the drop-down menu and click Next to continue.