D-Link Router AC1750 User Manual

							87
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
G\fest Zone
Check  to  a\f\fow  network  connectivity  between  the  different 
zones created. 
Check to enab\fe the Guest Zone feature for the 2.4 GHz band.
The schedu\fe of time when the Guest Zone wi\f\f be active. The 
schedu\fe may be set to  A\bways, which wi\f\f a\f\fow the particu\far 
service to a\fways be enab\fed. You can create your own times 
in the Too\bs > Schedu\bes section or c\fick Add.New.
Enter  a  wire\fess  network  name  (SSID)  that  is  different  from 
your main wire\fess network.
If you want to choose a security mode for the 2.4 GHz band, 
choose from the drop-down menu.
Check to enab\fe the Guest Zone feature for the 5 GHz band.
The schedu\fe of time when the Guest Zone wi\f\f be active. The 
schedu\fe may be set to  A\bways, which wi\f\f a\f\fow the particu\far 
service to a\fways be enab\fed. You can create your own times 
in the Too\bs > Schedu\bes section or c\fick Add.New.
Enter a wire\fess network name (SSID) that is different from your main wire\fess network.
If you want to choose a security mode for the 5 GHz band, choose from the drop-down menu.
Enable \bo\fting 
Between Zones:
Enable G\fest Zone: Sched\fle:
Wireless Network  Name:
Sec\frity Mode:
Enable G\fest Zone: Sched\fle:
Wireless Network  Name:
Sec\frity Mode: The Guest Zone feature wi\f\f a\f\fow you to create temporary zones that can be used by \buests to access the Internet. These zones wi\f\f be separate 
from your main wire\fess network. You may confi\bure different zones for the 2.4GHz and 5GHz wire\fess bands.  
						

							88
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
IPv6 Firewall
The  DIR-865L’s  IPv6  Firewa\f\f  feature  a\f\fows  you  to  confi\bure  which  kind  of  IPv6  traffic  is  a\f\fowed  to  pass  throu\bh  the  device. The  DIR-865L’s  IPv6 
Firewa\f\f functions in a simi\far \uway to the IP Fi\fters feature.
Check the box to enab\fe the IPv6 firewa\f\f simp\fe security.
Se\fect an action from the drop-down menu.
Enter a name to identify the IPv6 firewa\f\f ru\fe.
Use the drop-down menu to se\fect the time schedu\fe that the 
IPv6 Firewa\f\f Ru\fe wi\f\f be enab\fed on. The schedu\fe may be set 
to A\bways ,  which  wi\f\f  a\f\fow  the  particu\far  service  to  a\fways 
be  enab\fed.  You  can  create  your  own  times  in  the  Tools  > 
Sched\fles section. 
Use the  So\frce drop-down menu to specify the interface that 
connects to the source IPv6 addresses of the firewa\f\f ru\fe. 
Enter the source IPv6 address ran\be in the adjacent  IP Address 
\bange fie\fd.
Use the  Destination drop-down menu to specify the interface 
that connects to the destination IP addresses of the firewa\f\f ru\fe. 
Se\fect the protoco\f of the firewa\f\f port ( A\b\b, TCP , UDP , or ICMP ).
Enter the first port of the ran\be that wi\f\f be used for the firewa\f\f 
ru\fe  in  the  first  box  and  enter  the  \fast  port  in  the  fie\fd  in  the 
second box.
Enable IPv6 Simple  
Sec\frity:
Config\fre IPv6  Firewall:
Name:
Sched\fle:
So\frce:
IP Address \bange: Destination:Protocol:
Port \bange:  
						

							89
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
IPv6 \bo\fting
Check the box next to the route you wish to enab\fe. 
Enter a specific name \uto identify this route.
This is the IP address of the router used to reach the specified 
destination or enter the IPv6 address prefix \fen\bth of the packets 
that wi\f\f take this route. 
Enter the metric va\fue for this ru\fe here.
Use the drop-down menu to specify if the IP packet must use 
the WAN or LAN interface to transit out of the Router.
Enter the next hop that wi\f\f be taken if thi\us route is used.
\bo\fte List:
Name:
Destination IP/ Prefix Length:
Metric:
Interface:
Gateway:
This pa\be a\f\fows you to specify custom routes that determine how data is moved around your network.   
						

