D-Link Router DIR-825 User Manual

							66D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateful)
Select IPv6 in IPv4 Tunnel from the drop-down 
menu.
Enter  the  settings  supplied  by  your  Internet 
provider (ISP). 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateless. Refer to the previous page 
for Stateful.
Enter  the  Router  Advertisement  Lifetime  (in 
minutes).
My IPv6 Connection:
IPv6 in IPv4 Tunnel 
Settings:
LAN IPv6 Address:
LAN Link-Local 
Address:
Enable 
Autoconfiguration:
Autoconfiguration Type:
Router Advertisement 
Lifetime: 
						

							67D-Link DIR-825 User Manual
Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateless)
Select IPv6 in IPv4 Tunnel from the drop-down 
menu.
Enter  the  settings  supplied  by  your  Internet 
provider (ISP). 
Enter  the  LAN  (local)  IPv6  address  for  the 
router. 
D i s p l a y s   t h e   R o u t e r ’ s   L A N   L i n k - L o c a l 
Address.
C h e c k   t o   e n a b l e   t h e   A u t o c o n f i g u r a t i o n 
feature.
Select Stateful (DHCPv6) or Stateless. Refer 
to the next page for Stateless.
Enter the start IPv6 Address for the DHCPv6 
range for your local computers.
Enter  the  end  IPv6  Address  for  the  DHCPv6 
range for your local computers.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
IPv6 in IPv4 Tunnel 
Settings:
LAN IPv6 Address:
LAN Link-Local 
Address:
Enable 
Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Range 
Start:
IPv6 Address Range 
End:
IPv6 Address Lifetime: 
						

							68D-Link DIR-825 User Manual
Section 3 - Configuration
Enter a new password for the Administrator Login Name. 
The administrator can make changes to the settings.
Enter the new password for the User login. If you login as 
the User, you can only see the settings, but cannot change 
them.
Enter a name for the DIR-825 router.
C h e c k   t o   e n a b l e   H T T P S   t o   c o n n e c t   t o   t h e   r o u t e r 
securely.
Remote management allows the DIR-825 to be configured 
from  the  Internet  by  a  web  browser.  A  username  and 
password is still required to access the Web-Management 
interface. In general, only a member of your network can 
browse  the  built-in  web  pages  to  perform  Administrator 
tasks. This feature enables you to perform Administrator 
tasks from the remote (Internet) host.
The port number used to access the DIR-825.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet  
IP address of the DIR-825 and 8080 is the port used for the 
Web Management interface. If you have enabled HTTPS 
Server and checked Use HTTPS, you must enter https:// 
as part of the URL to access the router remotely.
This section  will  list any rules  that are created. You may click the Edit icon  to change  the settings or enable/disable  the 
rule, or click the Delete icon to remove the rule.
Admin Password:
User Password:
System Name:
Enable HTTPS 
Server:
Enable Remote 
Management:
Remote Admin Port:
Inbound Filter:
Administrator Settings
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.  
There are two accounts that can access the management interface through the web browser. The accounts are admin 
and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot 
make any changes. Only the admin account has the ability to change both \
admin and user account passwords. 
						

							69D-Link DIR-825 User Manual
Section 3 - Configuration
Time Settings
Select  the  Time  Zone  from  the  drop-down 
menu.
To select Daylight Saving time manually, select 
enabled or disabled, and enter a start date and 
an end date for daylight saving time.
NTP  is  short  for  Network  Time  Protocol. 
NTP synchronizes computer clock times in a 
network of computers. Check this box to use a 
NTP server. This will only connect to a server 
on the Internet, not a local server.
Enter the NTP server or select one from the 
drop-down menu.
To manually input the time, enter the values 
in these fields for the Year, Month, Day, Hour, 
Minute, and Second and then click Set Time. 
You  can  also  click Copy  Your  Computer’s 
Time Settings.
Time Zone:
Daylight Saving:
Enable NTP Server:
NTP Server Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system 
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also 
be configured to automatically adjust the time when needed. 
						

							70D-Link DIR-825 User Manual
Section 3 - Configuration
SysLog
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs 
to a SysLog server on your network.
Enable Logging to 
SysLog Server:
SysLog Server IP 
Address:
Check  this  box  to  send  the  router  logs  to  a 
SysLog Server.
The address of the SysLog server that will be 
used  to  send  the  logs.  You  may  also  select 
your computer from the drop-down menu (only 
if receiving an IP address from the router via 
DHCP). 
						

