D-Link Dsh8 Manual

							
GE 
Security 
 P/N 1069172 • REV 1.0 • ISS 22FEB10 
 
GE-DSH-73/DSH-82/DSH-82-PoE 
User Manual  
 
 
  
						

							
Copyright  © 2010 GE Security, Inc. 
This document may not be copied in whole or in part or otherwise reproduced without prior 
written consent from GE Securit y, Inc., except where specifically permitted under US and 
international copyright law. 
Disclaimer   The information in this document is subject to change without notice. GE Security, Inc. 
(“GE Security”) assumes no respon sibility for inaccuracies or omissions and specifically disclaims 
any liabilities, losses, or risks, personal or ot herwise, incurred as a consequence, directly or 
indirectly, of the use or application of any of the contents of this document. For the latest 
documentation, contact your local supplier or visit us online at www.gesecurity.com. 
This publication may contain examples of screen captures and reports used in daily operations. 
Examples may include fictitious names of individuals and companies. Any similarity to names 
and addresses of actual businesses or persons is entirely coincidental. 
Trademarks and patents   GE and the GE monogram are trademarks of General Electric Company.  
Other trade names used in this document may be  trademarks or registered trademarks of the 
manufacturers or vendors of the respective products. 
Intended use   Use this product only for the purpose it was designed for; refer to the data sheet and user 
documentation for details. For the latest product information, contact your local supplier or visit 
us online at 
www.gesecurity.com. 
This product is intended to be supplied by a UL Listed Direct Plug-In Power Unit marked Class 2
 
or LPS and output rated 48 VDC, 380 mA minimum. 
 
 FCC compliance This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to part 15 of the FCC Rules. These limi ts are designed to provide reasonable protection against harmful interference when the equipmen t is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio 
communications.
 
You are cautioned that any changes or modifications not expressly approved by the party 
responsible for compliance could void the us ers authority to operate the equipment. 
 
 Regulatory information             N4131 
Manufacturer
 GE Security, Inc. 
HQ and regulatory responsibility: 
GE Security, Inc., 8985 Town Center Parkway, Bradenton, FL 34202, USA
 
EU authorized manufacturing representative: 
GE Security B.V., Kelvinstraat 7, 6003 DH Weert, The Netherlands
 
European Union directives   
  2002/96/EC (WEEE directive):  Products marked with this symbol cannot be disposed of as 
unsorted municipal waste in the European Union. For proper recycling, return this product to 
your local supplier upon the purchase of equivalent new equipment, or dispose of it at 
designated collection points. For more  information see: www.recyclethis.info.
 
Contact information  
For contact information see our Web site: www.gesecurity.com. 
For contact information see our Web site: www.gesecurity.eu. 
  
						

							
 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual i 
Content 
Chapter 1 Introduction   1 
Package Contents   
2  
Chapter 2  Installation   
11 
Hardware Description   
11  
Installing the Switch   
23  
Chapter 3  Network Application   
33 
Chapter 4  Console Management   
37 
Chapter 5  Web-Based Management   
43 
About Web-based Management   
43  
Requirements   
44  
Logging on the Switch   
44  
System   
46  
Port Management   
65  
Protocol   
76  
Security   
118  
Digital Input/Output (GE-DSH-73)   
129  
Power Over Ethernet (GE-DSH-82-PoE)   
131  
Factory Default   
135  
Save Configuration   
135  
System Reboot   
136  
Chapter 6  Command Sets   
137 
System Commands Set   
137  
Port Commands Set   
140  
Trunk Commands Set   
142  
VLAN Commands Set   
143  
Spanning Tree Commands Set   
145  
QOS Commands Set   
147  
IGMP Commands Set   
148  
MAC / Filter Table  Commands Set   
149 
SNMP Commands Set   
150  
Port Mirroring Commands Set   
153  
802.1x Commands Set   
154  
TFTP Commands Set   
156  
SystemLog, SMTP and Event Commands Set   
157   
						

							
 
ii GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
SNTP Commands Set   159 
X-ring Commands Set   
160  
PoE Command Set   
161  
Chapter 7  Switch Operation   
163 
Address Table   
163  
Chapter 8  Power Over Ethernet Overview   
165 
What is PoE?   
165  
Appendix A  RJ-45 Pin Assignment   
171 
Switchs RJ-45 Pin Assignments   
171  
10/100Mbps, 10/100Base-TX   
172  
Appendix B  Troubleshooting   
175 
 
  
						

							
 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 1 
Chapter 1 
Introduction  
   
GE-DSH-82 GE-DSH-82-PoE  GE-DSH-73 
 
The GE Security Managed Industrial Ethernet Switch series - the GE-DSH-82, GE-DSH-
82-PoE and GE-DSH-73 are multiple 10/100M bps ports Ethernet Switches with 
Gigabit TP/SFP fiber optical combo connective  ability and robust layer 2 features. The 
description of these models is below: 
 
