D-Link Router DVG-1402S User Manual

 
D-Link  
DVG-1402S 
 
 
2Voice + 4SW VoIP Router 
Manual 
 
 
Building Networks for People 
 
Version B.1   
  

 
 
Contents 
Package Contents........................................................................\
................................... 3 
Introduction........................................................................\
............................................. 4 
Rear Panel Connections ........................................................................\
......................... 5 
Front Panel LEDs........................................................................\...

 2
Home > VoIP > Manage Features > Reject Incoming Call........................................ 31 
Home > VoIP > Manage Features > Block Outgoing Call......................................... 32 
Home > DHCP........................................................................\
................................... 33 
Home > Proxy DNS ........................................................................\
........................... 35 
Advanced > Virtual Server...

 3
Package Contents 
• D-Link DVG-1402S Router 
• Power Adapter - AC 12V, 1.2A 
• Manual and Warranty on CD 
• Quick Installation Guide 
• Ethernet Cable (All the Ethernet ports on DVG-1402S are 
Auto-MDIX) 
Note: Using a power supply with a different  voltage rating than the one included with the 
DVG-1402S will cause damage and void the warranty for this product. 
If any of the above items are missing,  please contact your reseller. 
• System Requirements for Configuration 
• Ethernet-Based Cable or...

 
Introduction 
The D-Link DVG-1402S High-Speed VoIP Router Links traditional telephony networks 
to IP networks with conventional telephony devices such as analog phones or fax 
machines. It can reduce long distance p hone charges and deliver toll-quality voice 
communication over the IP network. This gateway provides two loop start Foreign 
Exchange Subscriber (FXS) ports and four LAN ports. One Ethernet port for a 
DSL/Cable Modem or other WAN devices,  and the other for connection to create a 
home...

Rear Panel Connections 
 5
 
 
 
 
 
 
 
 
  
 
 
 
Phone 
Connections
Connect to 
your phones 
using 
standard 
phone 
cabling. 
All Ethernet Ports (WAN 
and LAN) are auto 
MDI/MDIX, meaning
can use either a 
straight-through o
crossover Ethernet 
 you 
r a 
cable.
Auto MDI/MDIX 
LAN Ports 
Connect the 
Ethernet cable 
from computers 
on your LAN to 
these ports. 
Factory Reset 
Button 
Pressing this 
button will 
restore the router 
to its factory 
default settings. 
WAN PortPower 
Adapter Connect...

Front Panel LEDs 
 
Power LED
A solid light 
indicates a 
valid 
connection 
to the power 
supply. 
Status LED 
A blinking LED 
indicates the 
DVG-1402S is 
functioning 
properly. 
WAN LED 
An active LED 
indicates a link 
has been 
established. A 
blinking LED 
indicates 
activity on the 
WAN port. 
Phone LEDs 
The Hook LED will 
light when a 
telephone is off the 
hook. A blinking LED 
indicates an 
incoming call is 
detected. 
LAN LEDs 
An active LED indicates a 
link has been established. 
A...

 7
Features 
• 1 NWay 10/100BASE-TX Fast Ethernet port for 
WAN-connection 
• 4 NWay 10/100BASE-TX Fast Ethernet port for 
LAN-connection  
• 2 Foreign Exchange Subscriber (FXS) POTS ports (RJ-11 
Jacks) 
• Voice Activity Detection (VAD) /Comfort Noise Generation 
(CNG) 
• Silence suppression to reduce bandwidth consumption. 
• Adaptive jitter buffer for a smooth voice reception 
• Lost packet recovery ability for improved voice quality 
• Support QoS (Quality of Servic e) for voice quality guarantee....

 8
 
 
Installation 
For a typical setup at home, please do the following: 
1.You will need broadband Internet access (a Cable or DSL-subscriber line 
into your home or office) 
2. Consult with your Cable or DSL provider for proper installation of the 
modem 
3. Connect the Cable or DSL modem to  the DVG-1402S VoIP Router (see the 
printed Quick Installation Guide included with your router.) 
4. Install the D-Link DFE-530TX+ adapter into a desktop computer. The four 
Ethernet LAN ports of th e DVG-1402S...

Using the Configuration Wizard   
 9
192.168.15.1  
 
               
 
 
 
 
 
 
 
 
 
 
Whenever you want to configure 
your network or the DVG-1402S, 
you can access the Configuration 
Menu by opening the web-browser 
and typing in the IP Address of the 
DVG-1402S. The DVG-1402S 
default IP Address is shown to the 
right:
 
• Open the web browser 
• Type in the IP Address of the
Router   (http://192.168.15.1)
• Type admin in the User Name
field 
• Type admin in the Password
field 
• Click OK 
 
The...