							90
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Admin
This pa\be wi\f\f a\f\fow you to chan\be the Administrator and User passwords. You can a\fso enab\fe Remote Mana\bement.  There are two accounts that 
can  access  the  mana\bement  interface  throu\bh  the  web  browser. The  accounts  are  admin  and  user.  Admin  has  read/write  access  whi\fe  user  has 
read-on\fy access. User can on\fy view the settin\bs but cannot make any chan\bes. On\fy the admin account has the abi\fity to chan\be both admin and 
user account passwords.
Tools
Here you can enter a new password for the Administrator Lo\bin 
Name. The administrator can make chan\bes to the settin\bs.
Enter  the  new  password  for  the  User  \fo\bin.  If  you  \fo\bin  as  the 
User, you cannot chan\be the settin\bs (you can on\fy view them).
Then enter the password a\bain for verification.
Enter a name for your router.
Enab\fes a cha\f\fen\be-response test to require users to type \fetters 
or numbers from a distorted ima\be disp\fayed on the screen to 
prevent  on\fine  hackers  and  unauthorized  users  from  \bainin\b 
access to your router’s network settin\bs.
Check  to  enab\fe  HTTPS  to  connect  to  the  router  secure\fy. This 
means to connect to the router, you must enter  https://192.168.0.1 
(for examp\fe) instead of  http://192.168.0.1 . 
Remote  mana\bement  a\f\fows  the  DIR-865L  to  be  confi\bured 
from the Internet by a web browser. A username/password is sti\f\f 
required to access the Web Mana\bement interface. 
The port number used to access the DIR-865L is used in the URL. Examp\fe:  http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of 
the DIR-865L and 8080 is the port used for the Web Mana\bement interface. If you have enab\fed  HTTPS.Server,  you must enter  https:// 
as part of the URL to access the router remote\fy.
This section wi\f\f \fist any ru\fes that are created. You may c\fick the  Edit icon to chan\be the settin\bs or enab\fe/disab\fe the ru\fe, or c\fick the 
De\bete  icon to remove the ru\fe.  Detai\bs wi\f\f disp\fay the current status of the ru\fe.
Admin 
Password:
Password:
Gateway Name:
Enable Graphical  A\fthentication:
Enable HTTPS  Server:
Enable \bemote  Management:
\bemote Admin  Port:
\bemote Admin  Inbo\fnd Filter:  
						

							91
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Time
Disp\fays the current date and time of the router.
Se\fect your Time Zone from the drop-down menu.
To  se\fect  Day\fi\bht  Savin\b  time  manua\f\fy,  se\fect  enab\fed  or 
disab\fed, and enter a start date and an end date for day\fi\bht 
savin\b time.
NTP is short for Network Time Protoco\f. A NTP server wi\f\f synch 
the time and date with your router. This wi\f\f on\fy connect to 
a server on the Internet, not a \foca\f server. Check the box to 
enab\fe this feature.
Enter  the  IP  address  of  a  NTP  server  or  se\fect  one  from  the 
drop-down menu.
To  manua\f\fy  input  the  time,  enter  the  va\fues  in  these  fie\fds 
for the Year, Month, Day, Hour, Minute, and Second and then 
c\fick Set. Time. 
You  can  a\fso  c\fick  Sync.Your.Computer’s. Time.Settings  to 
synch the date and time with the computer you are current\fy 
on.
Time:
Time Zone:
Enable Daylight  Saving:
Enable NTP Server:
NTP Server Used: Man\fal:
The Time Confi\buration option a\f\fows you to confi\bure, update, and maintain the correct time on the interna\f system c\fock. 
From this section you can set the time zone that you are in and set the Time Server. Day\fi\bht Savin\b can a\fso be confi\bured to 
automatica\f\fy adjust the tim\ue when needed.  
						

							92
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
SysLog
The  Broadband  Router  keeps  a  runnin\b  \fo\b  of  events  and  activities  occurrin\b  on  the  Router. You  may  send  these  \fo\bs  to  a 
SysLo\b server on your network.
Enable Logging to 
SysLog Server: Check this box to send the router \fo\bs to a SysLo\b Server.  
						

							93
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Email Settings
The Emai\f feature can be used to send the system \fo\b fi\fes, router a\fert messa\bes, and firmware update notification to your 
emai\f address. 
Enable Email 
Notification: 
From Email  Address:
To Email Address: SMTP Server Address:
SMTP Server Port: Enable 
A\fthentication:
Acco\fnt Name: Password:
On Log F\fll:
On Sched\fle: Sched\fle:
Details: When this option is enab\fed, router activity \fo\bs are emai\fed 
to a desi\bnated emai\f address.
This emai\f address wi\f\f appear as the sender when you receive 
a \fo\b fi\fe or firmware up\brade notification via emai\f.
Enter the emai\f address where you want the emai\f sent. 
Enter the SMTP server address for sendin\b emai\f. 
Enter the SMTP port used on the server.
Check this box if your SMTP server requires authentication. 
Enter your account for sendin\b emai\f.
Enter the password associated with the account. Re-type the 
password associated with the account.
When this option is se\fected, \fo\bs wi\f\f be sent via emai\f to your 
account when the \fo\b is fu\f\f.
Se\fectin\b this option wi\f\f s\uend the \fo\bs via ema\ui\f accordin\b to schedu\fe.
This option is enab\fe\ud when \fn.Schedu\be is se\fected. You can se\fect a schedu\fe from the \fist of define\ud schedu\fes.
To create a schedu\fe, \bo to Too\bs.>.Schedu\bes.
Here you can choose from a drop down menu whether emai\f \udetai\fs are kept in the \fo\b or \unot.  
						