							71D-Link DIR-825 User Manual
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files, router alert messages, and firmware update notification 
to your email address. 
Enable Email 
Notification: 
From Email 
Address:
To Email Address:
SMTP Server 
Address:
Enable 
Authentication:
Account Name:
Password:
On Log Full:
On Schedule:
Schedule:
When this option is enabled, router activity logs 
are e-mailed to a designated email address.
This  email  address  will  appear  as  the  sender 
when you receive a log file or firmware upgrade 
notification via email.
Enter  the  email  address  where  you  want  the 
email sent. 
Enter the SMTP server address for sending email. 
If  your  SMTP  server  requires  authentication, 
select this option.
Check  this  box  if  your  SMTP  server  requires 
authentication. 
Enter your account for sending email.
E n t e r   t h e   p a s s w o r d   a s s o c i a t e d   w i t h   t h e 
account. Re-type the password associated with 
the account.
When this option is selected, logs will be sent 
via email when the log is full.
Selecting this option will send the logs via email 
according to schedule.
This  option  is  enabled  when  On  Schedule  is  selected.  You  can  select  a  schedule  from  the  list  of  defined  schedules.  To 
create a schedule, go to Tools > Schedules. 
						

							72D-Link DIR-825 User Manual
Section 3 - Configuration
Use  this  option  to  save  the  current  router 
configuration settings to a file on the hard disk 
of the computer you are using. First, click the 
Save  button.  You  will  then  see  a  file  dialog, 
where you can select a location and file name 
for the settings. 
Use  this  option  to  load  previously  saved 
router  configuration  settings.  First,  use  the 
Browse  control  to  find  a  previously  save 
file  of  configuration  settings.  Then,  click  the 
Load button to transfer those settings to the 
router. 
This  option  will  restore  all  configuration 
settings back to the settings that were in effect 
at  the  time  the  router  was  shipped  from  the 
factory. Any settings that have not been saved 
will be lost, including any rules that you have 
created. If you want to save the current router 
configuration  settings,  use  the Save  button 
above. 
Click to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings from 
Local Hard Drive:
Restore to Factory 
Default Settings:
Reboot Device:
System Settings
This section allows you to manage the router’s configuration settings, reboot the router, and restore the router to the 
factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that 
you’ve created. 
						

							73D-Link DIR-825 User Manual
Section 3 - Configuration
Click on Check Now to find out if there is an 
updated  firmware;  if  so,  download  the  new 
firmware to your hard drive.
After you have downloaded the new firmware, 
click Browse to locate the firmware update on 
your hard drive.  Click Upload to complete the 
firmware upgrade.
Check Automatically  Check  Online  for 
Latest  Firmware  Version  to  have  the  router 
check  automatically  to  see  if  there  is  a  new 
firmware upgrade.
Check Email Notification of Newer Firmware 
Version to have the router send an email when 
there is a new firmware available.
Firmware Upgrade:
Browse:
Notifications 
Options:
Update Firmware
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of 
the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support 
site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the 
D-Link support site. 
						

							74D-Link DIR-825 User Manual
Section 3 - Configuration
Dynamic Domain Name System is a method of 
keeping a domain name linked to a changing 
IP Address. Check the box to enable DDNS.
Choose  your  DDNS  provider  from  the  drop 
down menu.
Enter the Host Name that you registered with 
your DDNS service provider.
Enter the Username for your DDNS account.
Enter the Password for your DDNS account.
Enter a time (in hours).
Displays the current connection status.
Enable Dynamic 
DNS:
Server Address:
Host Name:
Username or Key:
Password or Key:
Timeout:
Status:
DDNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have 
purchased  (www.whateveryournameis.com)  with  your  dynamically  assigned  IP  address.  Most  broadband  Internet 
Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in 
your domain name to connect to your server no matter what your IP addres\
s is. 
						

							75D-Link DIR-825 User Manual
Section 3 - Configuration
The Ping Test is used to send Ping packets to test if a 
computer  is  on  the  Internet.  Enter  the  IP  Address  that 
you wish to Ping, and click Ping.
The  results  of  your  ping  attempts  will  be  displayed 
here.
System Check
Ping Test:
Ping Results: