D-Link Router DIR-635 User Manual

1D-Link DIR-635 User Manual
Section 3 - Configuration
Select Static  if  your  ISP  assigned  you  the  IP  address, 
subnet  mask,  gateway,  and  DNS  server  addresses.  In 
most cases, select Dynamic.
Enter  the  L2TP  IP  address  supplied  by  your  ISP  (Static 
only).
Enter  the  Subnet  Mask  supplied  by  your  ISP  (Static 
only).
Enter the Gateway IP Address provided by your ISP.
Enter the Server IP provided by your ISP (optional).
Enter your L2TP username.
Enter your L2TP password and...

D-Link DIR-635 User Manual
Section 3 - Configuration
MTU:
Clone MAC 
Address:
Maximum  Transmission  Unit - you may need  to change  the MTU for optimal  performance  with your specific ISP. 1492  is 
the default MTU.
The  default  MAC  Address  is  set  to  the  Internet  port’s  physical  interface  MAC  address  on  the  Broadband  Router.  It  is  not 
recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s 
MAC Address button to...

3D-Link DIR-635 User Manual
Section 3 - Configuration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The DNS server information will be supplied by your 
ISP (Internet Service Provider.)
Maximum  Transmission  Unit  -  you  may  need  to 
change the MTU for optimal performance with your 
specific ISP. 1492 is the default MTU.
The default MAC Address is set to the Internet port’s 
physical  interface  MAC  address  on...

D-Link DIR-635 User Manual
Section 3 - Configuration
Enter the IP address of the login server.
Enter your BigPond username.
Enter your BigPond password and then retype 
the password in the next box.
The DNS server information will be supplied 
by your ISP (Internet Service Provider.)
Maximum Transmission Unit - you may need 
to change the MTU for optimal performance 
with  your  specific  ISP.  1492  is  the  default 
MTU.
The  default  MAC  Address  is  set  to  the 
Internet’s physical...

5D-Link DIR-635 User Manual
Section 3 - Configuration
Check  the  box  to  enable  the  wireless  function.  If  you  do  not 
want to use wireless, uncheck the box to disable all the wireless 
functions.
Service Set Identifier (SSID) is the name of your wireless network. 
Create  a  name  using  up  to  32  characters.  The  SSID  is  case-
sensitive.
The Auto  Channel  Scan  setting  can  be  selected  to  allow 
the  DIR-635  to  choose  the  channel  with  the  least  amount  of 
interference....

6D-Link DIR-635 User Manual
Section 3 - Configuration
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-635. If Invisible is selected, 
the SSID of the DIR-635 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your 
DIR-635 in order to connect to it.
Refer to page 61 for more information regarding wireless security.
Visibility Status:
Wireless Security: 

D-Link DIR-635 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Enter  the  IP  address  of  the  router.  The  default  IP 
address is 192.168.0.1.
If you change the IP address, once you click Apply, 
you  will  need  to  enter  the  new  IP  address  in  your 
browser to get back into the configuration utility.
Enter the Subnet Mask. The default subnet mask is...

D-Link DIR-635 User Manual
Section 3 - Configuration
Check this box to enable the DHCP server on 
your router. Uncheck to disable this function.
Enter the starting and ending IP addresses for 
the DHCP server’s IP assignment.
Note:  If  you  statically  (manually)  assign  IP 
addresses to your computers or devices, make 
sure the IP addresses are outside of this range 
or you may have an IP conflict. 
The  length  of  time  for  the  IP  address  lease. 
Enter the Lease time in minutes.
Refer...

D-Link DIR-635 User Manual
Section 3 - Configuration
DHCP Reservation
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. 
The router will assign the IP address only to that computer or device. 
Note: This IP address must be within the DHCP IP Address Range.
Check this box to enable the reservation.
Enter  the  computer  name  or  select  from  the 
drop-down menu and click 

30D-Link DIR-635 User Manual
Section 3 - Configuration
The DIR-635 can be configured as a virtual server so that remote users accessing Web or FTP services via the public 
IP address can be automatically redirected to local servers in the LAN (\
Local Area Network). 
The DIR-635 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked 
with the DIR-635 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible 
from...