D-Link Router DIR-615 User Manual

41D-Link DIR-615 User Manual
Section 3 - Configuration
Access Control
Check the Enable Access Control check box 
and  click  the Add  Policy  button  to  start  the 
Access Control Wizard. 
Add Policy:
The  Access  Control  section  allows  you  to  control  access  in  and  out  of  your  network.  Use  this  feature  as  Parental 
Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from 
applications like PP utilities or games.
Click Next...

4D-Link DIR-615 User Manual
Section 3 - Configuration
Enter a name for the policy and then click Next to continue.
Access Control Wizard (continued)
Select  a  schedule  (I.E.  Always)  from  the  drop-down  menu 
and then click Next to continue.
Enter  the  following  information  and  then  click Next  to 
continue.
• Address Type - Select IP address, MAC address, or 
Other Machines.
•  IP  Address  -  Enter  the  IP  address  of  the  computer 
you want to apply the rule to. 

43D-Link DIR-615 User Manual
Section 3 - Configuration
Select the filtering method and then click Next to continue.
Access Control Wizard (continued)
Enter the rule:
 Enable - Check to enable the rule.
 Name - Enter a name for your rule.
 Dest IP Start - Enter the starting IP address.
 Dest IP End - Enter the ending IP address.
 Protocol - Select the protocol.
 Dest Port Start - Enter the starting port number.
 Dest Port End - Enter the ending port number.
To enable web logging, click Enable.
Click Save...

44D-Link DIR-615 User Manual
Section 3 - Configuration
Enter  the  keywords  or  URLs  that  you  want  to 
allow.  Any  URL  with  the  keyword  in  it  will  be 
allowed.
Website URL/
Domain:
Website Filters are used to allow LAN computers from accessing specific web sites by the URL or domain. A URL is 
a specially formatted text string that defines a location on the Internet. If any part of the URL contains the listed word, 
the site will be accessible. To use this feature, enter the text string to...

45D-Link DIR-615 User Manual
Section 3 - Configuration
Enter a name for the inbound filter rule.
Select Allow or Deny.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0 if 
you do not want to specify an IP range.
E n t e r   t h e   e n d i n g   I P   a d d r e s s .   E n t e r 
55.55.55.55 if you do not want to specify 
and IP range.
Click the Save button to apply your settings. 
You  must  click  Save  Settings  at  the  top  to 
save the settings.
This section...

46D-Link DIR-615 User Manual
Section 3 - Configuration
SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more 
state per session. It validates that the traffic passing through the session 
conforms to the protocol.
Select one of the following for TCP and UDP ports:
Endpoint Independent - Any incoming traffic sent to an open port will 
be forwarded to the application that opened the port. The port will close 
if idle for 5 minutes.
Address...

47D-Link DIR-615 User Manual
Section 3 - ConfigurationVPN Passthrough
RTSP
H.323
SIP (VoIP)
MMS
Application Level Gateway (ALG) Configuration
Here you can enable or disable ALG’s. Some protocols and applications require special handling of the IP payload to 
make them work with network address translation (NAT). Each ALG provides special handling for a specific protocol 
or application. A number of ALGs for common applications are enabled by \
default.
Allows multiple machines on the LAN to connect to...

48D-Link DIR-615 User Manual
Section 3 - Configuration
Set the transmit power of the antennas.
Beacons are packets sent by an 
Access Point to synchronize a wireless 
network. Specify a value. 100 is the 
default setting and is recommended. 
This value should remain at its default setting 
of 2432. If inconsistent data flow is a problem, 
only a minor modification should be made.
The fragmentation threshold, which is 
specified in bytes, determines whether packets 
will be fragmented. Packets exceeding...

49D-Link DIR-615 User Manual
Section 3 - Configuration
Enable the Wi-Fi Protected Setup feature. 
Locking the wireless security settings prevents 
the  settings  from  being  changed  by  the  Wi-Fi 
Protected Setup feature of the router. Devices 
can  still  be  added  to  the  network  using  Wi-Fi 
Protected Setup. However, the settings of the 
network  will  not  change  once  this  option  is 
checked.
A  PIN  is  a  unique  number  that  can  be  used 
to  add  the  router  to  an  existing...

50D-Link DIR-615 User Manual
Section 3 - Configuration
This Wizard helps you add wireless devices to the wireless network.
The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the 
PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup 
and has a configuration button, you can add it to the network by pressing the configuration button on the device and then 
the on...