							94
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Use this option to save the current router confi\buration settin\bs 
to a fi\fe on the hard disk of the computer you are usin\b. First, c\fick 
the Save .Configuration  button. A fi\fe dia\fo\b wi\f\f appear, a\f\fowin\b 
you to se\fect a \focation and fi\fe name for the settin\bs. 
Use  this  option  to  \foad  previous\fy  saved  router  confi\buration 
settin\bs. First, use the  Browse option to find a previous\fy saved fi\fe 
of confi\buration settin\bs. Then, c\fick the  Load button to transfer 
those settin\bs to the router. 
This  option  wi\f\f  restore  a\f\f  confi\buration  settin\bs  back  to  the 
settin\bs  that  were  in  effect  at  the  time  the  router  was  shipped 
from the factory. Any settin\bs that have not been saved wi\f\f be \fost, 
inc\fudin\b any ru\fes that you have created. If you want to save the 
current router confi\buration settin\bs, use the  Save button above. 
C\fick to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings 
from Local Hard  Drive:
\bestore to 
Factory Defa\flt  Settings:
\beboot Device:
System
This section a\f\fows you to mana\be the router’s confi\buration settin\bs, reboot the router, and restore the router to the factory 
defau\ft settin\bs. Restorin\b the unit to the factory defau\ft settin\bs wi\f\f erase a\f\f settin\bs, inc\fudin\b any ru\fes that you’ve created.  
						

							95
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Firmware
Choose File:
Upload: After you have down\foaded the new firmware, c\fick 
Choose.
Fi\be to \focate the firmware update on your 
hard drive.
C\fick Up\boad to comp\fete the firmware up\brade.
You can up\brade the firmware of the access point here. Make sure the firmware you want to use is on the \foca\f hard drive of the computer. C\fick on 
Choose.
Fi\be to \focate the firmware fi\fe to be used for the update. P\fease check the D-Link support website for firmware updates at  http://support.
d\bink.com. You can down\foad firmware up\brades to your hard drive from this site.
After you have down\foaded the new \fan\bua\be pack, 
c\fick Choose. Fi\be to \focate the \fan\bua\be pack fi\fe on 
your hard drive.
C\fick  Up\boad  to comp\fete the \fan\bua\be pack up\brade.
Lang\fage Pack
You can chan\be the \fan\bua\be of the web UI by up\foadin\b 
avai\fab\fe \fan\bua\be pack\us.
Choose File:
Upload: C\fick 
Check .Now   to  check  for  new  firmware  and 
\fan\bua\be pack versions on\fine.
Check Now:
Firmware Upgrade
You  can  chan\be  update  the  interna\f  router  software  by 
up\foadin\b a new firmware version.  
						

							96
D-Link DIR-865L User Manua\f
Section 3 - Confi\buration
Dynamic  Domain  Name  System  is  a  method  of  keepin\b  a 
domain name \finked to a chan\bin\b IP Address. Check the box 
to enab\fe DDNS.
Se\fect your DDNS provider from the drop-down menu or enter 
the DDNS server address.
Enter  the  Host  Name  that  you  re\bistered  with  your  DDNS 
service provider.
Enter the Username or key for your DDNS account.
Enter the Password or key for your DDNS account.
Enter a timeout time (i\un hours).
Disp\fays the current connection status.
Check the Enab\be box to enab\fe DDNS for IPv6 Hosts.
Se\fect your DDNS provider from the drop-down menu or enter 
the DDNS server address.
Enter the Host Name that you re\bistered with your DDNS service provider.
Disp\fays the \fist of active IPv6 Dynamic DNS addresses.
Enable Dynamic 
DNS:
Server Address: Host Name:
Username or  Key:
Password or Key: Timeo\ft:Stat\fs:
Enable DDNS for  IPv6 Hosts
IPv6 Address:
Host Name:
IPv6 DDNS List:
Dynamic DNS
The DDNS feature a\f\fows you to host a server (Web, FTP, Game Server, etc…) usin\b a domain name that you have purchased (www.yourname.com) 
with  your  dynamica\f\fy  assi\bned  IP  address.  Most  broadband  Internet  Service  Providers  assi\bn  dynamic  (chan\bin\b)  IP  addresses.  Usin\b  a  DDNS 
service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.