GE-DSH-82  :  8-Port 10/100Base-TX + 2-Port Gigabit TP /SFP Combo Managed Industrial 
Ethernet Switch 
GE-DSH-82-PoE  :  8-Port 10/100Base-TX + 2-Port Gigabit TP/S FP Combo Managed Industrial PoE 
Switch 
GE-DSH-73  :  7-Port 10/100Base-TX + 3-Port Gigabit TP /SFP Combo Managed Industrial 
Ethernet Switch  
						

							
Chapter 1: Introduction 
2 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
Package Contents 
What’s in the box 
Open the Managed Industrial Switch box and carefully unpack it. The box \
should 
contain the following items: 
 
The Managed Industrial Switch x1 
User’s manual on CD  x1 
Installation Sheet  x1 
RJ-45 to RS-232 Cable  x1 
 
If any of these are missing or damaged, plea
se contact your dealer immediately, if 
possible, retain the carton including the  original packing material, and use them 
again to repack the product in case there is a need to return it to us. 
Product Description 
Enhanced Reliability for Industrial Networks 
The GE Security GE-DSH-82 series Managed In dustrial Ethernet Switch with multiple 
redundant ring technology is equipped wi th 8 10/100Mbps Fast Ethernet ports and 2 
Gigabit TP/SFP combo interfaces and the GE-DSH-73 is equipped with 7 10/\
100Mbps 
Fast Ethernet ports and 3 Gigabit TP/SFP co mbo interfaces. All of them are delivered 
in a rugged high-strength case. It is an in dustrially (substation) hardened and fully 
managed Ethernet Switch specifically desi gned to operate reliably in electrically 
harsh and climatically demanding environments. The GE-DSH-82 / GE-DSH-73\
 series 
is the most reliable choice for highly  managed and Fiber Ethernet applications. 
•  Wide Range Operating Temperature 
•  Redundant Ethernet Network 
•  Manageable 
•  Power Redundant 
•  Gigabit / Fiber uplink capability 
 
 
  
						

							
 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  3 
Fast Recovery to a Redundant Ethernet Network 
The GE-DSH-82 / GE-DSH-73 series features strong and rapid self-recovery capability 
to prevent interruptions and outside intrus ions. It incorporates advanced redundant 
data Ring technology; Rapid Spanning Pr otocol (IEEE 802.1w RSTP) and a redundant 
power supply system into customers in dustrial automation network to enhance 
system reliability and uptime in the harsh  factory environments. It also protects 
customers industrial network connectivity  with switching recovery capability that is 
used for implementing fault tolerant ring  and mesh network architectures.  If the 
Industrial network was interrupted accidenta lly, the fault recovery times could be less 
than 20ms to quickly bring the ne twork back to normal operation. 
 
Tough, Environmentally Hardened Design 
With IP-30 aluminum industrial case protection, the GE-DSH-82 / GE-DSH-73 series 
provides a high level of immunity agains t electromagnetic interference and heavy 
electrical surges which are usually found on pl ant floors or in curb side traffic control 
cabinets. The GE-DSH-82 / GE-DSH-73 series  also provides a wide range of power 
supply options suitable for multiple indust ries and for worldwide operation. The 
feature of operating temperature range from -40 to 75 Degree C allows the Managed 
Industrial Switch to be placed in  almost any difficult environment. 
 
Robust Layer 2 Features and Advanced Security 
The GE-DSH-82 / GE-DSH-73 series supports  robust advanced features including IEEE 
802.1Q VLAN, GVRP, Port link aggregation,  QoS, broadcast storm control, MAC 
address filtering, IGMP snooping enhanced se curity and bandwidth utilization to fit a 
variety of applications. Vi a aggregation of supporting po rt, the GE-DSH-82 / GE-DSH-
73 series allows the operation of high -speed trunk combining multiple ports. 
Maximum up to 4 ports of the GE-DSH-82 /  GE-DSH-73 series can be assigned for 4 
trunk groups and support fail-over as we ll. Additionally, its standard-compliant 
implementation ensures interoperability  with equipments from other vendors. 
Product Features 
• Physical Port 
o GE-DSH-82 

						

							
Chapter 1: Introduction 
4 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 

						

							
 Chapter 1: Introduction 
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual  5 
• Layer 2 Features 
o Complies with the IEEE 802.3, IEEE 802. 3u, IEEE 802.3ab, IEEE 802.3z Gigabit 
Ethernet standards 
o  Supports Auto-negotiation and half dupl ex/full duplex modes for all 10Base-
T/100Base-TX and 1000Base-T ports 
o  Auto-MDI/MDI-X detection  on each RJ-45 port 
o  Prevents packet loss with back pressu re (Half-Duplex) and IEEE 802.3x PAUSE 
frame flow control (Full-Duplex) 
o  Supports VLANs 

						

							
Chapter 1: Introduction 
6 GE-DSH-73/DSH-82 and DSH-82-PoE User Manual 
• Security 
o IEEE 802.1x Port-Based Authentication 
o  MAC address Filtering and MAC address Binding 
o  IP address security management to prevent unauthorized intruder 
o  Port Mirroring to monitor the incoming or  outgoing traffic on a particular port 
o  Management